|
Builds (and builds only) Got a build thread? It goes here, build threads anywhere else on the forum will be locked and never moved. |
|
Thread Tools | Display Modes |
06-26-2012, 10:19 PM | #1 |
My build to get ready for curacao drift event!!!!! lots of pics
So after I got contacted to see if I would be interested in going to curacao for a drift event. I pulled the blown KA out and got started on bulding the motor and doing all the misc stuff i need/wanted to do to the car to get everything ready for the event. Its been a ruff few weeks trying to get everything ready and good to go I literally got the car running on Thursday and tuned it on Saturday. Sunday got the car aligned did little stuff here and there and monday loaded it up in the container. Pretty much 4 drivers here from florida got invited to take our cars to compete against the drivers over in curacao and aruba.
To start Finally bought some cp pistons pulled the motor and took it apart My friend and I working on putting the fuse boxes inside under the dash Got a new radiator/fan setup and freshly painted the engine bay working on the motor. motor has 9:1 cp pistons arp head studs, arp rod bolts felpro head gasket and put in some new rod bearings. My friend Rodd came through and help me get the car to another shop to finish other stuff needed. started working on a mid mount. did a knuckle mod finally after 6-7 years started working on exhaust stuff then took it to get wired an tuned first time being on the dyno car made 304hp 283 tq on 14lbs once the car gets back from curacao the car is gunna get some changes and retuned then I should be at where i wanna be which is 350-375 went to get the car aligned then went to the port to get shipped to curacao more from loading day. the bmw container lol heres a vid of the dyno video-2012-06-16-15-48-57.mp4 video by datboidriftin - Photobucket |
|
Sponsored Links |
Bookmarks |
|
|