Land Speed 240SX Build Thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hybrid DET · 01-30-2012, 10:26 PM

Hi everyone,

Since I've been "lurking" on this forum since '04, I figured it was time I actually create my first thread. I'm currently building an S13 hatch with the goals of joining the Bonneville 200 mph club and breaking the SCTA blown gas coupe (BGC) "G" class record.

I first went to Bonneville a few years back in my SR20DET powered 1988 Sentra to join the USFRA 130 and 150 mph clubs. After battling the weather for two years I was finally able to get the job done.

Here's a you tube clip below of my 159 MPH run. Skip ahead in the video. Unfortunately, I didn't have any video editing software back then.

B12 Sentra at 159 MPH - YouTube

Ever since, I've been wanting to go back to conquer the 200 mph club but this time in my S13 hatch. I couldn't bring myself to tear apart my street driven S13 so I ended up buying another hatch.

Update 4/24/12:

For those of you wanting to read more in depth on the project click here for some detailed articles. Thanks!

hybrid DET · 01-30-2012, 10:34 PM

We started out by gutting out the interior

Once the interior was stripped out we used dry ice to remove the sound deadening.

Heat on other areas...

Then used a wire wheel to remove all the left over crap.

We used a grinder and a spot weld drill to remove random brackets in the interior.

More to come...

ixfxi · 01-31-2012, 12:17 AM

can i have your interior if there are still parts leftover?

i could use all that, thanks

s-cargo · 01-31-2012, 09:06 AM

sweet b12!! what motor trans do you plan on using in the s13??

10psitx · 01-31-2012, 09:56 AM

great project, please keep us updated on your progress...
We are also planning a few projects for this year. namely a texas mile s14 coupe and a rwd conversion on an Infiniti g20 to help showcase our fabrication skills, as we are currently putting a shop together. Good luck with your build, looks to be off to a good start.

conrad_s13.5 · 01-31-2012, 10:16 AM

motoiq watermarks,...means this will probably be amazing

ixfxi · 01-31-2012, 10:45 AM

Quote:

Originally Posted by conrad_s13.5

motoiq watermarks,...means this will probably be amazing

motoiq = mike kojimas grubby hands are all over this

btw, kinda shocked that they used a torch to remove that deadening. thats a kinda roundabout way of doing it, imo.

nomoremk2 · 01-31-2012, 10:58 AM

Very cool to see something different being done with the 240. I'll be watching this.

hybrid DET · 01-31-2012, 01:24 PM

Quote:

Originally Posted by ixfxi

m

btw, kinda shocked that they used a torch to remove that deadening. thats a kinda roundabout way of doing it, imo.

The sound deadening in some areas can't be removed by the dry ice method. Instead, we had to use a torch, melt, and scrape it off in those areas.

...and sorry, the interior is already gone.

hybrid DET · 01-31-2012, 01:34 PM

Quote:

Originally Posted by s-cargo

sweet b12!! what motor trans do you plan on using in the s13??

Thanks for the compliment on the B12. Its been in my family since it was new and I've been building it since about '93. It was featured in SCC a while back... I'm sure its floating around the net somewhere.

I'll be using a SR20DET at the factory 2.0L displacement since that is the ceiling for the SCTA "G" engine class. The transmission I'm going to use is still in the air, but I do have a 3.133 FD that'll help get me across the 200 mph mark.

TheRealSy90 · 01-31-2012, 02:23 PM

Looking forward to updates.

A putty knife and rubber mallet would have got the fender tar off with a quickness. Did my whole car that way in a hour, way better than dry ice but more labor intensive haha.

s13 @ fullboost · 01-31-2012, 02:28 PM

what motor and trans set up did you have in mind?

Crondy · 01-31-2012, 03:10 PM

wtfiwantupdates

hybrid DET · 02-03-2012, 07:46 PM

Removing the glass preparing for the cage fab...

Off to Pierce Motorsports in Torrance for the cage.

Main hoop, diagnol, and a pillar bars in place.

A-pillar gusseting

B-Pillar gusseting

89JDM240sx · 02-03-2012, 08:25 PM

Good stuff looking good so far!

KravingAKouki · 02-03-2012, 09:27 PM

wow that would be so fun to compete in man, goodluck with the build man. always wanted a hatch to build for something crazy. i think i found my goal haha nice build man

RunninWild · 02-03-2012, 10:22 PM

Rad! Do you plan on having it ready this year?

hybrid DET · 02-07-2012, 07:44 PM

Quote:

Originally Posted by RunninWild

Rad! Do you plan on having it ready this year?

I hope to have it done in time to run a few shake down runs at El Mirage and secure the necessary licensing. Then, Speed Week in August!

sil80d · 02-07-2012, 10:11 PM

Was the b12 at jccs a few years back?

Imarvin240 · 02-07-2012, 11:28 PM

nice looking cage, excited to see this done!

hybrid DET · 02-09-2012, 04:25 PM

Quote:

Originally Posted by sil80d

Was the b12 at jccs a few years back?

yes sir. its been there a couple times.

hybrid DET · 04-23-2012, 09:49 AM

Started working on the suspension bits. Ended up installing some KW variant 3 bodied coilovers with the KW's competition internals. Pretty trick set up.

You can read more on it here.

Next up, some SPL Pro Suspension goodness.

hybrid DET · 04-23-2012, 10:00 AM

I havent really updated this thread in awhile and just realized that I never put up pictures of the finished cage. Enjoy!

Here's a link to the article on the cage build.

WanganNastyMachine · 04-23-2012, 11:39 AM

Subscribing! Awesome build this far. What did you use to coat your wheel wells? I reallyl like the way it came out.

Mike

pacotaco345 · 04-23-2012, 12:03 PM

Wow.. this car has better suspension than most that actually go around corners. Cool build!

hybrid DET · 04-23-2012, 12:36 PM

Quote:

Originally Posted by WanganNastyMachine

Subscribing! Awesome build this far. What did you use to coat your wheel wells? I reallyl like the way it came out.

Mike

We used POR-15 to coat the wheel wells hoping that it would give a bit more corrosion resistance against the salt of Bonneville. The silver is UV sensitive so if its in an area that sees a lot of sun, you definitely need to top coat it. We'll see how it holds up in the wheel well when we race at El mirage. It will have to withstand being pelted by a lot of rocks and other debris.

WanganNastyMachine · 04-23-2012, 01:03 PM

Quote:

Originally Posted by hybrid DET

We used POR-15 to coat the wheel wells hoping that it would give a bit more corrosion resistance against the salt of Bonneville. The silver is UV sensitive so if its in an area that sees a lot of sun, you definitely need to top coat it. We'll see how it holds up in the wheel well when we race at El mirage. It will have to withstand being pelted by a lot of rocks and other debris.

I figured it was a corrosion protection coating considering what the car is being built for.

Amazing work on the chassis thus far, I'll be staying tuned. Best of luck to you sir!

Flicktitty · 04-23-2012, 01:09 PM

pretty cool stuff thus far. Best of luck with it.

What power plant?

hybrid DET · 04-23-2012, 02:07 PM

Quote:

Originally Posted by pacotaco345

Wow.. this car has better suspension than most that actually go around corners. Cool build!

Yeah, it's actually a bit overkill for a land speed car. Since my wife and I use to race with NASA, I wanted to build the car so it could be used for road racing after I get these Bonneville thing out of my system.

hybrid DET · 04-23-2012, 02:10 PM

Quote:

Originally Posted by Flicktitty

pretty cool stuff thus far. Best of luck with it.

What power plant?

We are currently running a 2.0L SR20DET for one engine class and then building a 92 MM stroker SR20DET (2,162 cc) on the side for the next class up.

01-30-2012, 10:26 PM	#1
hybrid DET Leaky Injector Join Date: Jun 2004 Location: cal Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	Land Speed 240SX Build Thread Hi everyone, Since I've been "lurking" on this forum since '04, I figured it was time I actually create my first thread. I'm currently building an S13 hatch with the goals of joining the Bonneville 200 mph club and breaking the SCTA blown gas coupe (BGC) "G" class record. I first went to Bonneville a few years back in my SR20DET powered 1988 Sentra to join the USFRA 130 and 150 mph clubs. After battling the weather for two years I was finally able to get the job done. Here's a you tube clip below of my 159 MPH run. Skip ahead in the video. Unfortunately, I didn't have any video editing software back then. B12 Sentra at 159 MPH - YouTube Ever since, I've been wanting to go back to conquer the 200 mph club but this time in my S13 hatch. I couldn't bring myself to tear apart my street driven S13 so I ended up buying another hatch. Update 4/24/12: For those of you wanting to read more in depth on the project click here for some detailed articles. Thanks! Last edited by hybrid DET; 04-24-2012 at 09:00 AM..

01-31-2012, 10:16 AM	#6
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	motoiq watermarks,...means this will probably be amazing __________________ cONtRol FReAkS

01-31-2012, 02:28 PM	#12
s13 @ fullboost Post Whore! Join Date: Dec 2007 Location: St.Petersburg,FL Posts: 2,549 Trader Rating: (15) Feedback Score: 15 reviews	what motor and trans set up did you have in mind? __________________

02-03-2012, 08:25 PM	#15
89JDM240sx Zilvia Member Join Date: Jan 2012 Location: Newark Nj Posts: 235 Trader Rating: (0) Feedback Score: 0 reviews	Good stuff looking good so far! __________________ Boost makes me sooooooo happy!

02-03-2012, 10:22 PM	#17
RunninWild Join Date: Nov 2009 Location: Idaho Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	Rad! Do you plan on having it ready this year? __________________ eeeezzzbro.blogspot.com

01-30-2012, 10:34 PM	#2
hybrid DET Leaky Injector Join Date: Jun 2004 Location: cal Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	We started out by gutting out the interior Once the interior was stripped out we used dry ice to remove the sound deadening. Heat on other areas... Then used a wire wheel to remove all the left over crap. We used a grinder and a spot weld drill to remove random brackets in the interior. More to come...

01-31-2012, 12:17 AM	#3
ixfxi Post Whore! Join Date: Apr 2006 Location: bangin on my chest Account: BANNED #fucksupreme Age: 82 Posts: 5,932 Trader Rating: (3) Feedback Score: 3 reviews	can i have your interior if there are still parts leftover? i could use all that, thanks

01-31-2012, 09:06 AM	#4
s-cargo Zilvia Member Join Date: Mar 2008 Location: Myrtle beach sc Age: 38 Posts: 250 Trader Rating: (2) Feedback Score: 2 reviews	sweet b12!! what motor trans do you plan on using in the s13??

01-31-2012, 09:56 AM	#5
10psitx Zilvia Member Join Date: Jan 2012 Location: La Grange Texas Age: 49 Posts: 274 Trader Rating: (1) Feedback Score: 1 reviews	great project, please keep us updated on your progress... We are also planning a few projects for this year. namely a texas mile s14 coupe and a rwd conversion on an Infiniti g20 to help showcase our fabrication skills, as we are currently putting a shop together. Good luck with your build, looks to be off to a good start.

01-31-2012, 10:58 AM	#8
nomoremk2 Zilvia Member Join Date: Sep 2010 Location: South jersey Age: 34 Posts: 293 Trader Rating: (1) Feedback Score: 1 reviews	Very cool to see something different being done with the 240. I'll be watching this.

01-31-2012, 03:10 PM	#13
Crondy Zilvia Member Join Date: Jul 2011 Location: Holland Age: 31 Posts: 174 Trader Rating: (1) Feedback Score: 1 reviews	wtfiwantupdates

02-03-2012, 07:46 PM	#14
hybrid DET Leaky Injector Join Date: Jun 2004 Location: cal Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	Removing the glass preparing for the cage fab... Off to Pierce Motorsports in Torrance for the cage. Main hoop, diagnol, and a pillar bars in place. A-pillar gusseting B-Pillar gusseting

02-03-2012, 09:27 PM	#16
KravingAKouki Zilvia Junkie Join Date: Sep 2011 Location: Not FAILorida Posts: 431 Trader Rating: (2) Feedback Score: 2 reviews	wow that would be so fun to compete in man, goodluck with the build man. always wanted a hatch to build for something crazy. i think i found my goal haha nice build man

02-07-2012, 10:11 PM	#19
sil80d Zilvia Addict Join Date: Sep 2006 Location: phx Age: 51 Posts: 732 Trader Rating: (12) Feedback Score: 12 reviews	Was the b12 at jccs a few years back?

02-07-2012, 11:28 PM	#20
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	nice looking cage, excited to see this done! __________________ https://instagram.com/eck_matthew/

04-23-2012, 09:49 AM	#22
hybrid DET Leaky Injector Join Date: Jun 2004 Location: cal Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	Started working on the suspension bits. Ended up installing some KW variant 3 bodied coilovers with the KW's competition internals. Pretty trick set up. You can read more on it here. Next up, some SPL Pro Suspension goodness.

04-23-2012, 10:00 AM	#23
hybrid DET Leaky Injector Join Date: Jun 2004 Location: cal Posts: 99 Trader Rating: (2) Feedback Score: 2 reviews	I havent really updated this thread in awhile and just realized that I never put up pictures of the finished cage. Enjoy! Here's a link to the article on the cage build.

04-23-2012, 11:39 AM	#24
WanganNastyMachine Zilvia Junkie Join Date: Jan 2011 Location: Maryland, USA Age: 32 Posts: 468 Trader Rating: (3) Feedback Score: 3 reviews	Subscribing! Awesome build this far. What did you use to coat your wheel wells? I reallyl like the way it came out. Mike

04-23-2012, 12:03 PM	#25
pacotaco345 Zilvia FREAK! Join Date: Jan 2010 Location: SoCal/Ft Worth TX Age: 30 Posts: 1,563 Trader Rating: (5) Feedback Score: 5 reviews	Wow.. this car has better suspension than most that actually go around corners. Cool build! __________________

04-23-2012, 01:09 PM	#28
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 37 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	pretty cool stuff thus far. Best of luck with it. What power plant? __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo