1jz s13 drift car. (pic heavy)

[Javier13]

I just finished swapping a 1jz into my car and man it took me a while haha, ill get into every little detail and hopefully people who do this swap will have a greater knowledge and learned something from me posting all this crap.

(NOTE!!!! IF YOU GUYS ARE DOING A 1JZ SWAP AND NEED A INSIGHT OR HELP WITH SOMETHING PLEASE SEND ME A EMAIL [email protected] AND ILL ANSWER IT AS SOON AS I CAN! ^.^

also if you need any fabrication or knukles hit up my buddy http://odysseypartsshop.bigcartel.com/
All the fabrication work done on this car was done by him and everything is quality work

Set-up: 408hp 386tq
Stock 1jz bottom end and head(from jdm miami)
Ebay t4 manifold welded t3 flange(cheap)
440cc injectors (aristo jdm injectors 2jz)
Circuit Sport FPR a little above 3bar (~45.23psi) ran one on the sr and works amazing
Aem EMS v2 honda box(driftmotion but don't use the jumper harness)
NGK BKR7E gapped 0.024
Tuned by Martin owner of R.S. Enthalpy
Holset He351(5.9L dodge cummins)
tial 44mm 1.3bar spring
tial q bov
Mid mount intercooler(ebay)
R154 extended 3"
one piece driveshaft(local)
sikky sway bar
Wilwood 3/4 clutch master cylinder w/ a adapter
Xcessive motor/trans bracket
Xcessive motor mount and trans mount (I first had circuit sports motor mounts and sat way to fucking low don't use anything else but Xcessove IMO)
Open downpipe (ran out of money to make a full exhaust)
3" intercooler piping
oem flywheel cut
ACT clutch 6puck sprung heavy duty PP
Oil relocation
oil cooler
power steering cooler
Mark Panic milspec wiring harness
custom chassis harness with the bare necessities
AN fittings and lines for everything!!!!!!!!!!!! (erals, russel, and xrp stuff)
circuit sports catch can
isis sr20det radiator
ebay silicone hose chopped up
4" inlet for turbo
HKS mushroom filter
isis radiator for sr20det
stock thermostat
12" x2 electric pull fans (will add 2 more fans on the intercooler to make sure i never over heat)
stock thermostat(going to get another one in the future that opens up cooler, and possibly a swirl pot)

suspension-
front:
Sikky sway bar
hicas steering rack
Odyssey Parts Shop knuckles
25mm extended control arms and boxed
abercombie outer tie rods
tien inner tie rods
fortune auto coilovers 10k
era1 offset rack spacers
energy suspesnion steering rack bushings
Dif steering link solid bushing
spl tension rod
215/40/17 federal evo's... will be going to 235 in the future just that was all i could find at the time

rear:
circuit sports control arms
stock rear LCA
stock sway bar
fortune auto coils 8k
245/40/17 nexen n3000 (these are grippy and last forever )
spl solid subframe bushings


brakes:
all stainless steel lines that i made from earls fittings and lines
z32 front hawk hp + pads
stock rear calipers hawk hp + pads (fucking work awesome when locking up the rear)
S14 brake booster
oem master cylinder

Driveline:
Act clutch
wilwood 3/4 clutch master cylinder
stainless steel 3an clutch line
one piece driveshaft
nismo 2-way
napa reman axles
r154

interior:
custom chassis harness i made(i am in the future going to re-do the harness since its a mess since i was such in a rush to get the car finished so i can focus on school)
stri tachometer, boost gauge
PBM EVDM for oil pressure and water temp
Speed hut fuel level gauge
AEM wideband
sparco sprint 5
RJS cam lock harness
Harness bar
(a bolt in cage will come soon just need more money)
Era1 shift knob(its too tall I might get something shorter or get their other shift knob)






putting back the skid plate before heading to the dyno






















facebook link of the response the car has
https://www.facebook.com/photo.php?v...72417989066220

https://www.facebook.com/photo.php?v...e=3&permPage=1
for this video just bare with it till the end and you can see how responsive this 1j is

1st time out in the car @3:15



first event in the JZ powerplant


Bank Run:



I will be positing everything from when i first got the car with a single cam to a dual cam to a sr then to jz. And will get into my backgorund and how i got into drifting and cars. Hope you guys enjoy this build!

[Javier13]

Background info on me and my car. I'm currently a full time student at FAU pursuing Mechanical Engineering and a minor in Mathematics in Boca Raton,FL. I'm originally from Tampa. I love drifting, friends, studying, and keeping to myself a lot lol. I got my 240 when i was 15. I enjoy all music Hardcore, Rap, Metal ect... I'm also a huge video game, anime and manga nerd. I love that shit. I'll list my favorite music, manga, anime, and my dream car list, just so you guys can know who i really am!

Dream Car set-up:
Jzx100-Daily/drift car
newer f350- daily/tow rid
930 RWB Porsche-garage car
r32 4door w/ a 1jz- Competitive drift car

Favorite Bands/Artist:
Issues
The Tempations
Micheal Jackson
Memphis Mayfire
Underoath
Daft Punk
Suicide Silence
Biggy
2-pac
SOD
A7X
TDWP
Blink-182
R, Kelly
Usher
Dream Theater
Green Day
The HAARP Machine
Old Kayne West stuff(his new shit sucks and has no feel to it)
BMTH
Sky Eats Airplanes
Miss May I
Final Fantasy Soundtracks
The Bunny The Bear
Anime OP's and ED's
Outkast
The Drifters
ECT..... i like anything haha except country!

Anime:
Too many to list but just a small list
Kill La Kill
SAO
Gintama
One Piece
really the list is ongoing for fucking ever this includes manga too

Video Games:
All RPG's (Dragon Quest, FF series, Zelda series, Pokemon, Fallout series, KH series, Ni No Kuni, Tales of series, Persona series, Xenosaga series... ect..)
I hate xbox, love sony and i own every sony console except the PS4 because i rather have cool drift car
And select shooter like Titan Fall, Bioshock, and BF games.


I love my family and would do anything for them. And they're are my biggest supporters especially my mom who's an angel who's put up with all my shit almost getting arrested for street sliding, helping me pay for events when I didn't have money. Taking me to school when I broke something on the 240 haha.
My brother who's car really made me want a 240 so much. He was also a big help on helping install all the motors ive gone through, pulling all nighters getting my jz finished up and getting it to the dyno.

There's a shit ton of people that have helped me but you guys would hate me if i continued, but the last kid is seriously my right hand man along with my best friend my little cousin. Now this kid has been with me through hell and back with this build, with hoping onto of curbs (which ill get to further in the story), when i was sliding my car in the rain and we flew into the woods right in-between 2 fucking trees and came out with out a scratch and continued to slide. But we've been through a bunch of shit lol. this dude is rad as fuck is another big supporter of mine.

Now with the build starting all the way back in 2009 when i first bought the 240 it was single cam 5 speed for $700. I Didn't know how to drive stick for shit and thought myself and drove around in a 4x4 single cam 240. I also had no mechanic skill what so fucking ever.
1st thing i ever did was weld the diff so I can slide in the back of my school which was all dirt. Had a fucking blast in the schools parking lot.

Then i bought my first set of old rusty as fuck stance coilovers, control arms all circuit sports, and 5 lug from Ichiba and a bunch of other suspension goodies to get ready to go drifting. (**Note fuck ichiba and their customer service better off just going with isis or oem shit**). But I became best friends with the dude who was with the dude who sold me the stance coilovers.


Sean who was the kid who sold me the coilovers was with who is now my best friend Tyler and the kid that got me into drifting. Here's his old s13 (which you guys can all hate on but we trashed that shit after he hit a gaurd rail a couple times lol) and his 1JZ (which was the main reason i went 1jz) LS400 which we also junked due to money issues with his buisness.













The ls400 I helped him build was on stance nations facebook, and we junked it and sold everything off of it so he could get more money for his business.


and there it goes lol!!!

Back to the main story.

A couple weeks after I threw on all the new suspension parts i blew my single cam. Pissed as fuck I had no idea what was going on with the car. It had threw a rod and knocked. This was where I learned how to work with cars and swapped a dual cam into the car. And with the dual cam I did literally everything to swap it in with no knowledge of mechanic.

Then went to my first event at cfrc, I was such a noob and didnt know i needed a helmet and my friend had let me borrow his. And god damn i blew so much dick rode the hell out of the clutch and burnt up the oem clutch disk. Smelled like straight ass hair burning the whole 2 hour drive. My aunt helped me out and bought me a ebay clutch (Which went through so much abuse and never let me down ever!!!!!)

Then I went to my second event full auto at the st. pete times forum. This is where I finally knew what the hell to do. Had a lot of people jump in the car with me and helped me out. I still sucked of course but i was progressing. (I was also straight pipe ka24de which was fucking terrible and obnoxious)






Then i continued going to events and street sliding with my buddy Tyler and kevin for the rest of the year. And started getting good!









Then I fucking shredded through my wiring harness and a bunch of other shit street sliding. The car never ran right ever again. so it was parked for a while and had to get it towed home. (which happened a lot when i went SR20)



Then my buddy let drive his sr20 and fell in love it. So I worked my ass off throughout the winter break doing odd jobs here and there to save up for a sr and other parts for it. Then after all the hard work it paid off so nicely! Still was 16 and did my 1st sr swap alone, man did i do a shitty job.





I then blew the clutch on the sr and yes it was a ebay clutch i didnt know any better!!





Tried swapping out the clutch with a local company that made them to slide at the 1st frankenslide event at cfrc. Missed it because I didn't adjust the pedal correctly and the car wouldn't go into gear. Knowing that now i felt like such a noob and felt so left out at that event )):




After i got the car running good is started to just load up on tires and just fucking destroy them.



















Tried manjing down a main road and fucked everything up suspension wise on the car. The stance coils beffy as fuck were the old part on the driver side that didnt get destroyed.





























got solid rear bushings for the car to start making my suspension set-up better



Blew 4 transmissions it never eneded haha!!

[Javier13]

Last event before i tore everything down to get more power out of the t25.

Got wheels for getting straight A's my mom is awesome haha!!!








My friend fucking with me when i was buying something at the store haha!!

Now i start my tear down to go external wastegate, z-maf, 560cc injectors, and 1bar of boost.








Fucking loved this set-up!!! It was so awesome to hear a external wastegate for the 1st time ever!!!!!




Made more torque than i did power on this set-up hahaha!!!!! if anyone wants more power out of their t25 this is the best route to go!!!
New Setup . - YouTube

Raced my friend before we went street sliding and walked him haha (not really)




I started to get more consistent with my driving and the car linking the bank entry











end of the day blew up the clutch on the car due to blowing up my fucking transmission had to get another transmission and clutch and this time I didn’t fucking cheap out on the clutch set-up!!






(random picture at my school with my auto teacher haha)

[Javier13]

Then I sold my coils and got myself some new fortune auto coils and they’re amazing!!!


Got new gloves for Christmas from my mom, such a bad ass mom haha!!

Then saw a group buy from chaser aero on their kits and got one

lots of adjusting had to happen






Then I got a pit bull puppy that was about to get euthanized. PEOPLE ADOPT YOUR PETS!!!!!! Shes such a sweet dog and loves children and people!
Got tires for the upcoming event

Yes I drove like this for a while and eve at the event since I was trying to wrap my dash but didn’t finish on time

pics from the event with aero on well ½ of it on haha





Picture of the motor set-up

Then I bought a 4runner for a daily so I could save up and build the car better and man did I love the A/c haha!!
Picked up a new ebay exhaust from some dude

We cut the shit out of the fart can and welded a 3”to4” reducer and a 1’ 4” stainless

It looked really rowdy and sounded so mean! And painted the aero all one color! Was loving this car so much!!!
Got more tires from tireman ybor

Then off to my next event loved this car so much and it drove like a dream







Saved up a shit ton of money and bought sweet fucking gauges and made the cluster from a cnc machine and had it powdered coated.


Then pulled out all the interior in the car while hanging out with my other dog Oreo

then got a deal on a t28 from a local for 100$

and got a new tial qr bov.


After installing the new turbo went and did a burnout in my drive way haha

Got the car tuned again to make sure I get everything out of this t28 on 1bar of boost

Made 298hp and 305tq
After the dyno I wanted to build up my suspension for more angle
OPS knukles

25mm extended control arms

offset rack spacers

abercombie tie rods


Got an alignment at a buddys shop
Front: Camber -5 Toe 0 Caster 7.5
Rear:Camber -.5 Toe0
Afterwards did a little shake down before I went to events again.

Car felt awesome and even faster. I never was consistent with my set-ups. I was always changing something ever 3 months to the car. So I never go use to the new set-ups for long.
Then went to another event in the car and I fucking killed it…. Seriously!

album of pictures from the event
https://www.facebook.com/pedro.j.ort...2524121&type=3
Videos from that day:



Best video of the night linking the whole bank.

I fucked shit up that day, broke the inner bolt on the offset rack spacer, fucked up my intercooler and had it ziptied, blew off couplers left and right. But I had a fucking blast that day
Then I went off to school for the fall semester 300miles away. leaving the car home and drove the 4runner. I had withdrawals like crazy lol.
During school really didn’t do anything car related since I barley went home. But I did pick up a sponsor while I was gone and had my brother drive to their shows to show off my car

[Javier13]

Then after the fall semester I went on winter break and went to another event at Desoto. I slide fucking terribly, the motor didn’t have enough power to spin new 245’s on 40psi and I was just frustrated trying to feel the car. Along with that day the cage drivers went about 1000x’s more than non cage drivers so I got no seat time. Then just fed up with the motor I sold everything off. And my frined talked me into buying a 1JZ and man I was down for over a year doing this swap and commuting back and forth to school.









Sold everything in my car and garage sr related after the event

[Javier13]

After selling everything i started to buy all the parts necessary. also re-did my cluster due to the fact that the old apexi tachometer did not read correctly and made another cluster and bought a stri 60mm tachometer



boxes of parts and parts


44mm tial


holset he351 before powder coating


ebay manifold, cheap as shit and it works, but i did brace it with stainless steel rods


ebay intercooler core


my friend welding the flange on manifold


welding the wastegate flap for external set-up


aem 3.5 bar map sensor


how the garage was for most of the time since i was at school and couldnt really work on the car


plasti dipped the car, hating it so much now cant wait to get it painted with actual real paint.....


t3 flange on a t4 manifold


powder coated rear housing on the manifold


front housing


picked up the motor in miami while i was at school. the motor sat in the back of my 4runner for like 3 weeks haha


tore it down


painted it






bought real tools to start building up my collection


stripping everything


replaced everything that i could timing belt, water pump, all gaskets ect..




breathers for the valve cover to catch can


test fitting everything


fuel lines all an russel shit


stripping interior to re-wire chassis




































re-did everything on the chassis harness to switchs and relays and kill swich blah blah blah






brake lines


engine bay ready for the motor

[Javier13]

r154 extension 3"


























forgot to add i gave my mom my 4runner and bought my self a f350 w/ a 7.3






uhaul trailers suck for low cars

went to the dyno and my sensors were not reading right and so i had to sort the problem with little time i had before i went back to school so i gave up on it and asked Mark Panic to make me a harness.








the before and after haha

brother made the labels for the switch panel


got new tires for all my wheels


the car made awesome power and torque, and my 1st time driving it tuned blew up my diff was scary haha and locked up my rear end when i was braking. so my buddy sold me his nismo 2-way


forgot to wire up windshield wipers haha


forgot to put this in here but this is my high pressure power steering line from the rack to the pump


driving the car around and having fun in it finally!










now im back at school getting by barley and busting my ass to finish this semester hoping that i can keep my gpa where its at lol.




random pics lol

[Javier13]

Things left to do on the car as of now to make it ready for the track

mount fire extinguisher
buy a new helmet
install a new brake booster
clean up the chassis harness
check the torque on all bolts
get an alignment

then go out drifting once again!!!

[Rafi Casas]

Hey nice ride,

Im actually applying to FAU (mechanical engineering)

[Javier13]

cool dude, awesome campus, engineering isn't the best here but the classes are small so the teacher will get to know you better. As of now, my strengths of materials class has 40 students. I think at UF they had over 150 students lol

[benarovi]

nice thread. gonna drive pbir in march??

[Javier13]

im going to try, but its all about the money and if my truck wants to cooperate with me and fucking run correctly. i still need to do a shake down somewhere to get a feel for the power of the car. Its making over 100 more than my sr20det.

[benarovi]

is it registered? theres some sweet spots around. can always go to skidpad down in mia there fun to tandem me and a few friends are going to go the 22nd to practice for pbir. im super rusty lol

[xoxide]

Ben's trying to recruit everyone to PBIR hahah -_-


Glad you posted a build thread, its a lot easier to follow than your facebook album.

[Javier13]

Id only have the money for pbir. and its registered but the luxury of just having a truck and towing the car to events is just a lot more convenient. I might just hit up a local spot by my house in tampa and see how the car reacts. no problem! I'd like to help out others with suspension, and with 1jz swaps. yea my fb build is everywhere haha

[Oakville]

Nice car man. Im in deerfield beach quite a bit, you have this car with you up in boca?

[Javier13]

No my car is my home in tampa, i go to school in boca. But I do plan to trailer the car down for local events around the Boca Raton area.

[benarovi]

Originally Posted by xoxide

Ben's trying to recruit everyone to PBIR hahah -_-


Glad you posted a build thread, its a lot easier to follow than your facebook album.

because they dont have enough people to go so they stopped. its 20 min from my house, the last time i drove it, there were maybe 7 people driving including me. yea you get alot of seat time but its more fun with more people. tracks sick, just paved, no bumps anywhere and its good on tires.

[Javier13]

i need $480 to be able to run that day, thats for my plane ticket home, diesel for the truck, fuel for the car, trailer rental, alignment, diesel back, and plane ticket back to school lol. Ill try my hardest i have $130 to my name right now.

[KravingAKouki]

Uhaul trailers are terrible for low cars. The wheel tracks have the angled "lip" pieces in the middle, and will pinch the frame rails. I had to try the wooden blocks as well, and it was terrible. Better off investing in a trailer at this point. Never looking back, and they could be had at a deal if you are looking thoroughly. Love the car, keep it up!

[Javier13]

Thanks dude, and ill get one once i get a job over the summer, or a internship. And for the future when money is good heres what i plan on getting done
-Cosmis MRII and S5R's or some wheels with lip
-over fenders
-crash bars
-bolt in cage(I'm never going to do Pro-Am or crap like that. I just want to tandem at local events and have fun!)
-isis dual 4" exhaust
-326 power wing(some knock off one since im cheap)
-bride reps(Sprint 5 sparco seat sucks but does a bad ass job)
-PBM rear drop knuckles(car is super low and want to make the geometry of my arms, and axle as level as possible!)
-dual caliper set-up (With a pbm hydro with wilwood reservoir, my own lines, and wilwood calipers)
-repaint the car red, i hate plastidip so fucking much i tolerate it because my brother paid for everything and even sprayed it but never again.

[xoxide]

Tell me about Uhaul trailers -_-



Im going to try and make PBIR Ben, but unless my car is running prime and I have a cage im not making that far of a trip to drift alone all day lol

[Javier13]

i said fuck it and just jacked my car onto the trailer and pushed it with 5 people haha. the car is going to go into a wall one day and my frame is already FUBAR

[BiG MiKE86]

nice! lOVE this build

[Javier13]

thanks for checking it out!!! I'll be sure to update as much as possible. Nothing really much to do to the car except take it to events and work out what ever bugs come my way with it.

[d_nice]

looks good bro

[Javier13]

pretty terrible news, so i owe my school money a lot. so i won't be able to go to any events for a while........ sucks but shit happens. if im able to sell my spare wiring harness and some other things in my garage that i dont need then i would be good. so does anyone need a jza70 1jz wiring harness uncut?

[badass8]

Damn good work. Love the tow truck by the way.

Do you have a run down on whats needed for a 1jz swap?

I originally planned to do 1uzfe swap because its different and its a great motor but thinking to shovel out some extra cash and do a 1jz swap and not sure where to find a run down of whats needed.

[Javier13]

everything is posted on the list on the first post. like everything that i can think of.

but ill post here also,
wiring harness conversion
extension for the transmission 3"
motor mount brackets from xcessive or any company
hit the trans tunnel out to fit starter and what not
driveshaft
intercooler piping
exhaust
its just like an sr swap necessities or any motor swap for that matter.

[CoupedupRB]

Read it.

Like it.