Enjuku Racing - Precision 5128 Turbo Chargers - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enjuku Racing · 03-24-2013, 02:22 PM

Enjuku Racing - Precision 5128 Turbo Chargers

Precision PT4828 Turbocharger - Nissan SR20DET - Nissan SR20DET

PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• Higher efficiency and faster transient response for maximum power and performance
• 51mm inducer compressor wheel
• Compressor cover options:
- "B" compressor cover 2.8" inlet/2.0" outlet
- "E" compressor cover 3.0" inlet/2.0" outlet
• 53.8mm, 76 trim turbine wheel
• Turbine housing options:
- T25 .64, .86 A/R wastegated
- T3 .48 A/R with 5 bolt discharge (with wastegate hole)
• Wastegate actuator included with "B" compressor cover and T25 housing

These are Amazing Turbo chargers!! Rated to 450+ HP Easily!!!

sideways_s14 · 03-24-2013, 03:52 PM

nice, wish there was an exhaust housing available a bit bigger for an rb25

edpogi · 03-24-2013, 05:48 PM

Shipped to Las Vegas, nv 89146

Gar9854 · 03-25-2013, 08:24 AM

Any idea on how these compare to the 64 or 86 AR GR2871r's

smink · 03-25-2013, 08:31 AM

Shipped to wv 26431?

Enjuku Racing · 03-25-2013, 09:23 AM

Quote:

Originally Posted by Gar9854

Any idea on how these compare to the 64 or 86 AR GR2871r's

Your 2871R and 5128 utilize very similar sized turbine and compressor wheels, but the 5128 utilizes a smaller diameter center shaft portion on the CEA compressor wheel (due to the material and design it can use less material and still be as rigid) allowing the overall length/surface area of each individual blade to be larger. The larger surface area allows the turbo to generate a bit more power than a comparably sized 2871R.

white-s13coupe · 03-25-2013, 07:02 PM

price shipped to 11596...

also i bought an isis ka cold pipe
and i want to buy the m-spec intercooler kit...

can you leave out the cold pipe and include the greddy bov flage instead for the same price ???

Enjuku Racing · 03-26-2013, 11:54 AM

PM's sent!

Also for the intercooler piping question, call the shop (352)241-8399 and speak with one of the sales reps and they should be able to get that taken care of for you.

Enjuku Racing · 03-26-2013, 12:02 PM

Quote:

Originally Posted by sideways_s14

nice, wish there was an exhaust housing available a bit bigger for an rb25

They are offered in a T3 turbine housing with .48 A/R.

slickdrifter · 03-26-2013, 11:37 PM

price shipped to 97080 with t3 housing..

evan_aggie · 03-27-2013, 06:55 AM

2 questions.

1) It appears that this compressor housing has holes drilled on the underside such that it can be re-clocked 180 degrees. Application: 300zx TT. Can you confirm if this can be used on a vg30dett?

2) How much for (2) shipped to 78613.

Thanks,
E

Enjuku Racing · 03-29-2013, 03:35 PM

PM's sent!

03-24-2013, 02:22 PM	#1
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	Enjuku Racing - Precision 5128 Turbo Chargers Enjuku Racing - Precision 5128 Turbo Chargers Precision PT4828 Turbocharger - Nissan SR20DET - Nissan SR20DET PTE's Direct Replacement Performance Upgrade Turbochargers feature the following: • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA) • Higher efficiency and faster transient response for maximum power and performance • 51mm inducer compressor wheel • Compressor cover options: - "B" compressor cover 2.8" inlet/2.0" outlet - "E" compressor cover 3.0" inlet/2.0" outlet • 53.8mm, 76 trim turbine wheel • Turbine housing options: - T25 .64, .86 A/R wastegated - T3 .48 A/R with 5 bolt discharge (with wastegate hole) • Wastegate actuator included with "B" compressor cover and T25 housing These are Amazing Turbo chargers!! Rated to 450+ HP Easily!!! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

03-24-2013, 03:52 PM	#2
sideways_s14 Zilvia Member Join Date: Jul 2003 Location: Nickle&Dime, CA Posts: 210 Trader Rating: (8) Feedback Score: 8 reviews	nice, wish there was an exhaust housing available a bit bigger for an rb25 Last edited by sideways_s14; 03-24-2013 at 05:46 PM..

03-24-2013, 05:48 PM	#3
edpogi Leaky Injector Join Date: Feb 2004 Location: lansdale, pa Posts: 81 Trader Rating: (4) Feedback Score: 4 reviews	Turbo Shipped to Las Vegas, nv 89146

03-25-2013, 08:31 AM	#5
smink Zilvia Member Join Date: Feb 2009 Location: wv Age: 36 Posts: 180 Trader Rating: (11) Feedback Score: 11 reviews	Shipped to wv 26431? __________________

03-25-2013, 07:02 PM	#7
white-s13coupe Leaky Injector Join Date: Nov 2012 Location: long island Age: 36 Posts: 131 Trader Rating: (1) Feedback Score: 1 reviews	$$$o0 price shipped to 11596... also i bought an isis ka cold pipe and i want to buy the m-spec intercooler kit... can you leave out the cold pipe and include the greddy bov flage instead for the same price ???

03-25-2013, 08:24 AM	#4
Gar9854 Zilvia Member Join Date: Oct 2011 Location: Atlanta Posts: 172 Trader Rating: (0) Feedback Score: 0 reviews	Any idea on how these compare to the 64 or 86 AR GR2871r's

03-26-2013, 11:54 AM	#8
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	PM's sent! Also for the intercooler piping question, call the shop (352)241-8399 and speak with one of the sales reps and they should be able to get that taken care of for you. __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

03-26-2013, 11:37 PM	#10
slickdrifter Zilvia Junkie Join Date: Jan 2003 Location: P-town Posts: 319 Trader Rating: (3) Feedback Score: 3 reviews	price shipped to 97080 with t3 housing..

03-27-2013, 06:55 AM	#11
evan_aggie Join Date: Jul 2011 Location: Austin Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	2 questions. 1) It appears that this compressor housing has holes drilled on the underside such that it can be re-clocked 180 degrees. Application: 300zx TT. Can you confirm if this can be used on a vg30dett? 2) How much for (2) shipped to 78613. Thanks, E

03-29-2013, 03:35 PM	#12
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	PM's sent! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]