Godspeed Project Steering Rack Adapter/Spacer Issue - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xs420240sx · 07-06-2013, 02:28 PM

I just got one of the Godspeed style steering rack adapters, not the 2 little rings, but the full bolt on goes on the passenger side adapter for my S14. I first tried installing it with stock length inner tie rods, that didn't work and I got too much toe in but I almost expected this. So I went with some new 300zx inners and tried with that. The passenger side with the spacer I was able to get aligned pretty straight but when I went to the driver side with the ring spacer, I ran out of threads and couldn't get the wheel toed in enough, it was toed out due to the shorter 300zx inners. My only thought now is to switch out the driver side 300zx inner back to a stock length inner. This was all after I re-centered my rack after getting around 3.8 turns. Has anyone else had problems with these spacers other than your inners being too long?

07-06-2013, 02:28 PM	#1
xs420240sx Zilvia Junkie Join Date: Jun 2011 Location: CA Posts: 595 Trader Rating: (5) Feedback Score: 5 reviews	Godspeed Project Steering Rack Adapter/Spacer Issue I just got one of the Godspeed style steering rack adapters, not the 2 little rings, but the full bolt on goes on the passenger side adapter for my S14. I first tried installing it with stock length inner tie rods, that didn't work and I got too much toe in but I almost expected this. So I went with some new 300zx inners and tried with that. The passenger side with the spacer I was able to get aligned pretty straight but when I went to the driver side with the ring spacer, I ran out of threads and couldn't get the wheel toed in enough, it was toed out due to the shorter 300zx inners. My only thought now is to switch out the driver side 300zx inner back to a stock length inner. This was all after I re-centered my rack after getting around 3.8 turns. Has anyone else had problems with these spacers other than your inners being too long?