s15 to s13 side skirts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KAT-PWR · 04-17-2015, 11:48 PM

Start with your OEM s15 side skirt ($100

)

Cut about 3in out a ways back from the front to leave the locking mechanism intact...obviously

I used a dremel for this. The most important part when it come to bodywork is to create a V shaped valley

I used epoxy to meld the two pieces together, i put the epoxy in the back of the cut then put the section i cut out in with epoxy for added strength

Feather that shit out

Hey look it fits pretty good although the front sections is a bit longer than stock s13 fenders

The rear also needs a little spacer. deal with it or do some tricky body work

Bushido · 04-18-2015, 12:28 AM

Legit. I like S15 style

KAT-PWR · 04-18-2015, 12:30 AM

In progress

Artworks · 04-18-2015, 08:41 AM

high five

zenki-s13 · 04-18-2015, 11:46 AM

Looks good!!

What kind of rear valence is that?

KAT-PWR · 04-18-2015, 01:24 PM

Border racing valance

*brndck* · 04-20-2015, 11:16 PM

NOT BAD!!!! i like the DIY style.

Slammed Assassin · 04-20-2015, 11:21 PM

Not bad! Looks pretty good!!!

04-17-2015, 11:48 PM	#1
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	s15 to s13 side skirts Start with your OEM s15 side skirt ($100 ) Cut about 3in out a ways back from the front to leave the locking mechanism intact...obviously I used a dremel for this. The most important part when it come to bodywork is to create a V shaped valley I used epoxy to meld the two pieces together, i put the epoxy in the back of the cut then put the section i cut out in with epoxy for added strength Feather that shit out Hey look it fits pretty good although the front sections is a bit longer than stock s13 fenders The rear also needs a little spacer. deal with it or do some tricky body work __________________ MRP Manufacturing Last edited by KAT-PWR; 04-18-2015 at 01:21 PM..

04-18-2015, 12:28 AM	#2
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,563 Trader Rating: (10) Feedback Score: 10 reviews	Legit. I like S15 style __________________

04-18-2015, 12:30 AM	#3
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	In progress __________________ MRP Manufacturing

04-18-2015, 01:24 PM	#6
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	Border racing valance __________________ MRP Manufacturing

04-20-2015, 11:21 PM	#8
Slammed Assassin Nissanaholic! Join Date: Feb 2007 Location: Oxnard/SV Posts: 2,065 Trader Rating: (34) Feedback Score: 34 reviews	Not bad! Looks pretty good!!! __________________

04-18-2015, 08:41 AM	#4
Artworks Leaky Injector Join Date: Jul 2013 Location: - Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	high five

04-18-2015, 11:46 AM	#5
zenki-s13 Leaky Injector Join Date: Jan 2014 Location: Las Vegas Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	Looks good!! What kind of rear valence is that?