Master Guide for Aftermarket Seats

[A Spec Products]

bride FG or nagisa auto LP rails will work on recaro.

if its a side mount seat, any side mount seat rail should work.

[i8yourfwd]

1. S13 no sunroof
2. Sparco Sprint
3. $200
4. Bucket
5. OEM sliders with custom brakets
6. Custom, you know the banging, drilling, cutting, beautiful stuff. Also the tearing apart of the stock seat :P
7. 5'11 about 160lbs
8. Surprisingly enough the good ol magical install guy (same guy dad did "Dorifto?!"s brackets) did such a great job that it sits at stock height, if not a little lower. So headroom is great, I'm sure I'll have room for a helmet.
9. Fits me great, weightwise, not much more. Height, hmm maybe a few inches taller. Shorter, duh of course.
10. Pics coming soon!

[Nan Desu Ka?!]

dont you just love my magic install guy?

[i8yourfwd]

Originally Posted by i8yourfwd

1. S13 no sunroof
2. Sparco Sprint
3. $200
4. Bucket
5. OEM sliders with custom brakets
6. Custom, you know the banging, drilling, cutting, beautiful stuff. Also the tearing apart of the stock seat :P
7. 5'11 about 160lbs
8. Surprisingly enough the good ol magical install guy (same guy dad did "Dorifto?!"s brackets) did such a great job that it sits at stock height, if not a little lower. So headroom is great, I'm sure I'll have room for a helmet.
9. Fits me great, weightwise, not much more. Height, hmm maybe a few inches taller. Shorter, duh of course.
10. Pics coming soon!

pics:

Beeehooold OEM sliders!






There's a headroom pic, with me not even sitting all the way back. LOTS of room, considering I'm 5'11

[Nan Desu Ka?!]

why does ur seat/hair look blue? ur cam is messed up fool. (should be all black...)

[mixedwell]

i only want to say this once.. but half of you guys need to clean your rides! ok nomore playing mom for you guys.

-

[i8yourfwd]

bah.. it's clean enough..

[lilredstiffy]

1. S13/sunroof
2. Recaro Pole Position
3. 599 MSRP?
4. Bucket
5. Nagisa Auto
6. Two or three washers on left rail
7. 5"8 165
8. Headroom ok? Yes
9. Perfect for me, not for fatties or tallies
10.

[trackstar]

[QUOTE=lilredstiffy]1. S13/sunroof
2. Recaro Pole Position
3. 599 MSRP?
4. Bucket
5. Nagisa Auto
6. Two or three washers on left rail
7. 5"8 165
8. Headroom ok? Yes
9. Perfect for me, not for fatties or tallies
10.
[QUOTE]

That's the exact setup I'll be installing next weekend. However, neither Recaro nor Nagisa provided me with the bolts to attach the seat to the bracket. Any idea on the size for those?

[lilredstiffy]

I bummed the bronze colored bolts holding my stock seat onto the stock rails- they fit. If you don't want to do that do the home depot match up a bolt trip with one of those.

[2JZGTE]

1. S13
2. Bride zetaIII FIA approved
3. $630 shipped
4. Bucket seat
5. Bride FX bracket (aluminum non-sliding bracket)
6. Bracket mods- None
7. 5'8"- 150lbs
8. Have more headroom than pretty much every seat on here
9. Seat fits me perfect but can't fit a finger between my hips and seat.
10. Pics coming tonight! (To give you an idea, look at Bomex180's red zetaIII and lower it another 4")

The only other thing I had to do for install was bang out some of my floor. The bride FX bracket puts the seat SOO low that the bottom of my seat hits the floor. If it's headroom you're looking for get the FX bracket from bride.

As for the low max seats, they look cool but there is no way they will get much lower than my seat, as mine already hit the floor until I banged it out. It's more or less the bracket that puts the seat down low.

I put the front bolts up a notch higher like Aaron mentioned, it reclines bucket seats more than enough to be comfortable, and LOL, it's a lot like being hugged non-stop. I think mine's super comfy.

Billy

[Chin180sx]

What fabric is the Exas III made out of?

[mr_240sx]

1. s13 with sunroof
2. Momo RS-GT
3. $400 cdn. ea.
4. Bucket
5. Custom braket.
6. all custom.
7. 6feet and 180lbs
8. ummm, 1.5 inch clearance. i do hit on some hard bumps
9. the seat is quite snug on me. PS: i dont fit in sparco torino's.
10. please dont mind the pics, some were taken when i first put the seats in which my car was rusted back then. i completely restored it this winter!!

[boost infested]

1. S13/sunroof
2. Bride Ergo?
3. Cheap
4. Reclinable
5. Bride bracket
6. no bracket mods required
7. I am 5'7
8. lots of head room, with bride rail its loooww..
9. I am 170lbs, this seat is just perfect.
10.

[BOMEX180]

1. S13 NO sunroof
2. Bride GIAS
3. MSRP 1775
4. Reclinable
5. Bride LR(bracket/sliders)
6. no bracket mods required
7. I am 5'10
8. around 5in of headroom
9. I am 175lbs, this seat is very comfortable.

[White]

Anyone have any experience with Weapon-R brackets for 240s? Can't seem to find any info on any 240 forums.

[Giant Robot]

1. S14 no sunroof
2. Bride Brix I passenger side
3. enough
4. reclinable
5. Bride MO
6. none
7. 5'5" 150lbs
8. TONS of headroom WITH helmet on
9. best reclineable seat i have ever sat in. the Leg bolsters are the biggest bolsters ever. The seat sits deep, cushion is so plush and the fabric is the toughest ive seen. More tough than Recaro's. Highly recommended reclineable.




1. S14 no sunroof
2. Bride Zeta II driver side
3. enough
4. Bucket
5. Nagisa Auto super low rails
6. none
7. 5'5" 150lbs
8. TONS of headroom WITH helmet on
9. fits awesome. Sits very deep. Shoulder bolster hugs you. SUPER lightweight seat. I can literally hold the seat with one hand up. Fabric is stretchy and flexible, but not nearly as tough as the Brix I. Cushions are soft and replaceable. Nams rails make it sit lower and more adjustability than Bride FG's. Solid bucket that is also highly recommended. Comparable to Recaro SPG's

[trackstar]

Finally get to contribute to my own thread:

1. S13, no sunroof
2. Recaro Pole Position
3. Retail $599
4. Bucket
5. Nagisa
6. None to rail itself; however, slide lever was hitting the trunk/gas filler release lever, so I had to remove the plastic cover off the trunk release lever and slot the bracket to move to it down a bit. Also there is a weld nut on the inner seat rail to reattach the oem lap belt, but there is no way it would fit between the seat and the center console, so I ditched the lap belt, using lap belt from 5 pt harness + oem shoulder belt on the street.
7. 6'3, 200 lbs
8. Headroom ok? Yes, several inches of clearance when using the lowest setting to mount the seat
9. Seat is very comfortable, but tight in the thighs and shoulders. If you have a waist much bigger than my 34", or chest bigger than my 44", you will probably be very uncomfortable.
10. Pics

[JDMs13]

What the fuck are some of you saying "enough" for price paid. Why not just say what the fuck you paid. Gotta be raw dogs and just say enough.
pshhhhhhhhhh.

[A Spec Products]

1. S13 w/ sunroof
2. Sparco Evo
3. $639 retail
4. Bucket
5. NAGISA AUTO SUPER LOW POSITION RAILS of course
6. None, bolts right in. But yeah, like trackstar I had to take off the plastic cover for the trunk release. But I WAS ABLE to use the OEM lap belt clip, but mine came from my S14 seats so it might differ on stock S13.
7. 5'10 180lbs 34 waist
8. Yes, more clearance but I still rub helmet once in a while, might differ depending on helmet size. Its the stupid sunroof moulding.
9. Seat fits perfect, wish there was more side bolster like Pro2000, but comfy on long drives.
10.

[Tygma]

S13 No sunroof
Bride Zeta III L
600-650 retail, not what I payed.
Bucket
Nagisa rails
Needed to use some washers on one of the holes, but it's a solid bracket.
6' 150lbs
Loads of clearance
Great seat, period.

[jookybanana]

1. S13/sunroof
2. Bride Vios 3
3. ~$750
4. Bucket
5. Bride FG (waiting for LF rail, i will update when i get LF to compare)
6. none
7. 5'6" 135lbs
8. like 5"+ Headroom
9. fits very good, lots more room than the zeta2 neos
10. Pics

[S13 Charlie]

Jooky - I'll be installing that setup tonight (ViosIII and FG rail) do you have any problems getting in and out of the car? I'll probably have to get a quick release in the near future..

[blackflag_Rms13]

Anyone use JIC Seats? Or have any opinions?
http://nonstopmotorsports.com/JIC_seats.htm
They may not be real JIC but I have no idea?
http://www.sportcompactcarweb.com/pr...projectsilvia/
It seems SCC used so they must be legit.

[revat619]

A buddy of mine has those JIC seats in his s14. This one to be exact -



I've sat in them myself, and to be honest, they feel A LOT like r32/33 gtr seats. Just a taaaaaaad bit more bolstering. Seriously, I wouldn't be surprised if i found out they actually used the gtr seats as a template.

[chmercer]

lol, that takata seatbelt pad is GAYYYYYYYYYYYYYYYYYYYY.

you are all fools for paying for whack ass 750$ brides when recaro is cheaper.

anyone know where i can get a cheap ass passenger side s14 seat rail for a sparco sprint? or speed? i forget which one it was.

[Tygma]

Originally Posted by chmercer

you are all fools for paying for whack ass 750$ brides when recaro is cheaper.

anyone know where i can get a cheap ass passenger side s14 seat rail for a sparco sprint? or speed? i forget which one it was.

I've had like 7 seats, and Bride fits me the best.
-Recaro pole position in my GTi
-Sparco Rev in my FC
-S14 seat in my S13
-Sparco Sprint in my S13
-Skyline GTR seat in my S13
-Recaro Speed in my S13
-Bride Brix/Ergo in my S13

and now my Zeta III... which is the greatest by far. I used to not like Brides because they were so expensive, so I tried everything else. When I sat in a Brix I loved it. When I upgraded to my Zeta, I loved it even more. Best seat ever...

For the rail, pick up a "whack ass bride" MO type.

[Meister_S14]

1. S14, no sunroof
2. Driver - Zeta III, Passenger - Brix II
3. Zeta III $600, Brix II $700
4. Driver - Bucket, Passenger - Reclinable
5. Driver - fg, Passenger - mo
6. No bracket mods required
7. 5'10, 160lb
8. Headroom ok? 5" so yeah
9. Seat fitment - PERFECT as long as I don't gain any more weight
10. Pic:

[ALTRNTV]

1. s13 coupe w/ sunroof
2. Chargespeed shark seat, FRP
3. $300-$350
4. full bucket
5. Bride FG rail
6. no modifications
7. 5'7" 140lbs
8. I fit nicely in it, with a LITTLE room to spare, tons of headroom
9. I LOVE this seat.

[Nan Desu Ka?!]

where are you connecting your shoulder harness' to? floor or harness bar?