Maximum TIRE(Rubber) fitment thread - Page 99 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Rambo slice · 08-20-2013, 12:24 PM

[/QUOTE]

The stance on this is nice!

WhiteS12+1 · 08-20-2013, 01:48 PM

Alright guys trying to address my traction issues now that my car is tuned and am looking into drag radials for better traction. Nothing outrageous just 350whp on a DD dyno with a 2871r setup.

Anyhow my current set up is 17x9 +22 front with 215/45/17 falken rt615 and 17x10+22 with 235/40/17 faken rt615 (I know, I know). I bought them years ago, without really knowing what I was getting.

I like the MT E/T streets, but don't know if 275/40/17 will fit on the back due to the offset of my rims? If they would I would move the 235's up front? Does anybody have any experience with fitting the 275 on a similar spec'd wheel?

Also I am open to any other suggestions/recommendations. I really want to to try and use the rims I have currently. The car is not a my daily, so I am not to concrned with wear. I thought about buying a spare set of rims to mount the drag radials on, but am also concerned with traction on the street.

I also thought about the Nittos in 245/45/17, but don't know if they would be ideal for traction on a 17x10. Any input or advice would be greatly appreciated.

silviaks2nr · 08-20-2013, 04:17 PM

If you really want traction get a pair of 15s, good rubber, and soft springs.

BraveFart · 08-21-2013, 08:01 PM

Quote:

Originally Posted by bnf

17x9 +12 All round
255/40/17 Nitto NT-01 All round

Looks awesome sauce! What is the car used for? what are the alignment specs?

bnf · 08-22-2013, 04:44 PM

Quote:

Originally Posted by BraveFart

Looks awesome sauce! What is the car used for? what are the alignment specs?

Thanks mate.
The cars used for just time attack here.

Im on -1.5 camber rear and -3.5 front
Caster is about 8 degrees

Does anyone know what the max tyre size i'd be able to run with +50mm rear over fenders?
I'll be running a 18x10.5 +15 rim

***S14DB*** · 08-22-2013, 06:00 PM

Quote:

Originally Posted by bnf

Thanks mate.
The cars used for just time attack here.

Im on -1.5 camber rear and -3.5 front
Caster is about 8 degrees

Does anyone know what the max tyre size i'd be able to run with +50mm rear over fenders?
I'll be running a 18x10.5 +15 rim

315 or 305 would probably be ideal.

BraveFart · 08-22-2013, 06:05 PM

Quote:

Originally Posted by S14DB

315 or 305 would probably be ideal.

I agree^ You could do some calculations for yourself

You could use this to start out with to kind of see where you're at Online Wheel & Tyre Fitment calculator. Offset, Tyre stretch and Rolling Radius calculator

But a 305 should fit easily

bnf · 08-22-2013, 06:31 PM

That was the exact answer I was looking for!

What would u guys recommend for fronts?

Ill be running 17x9.5 +12 with 40mm overs

I love my square setup, but doubt 305's will go on the fronts

Quote:

Originally Posted by BraveFart

I agree^ You could do some calculations for yourself

You could use this to start out with to kind of see where you're at Online Wheel & Tyre Fitment calculator. Offset, Tyre stretch and Rolling Radius calculator

But a 305 should fit easily

Broadfield · 08-22-2013, 06:33 PM

Quote:

Originally Posted by bnf

That was the exact answer I was looking for!

What would u guys recommend for fronts?

Ill be running 17x9.5 +12 with 40mm overs

I love my square setup, but doubt 305's will go on the fronts

I would say 265's

niscur29 · 08-22-2013, 06:38 PM

I running 18x9 +18 up front with +20mm fenders and with a 255/35 its really close to my stance coils but doesnt rub. So a 265 on a 9.5 should clear about the same depending on tire choice.

BraveFart · 08-27-2013, 03:49 PM

I'm getting new wheels and tires very soon for my ls1 s14 stock body. I was thinking Enkei rpf1's 17x9+22 with hankook ventus rs-3 255/40 all around. I'm pretty sure I want to go with this square setup. Car will be used for street, autocross, and prob some other random shit. I just need conformation that the fronts will fit and not rub on the coilovers. Im quite sure it won't but would love some confirmation.

Any suggestions are welcome as well!

e1_griego · 08-27-2013, 04:07 PM

The fronts will fit, the rears are gonna take some fender love to clear.

jr_ss · 08-27-2013, 05:06 PM

They should clear both front and rear without much massaging in the rear. Perhaps a roll and some cambering in will work just fine. The fronts "should" clear if you have slotted top knuckle holes. I'm unsure how much clearance you will have if you don't, but it will be minimal.

I have 10" wheels in the rear with 285's and +38mm offset, I rolled my rears for the needed clearance. You'll stick out 3mm more with the 9's at +22mm.

BraveFart · 08-27-2013, 05:29 PM

Quote:

Originally Posted by jr_ss

They should clear both front and rear without much massaging in the rear. Perhaps a roll and some cambering in will work just fine. The fronts "should" clear if you have slotted top knuckle holes. I'm unsure how much clearance you will have if you don't, but it will be minimal.

I have 10" wheels in the rear with 285's and +38mm offset, I rolled my rears for the needed clearance. You'll stick out 3mm more with the 9's at +22mm.

I don't have slotted top knuckle holes. I know the distance from the tire to coilover will be very close. But I'm crossing my fingers that it will work lol. what do you have on the front?

also, I plan on running between 1 and 1.50 degrees of camber in the rear. Your tires are a lot wider on the rear so maybe all I'll only have to roll the fenders?

jr_ss · 08-27-2013, 05:59 PM

I have 9's up front with a +23 offset. However, my KW's have slotted upper knuckle holes, so I can get more clearance.

BraveFart · 08-27-2013, 11:59 PM

Okay thanks for the info! I guess I'll just have to do it and find out. Worst case scenario I'll have to get a small spacer up front but that's not a big deal. Although I would like for them to just fit with no spacer.

mad-ass · 08-28-2013, 12:26 AM

anyone have any experience with RE050A's?

I let my friend barrow my rear wheels/tires for Mazfest this last weekend, he said it started to get slippery on him.(18x10+38 275/35/18) when it got too hot, the tire mfg. date is 4511[still good tires] and wondering if that's just normal RE050A thing or not.

Thanks.

itsguyguy · 08-28-2013, 05:18 PM

Quote:

Originally Posted by mad-ass

anyone have any experience with RE050A's?

I let my friend barrow my rear wheels/tires for Mazfest this last weekend, he said it started to get slippery on him.(18x10+38 275/35/18) when it got too hot, the tire mfg. date is 4511[still good tires] and wondering if that's just normal RE050A thing or not.

Thanks.

IMHO I hate anything that comes from Bridgestone, especially the RE050A Potenzas. Sure, the rubber may last a few years and may be drivable all season, but for high speed grip, or grip in general, this tire is complete shit.

The feel of the tire is also shit when comparing to other competing brands (Continental, Michelin, Nitto) with a heavier price tag.

The tires are noisy.
Way too noisy after 15K miles, at least they were for me.

I'm assuming you have the run flats, which I previously had on my S13 coupe.

Hated them.

With a passion.
So badly.

Michelin Pilot Spot 2 or 3 are pretty damn good, which I approve over almost anything besides Nitto.

seagrasser · 08-28-2013, 06:16 PM

^ ditto to what this guy said.

Hated them after 5K miles, but were too expensive to replace until they were worn.

mad-ass · 08-29-2013, 12:04 AM

Glad I'm not the only one with such grip problem.

I will say though that they are fairly quiet, but can't really tell in a 240 anyways. LOL

Black R · 08-31-2013, 06:45 AM

Anybody finding wiiide tire deals lately?

I'm looking for 295's or wider. I'll even take 335's.

CaptainVlad · 08-31-2013, 07:19 AM

I have a 265/35 on an 18x10 +18 with a 30mm overfender, and about -2.5 of camber is the least I could do, without having the tire right up against the overfender. (wanted -1.5)

Just add the 20mm difference in our overfenders sizes, and that should help you out.

ShakotanGazelle · 09-04-2013, 03:24 PM

Here's my Z!

Sitting on lowering springs for now, BC coils should be ordered soon

Setup out back is 18x10+15 BSA 215s with Goodyear 275/45s on slight rolled fenders. Fitment looks pretty good for stock body IMO

Ruben240 · 09-05-2013, 12:45 PM

s14.
Can I fit 18x10.5 +22 with 285/35 in rear and 18x9.5 +20 with 255/40 in front?
Got BC coils and 35mm overfenders all around. If I can't can you please tell me offsets to fit? Ty

BraveFart · 09-11-2013, 09:05 PM

Quote:

Originally Posted by Ruben240

s14.
Can I fit 18x10.5 +22 with 285/35 in rear and 18x9.5 +20 with 255/40 in front?
Got BC coils and 35mm overfenders all around. If I can't can you please tell me offsets to fit? Ty

You might need a spacer in the front, but depends on the coilovers.

mad-ass · 09-11-2013, 10:31 PM

well, plug these numbers into offset calculator.
my rear wheels are 18x10+38 with 275/35/18, tucking about 3/8th of tire, fender is pulled 3/4th inch, 0 camber. Just off my head, you shouldn't have any problem fitting that with 35mm over fenders. Front's you'll need about 5mm spacer to clear the coilovers, because my 9.5+15's are about as dangerous as it gets. LOL and step down on the side wall there, because the 255/40's are going to be super tall.

jamg · 09-12-2013, 11:32 PM

quick question

17x9

+25 offset

will a 245/40 or 45 tire fit up front?

and that's the car being as stanced as possible.

i had a 17x9.75 +25 with a 245/40 tire, and i couldn't get it to fit. even with a 10mm spacer, it hit the coils.

e1_griego · 09-12-2013, 11:38 PM

Depends on the coil.

That's what I run in the front of my hatch. It fits fine for me.

WristWork · 09-12-2013, 11:45 PM

spooled240 · 09-13-2013, 05:59 PM

it seems somewhat difficult to run a 255/35 on a low offset 18x9.5 in the front of a s14, but I see many people run 17x10's and 17x9.5 with 255/40's in the front without an issue.

According to this calculator a 255/40r17 has the same width and overall height as a 255/35r18.
Tire Dimensions Made Simple - Discount Tire

I'm going to run a 18x9.5 +15 up front and a 18x9.5 +22 in the rear with 255/35r18 all around but I think I may have to use a 235/40 in the front for fender clearance..

08-27-2013, 05:06 PM	#2953
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,412 Trader Rating: (35) Feedback Score: 35 reviews	They should clear both front and rear without much massaging in the rear. Perhaps a roll and some cambering in will work just fine. The fronts "should" clear if you have slotted top knuckle holes. I'm unsure how much clearance you will have if you don't, but it will be minimal. I have 10" wheels in the rear with 285's and +38mm offset, I rolled my rears for the needed clearance. You'll stick out 3mm more with the 9's at +22mm. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

08-27-2013, 05:59 PM	#2955
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,412 Trader Rating: (35) Feedback Score: 35 reviews	I have 9's up front with a +23 offset. However, my KW's have slotted upper knuckle holes, so I can get more clearance. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

08-28-2013, 12:26 AM	#2957
mad-ass Nissanaholic! Join Date: Jun 2007 Location: Nor Cal Posts: 2,273 Trader Rating: (14) Feedback Score: 14 reviews	anyone have any experience with RE050A's? I let my friend barrow my rear wheels/tires for Mazfest this last weekend, he said it started to get slippery on him.(18x10+38 275/35/18) when it got too hot, the tire mfg. date is 4511[still good tires] and wondering if that's just normal RE050A thing or not. Thanks. __________________

08-28-2013, 06:16 PM	#2959
seagrasser Zilvia Member Join Date: Nov 2011 Location: Lynnwood WA Age: 49 Posts: 256 Trader Rating: (2) Feedback Score: 2 reviews	^ ditto to what this guy said. Hated them after 5K miles, but were too expensive to replace until they were worn. __________________ S14 RB25

08-29-2013, 12:04 AM	#2960
mad-ass Nissanaholic! Join Date: Jun 2007 Location: Nor Cal Posts: 2,273 Trader Rating: (14) Feedback Score: 14 reviews	Glad I'm not the only one with such grip problem. I will say though that they are fairly quiet, but can't really tell in a 240 anyways. LOL __________________

08-20-2013, 12:24 PM	#2941
Rambo slice Zilvia Addict Join Date: Jul 2011 Location: south FL Posts: 610 Trader Rating: (7) Feedback Score: 7 reviews	[/QUOTE] The stance on this is nice!

08-20-2013, 01:48 PM	#2942
WhiteS12+1 Leaky Injector Join Date: Dec 2002 Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	Alright guys trying to address my traction issues now that my car is tuned and am looking into drag radials for better traction. Nothing outrageous just 350whp on a DD dyno with a 2871r setup. Anyhow my current set up is 17x9 +22 front with 215/45/17 falken rt615 and 17x10+22 with 235/40/17 faken rt615 (I know, I know). I bought them years ago, without really knowing what I was getting. I like the MT E/T streets, but don't know if 275/40/17 will fit on the back due to the offset of my rims? If they would I would move the 235's up front? Does anybody have any experience with fitting the 275 on a similar spec'd wheel? Also I am open to any other suggestions/recommendations. I really want to to try and use the rims I have currently. The car is not a my daily, so I am not to concrned with wear. I thought about buying a spare set of rims to mount the drag radials on, but am also concerned with traction on the street. I also thought about the Nittos in 245/45/17, but don't know if they would be ideal for traction on a 17x10. Any input or advice would be greatly appreciated.

08-20-2013, 04:17 PM	#2943
silviaks2nr Nissanaholic! Join Date: Nov 2004 Location: SC Posts: 2,192 Trader Rating: (10) Feedback Score: 10 reviews	If you really want traction get a pair of 15s, good rubber, and soft springs.

08-22-2013, 06:38 PM	#2950
niscur29 Zilvia Junkie Join Date: Mar 2010 Location: Back IN FL, bring nice cars to the fail state! Age: 43 Posts: 481 Trader Rating: (14) Feedback Score: 14 reviews	I running 18x9 +18 up front with +20mm fenders and with a 255/35 its really close to my stance coils but doesnt rub. So a 265 on a 9.5 should clear about the same depending on tire choice.

08-27-2013, 03:49 PM	#2951
BraveFart Join Date: Jul 2012 Location: errwhere Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	I'm getting new wheels and tires very soon for my ls1 s14 stock body. I was thinking Enkei rpf1's 17x9+22 with hankook ventus rs-3 255/40 all around. I'm pretty sure I want to go with this square setup. Car will be used for street, autocross, and prob some other random shit. I just need conformation that the fronts will fit and not rub on the coilovers. Im quite sure it won't but would love some confirmation. Any suggestions are welcome as well!

08-27-2013, 04:07 PM	#2952
e1_griego Post Whore! Join Date: Sep 2004 Location: Independence, Ore. Age: 39 Posts: 2,711 Trader Rating: (24) Feedback Score: 24 reviews	The fronts will fit, the rears are gonna take some fender love to clear.

08-27-2013, 11:59 PM	#2956
BraveFart Join Date: Jul 2012 Location: errwhere Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	Okay thanks for the info! I guess I'll just have to do it and find out. Worst case scenario I'll have to get a small spacer up front but that's not a big deal. Although I would like for them to just fit with no spacer.

08-31-2013, 06:45 AM	#2961
Black R Zilvia Addict Join Date: May 2009 Location: ATL Posts: 642 Trader Rating: (0) Feedback Score: 0 reviews	Anybody finding wiiide tire deals lately? I'm looking for 295's or wider. I'll even take 335's. __________________ S13 XE coupe: Aristo GTE, R154, GT37, Defsport Wilwood kit, KTS coilovers

08-31-2013, 07:19 AM	#2962
CaptainVlad Zilvia Junkie Join Date: Oct 2007 Location: Chicago, Illinois Age: 33 Posts: 329 Trader Rating: (4) Feedback Score: 4 reviews	I have a 265/35 on an 18x10 +18 with a 30mm overfender, and about -2.5 of camber is the least I could do, without having the tire right up against the overfender. (wanted -1.5) Just add the 20mm difference in our overfenders sizes, and that should help you out.

09-04-2013, 03:24 PM	#2963
ShakotanGazelle Zilvia Junkie Join Date: Apr 2011 Location: DFW, TX Posts: 514 Trader Rating: (2) Feedback Score: 2 reviews	Here's my Z! Sitting on lowering springs for now, BC coils should be ordered soon Setup out back is 18x10+15 BSA 215s with Goodyear 275/45s on slight rolled fenders. Fitment looks pretty good for stock body IMO

09-05-2013, 12:45 PM	#2964
Ruben240 Join Date: Sep 2013 Location: Luxembourg Age: 31 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	s14. Can I fit 18x10.5 +22 with 285/35 in rear and 18x9.5 +20 with 255/40 in front? Got BC coils and 35mm overfenders all around. If I can't can you please tell me offsets to fit? Ty

09-11-2013, 10:31 PM	#2966
mad-ass Nissanaholic! Join Date: Jun 2007 Location: Nor Cal Posts: 2,273 Trader Rating: (14) Feedback Score: 14 reviews	well, plug these numbers into offset calculator. my rear wheels are 18x10+38 with 275/35/18, tucking about 3/8th of tire, fender is pulled 3/4th inch, 0 camber. Just off my head, you shouldn't have any problem fitting that with 35mm over fenders. Front's you'll need about 5mm spacer to clear the coilovers, because my 9.5+15's are about as dangerous as it gets. LOL and step down on the side wall there, because the 255/40's are going to be super tall. __________________

09-12-2013, 11:32 PM	#2967
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7) Feedback Score: 7 reviews	quick question 17x9 +25 offset will a 245/40 or 45 tire fit up front? and that's the car being as stanced as possible. i had a 17x9.75 +25 with a 245/40 tire, and i couldn't get it to fit. even with a 10mm spacer, it hit the coils.

09-12-2013, 11:38 PM	#2968
e1_griego Post Whore! Join Date: Sep 2004 Location: Independence, Ore. Age: 39 Posts: 2,711 Trader Rating: (24) Feedback Score: 24 reviews	Depends on the coil. That's what I run in the front of my hatch. It fits fine for me.

09-12-2013, 11:45 PM	#2969
WristWork Zilvia Addict Join Date: Jul 2012 Location: N/A Posts: 742 Trader Rating: (12) Feedback Score: 12 reviews

09-13-2013, 05:59 PM	#2970
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,203 Trader Rating: (27) Feedback Score: 27 reviews	it seems somewhat difficult to run a 255/35 on a low offset 18x9.5 in the front of a s14, but I see many people run 17x10's and 17x9.5 with 255/40's in the front without an issue. According to this calculator a 255/40r17 has the same width and overall height as a 255/35r18. Tire Dimensions Made Simple - Discount Tire I'm going to run a 18x9.5 +15 up front and a 18x9.5 +22 in the rear with 255/35r18 all around but I think I may have to use a 235/40 in the front for fender clearance..