S-Chassis Dual Caliper Kit!!! NEW!

[ch1873857]

had several fitment issues. none with the hub rings though. i had to take a chunk out of my knuckle just to get the caliper to fit. and theres minimal bolt clearence for the bottom bolt of the caliper on the back side. a little frustrating but in the end it came out awesome

[maverickmotorsports]

Originally Posted by ch1873857

had several fitment issues. none with the hub rings though. i had to take a chunk out of my knuckle just to get the caliper to fit. and theres minimal bolt clearence for the bottom bolt of the caliper on the back side. a little frustrating but in the end it came out awesome

What uprights are you using? With steel uprights you should only have to cut off the OEM brake mounts.

[RHDphil]

I also had to shave a lil off the uprights to make mine fit, caliper was hitting, not a big deal tho, lil grinding

[ch1873857]

Yeah same here. Definitely didnt fit right away lol.

[new47416]

Do you have any in stock? i need one set!

[Izzyidk]

Anyone mind sharing what lines you used and where you got them? Thanks!

[ch1873857]

you can make your own off parts you can get off of summit racing. for less than 50. im working on a kit right now. that goes from my ASD ebrake to the calipers. if anyones interested in a kit let me know. mine worked fine. all prefabbed hoses. stainless steel braided all the way back.

[turbo please]

Anyone ever figure out if this bracket is compatible with the Sti calipers?

[ch1873857]

I highly doubt it due to clearence issues already

[Biggamehit]

Seen this a while ago.. now there is a need for some of these for my new D1SL car. PM sent.

[Luvs2slide]

Hand brake kit out yet?

[Biggamehit]

I didn't see it here so thought I would share my liine setup for those who need color pictures lol. You can go about this many ways, all parts in the picture came up to about 135ish dollars shipped.

As you can see standard AN/NPT fitting and line. I went with a upgraded wilwood master cly on my ISIS hand brake but decided to go with this all in one wilwood master cly



-MSpaint lol

[ch1873857]

hey biggamehit.. i have the same setup... some of your fitting sizes are off though. z32 calipers and all factory IF fittings are M10x1.0 IF and im 100% positive about that. also my ASD handbrake uses that same master cylinder ( had another fitting into the port shown in picture) but ASD uses a 3/8 -24 IF fitting. Also instead of converting everything into 1/8npt at the tee. you can just get a -3AN tee. for $3.95 my entire brake line kit costs about $78 shipped.

if anyone is wondering. here is the list of parts i used. all premade lines.

3/8 -24 IF to -3AN brake adapter fitting for wilwood master
48" -3AN premade stainless brake hose 90* fitting on MC side straight on other
-3AN TEE fitting -3 on all three ports
(2) 20" -3AN premade brake hose straight both ends (for cost)
(2) M10x1.0 IF to -3AN brake adapter fitting for hoses to 300zx brake calipers.

thats it. price on that is about $75-80 cant remember..

[Biggamehit]

Yea I have coverting fittings already bro. the price is higher becuase im in Japan and they add APO prices.


ps

I was stationed at Andrews from 06 to 08

[ch1873857]

ahh thats retarded. i was quite happy with the fact that i could buy everything i need ready to go from one place as if they sold the kit haha. for a good price too. a little bit of imagination, a tape measure, and some thread pitch gauges really helped me out.

i would do anything to get out of andrews. i was deployed with a couple guys from misawa last year.. smh. im jealous as shit. im FROM MD. been here for years and i cant get out of here.

[Luvs2slide]

So Donnie you running the dual calipers right now? Big difference?

Also you guys are referring to " IF " What does that mean?

[Biggamehit]

I just ordered the kit. The biggest reason for this is if you drift a lot you will no doubt stretch cables. E-brake as you know from living here in Japan is vital and not a noob tool lol. Basically with traditional hydro setups you would just "splice" into the existing line via the master cylinder. What this does is create interference and prevents you from braking while e-braking etc. The biggest complaint also is a soggy brake pedal. With my R33 I had the OE Shoe setup and pretty much had to adjust every two events in order to firmly lock my rear wheels. This will be going on my Sil80 in preps for D1 Divisional/SL this year.

[Biggamehit]

[ch1873857]

looks good man! pimp ass rotors haha

[Biggamehit]

yea 78 bucks a pop on autozone!!


Ran the lines and bled the hydro. Will make a bracket to mount the junction box tomorrow. very impressed with how firm the handle is and how little effort it takes to lock em!

[CSXTacy]

i recently received my dual caliper brake kit i have it all installed except for the brake lines which are on order kit is amazing!!!! did have to shave quite a bit of metal around the lower strut mount (see pics) to make the bolts that came with the kit work but it was well worth it the mustang brake rotors are amazing!

[Armazecreta]

I just order my Yesterday. Can't wait to install these puppies!!

[4slydn]

Hey mate, it's ryan have you sent the brackets yet my address is 176 hibberts lane Freeman's reach nsw Australia 2756 have been trying to contact you for a week now......

[Lil_D]

I've been waiting for my bracket to. I need them to finish my car

[onemotion]

Originally Posted by 4slydn

Hey mate, it's ryan have you sent the brackets yet my address is 176 hibberts lane Freeman's reach nsw Australia 2756 have been trying to contact you for a week now......

Same here. I bought these on 4/12/12 and I havent received mine yet. I been leaving him emails pms and voicemail. And no answer. Anybody know where this guy is?

[My$800S14]

Hey man, a 16" wheel won't clear this will it?

Sent from my Droid using Tapatalk 2

[4slydn]

said he would send tracking numbers 4 days ago, still nothing sent trough. ordered my kit 3 weeks ago........

[EliteJDM]

hey, My$800S14, clear you PM's, your inbox is full

I do have a few more sets of calipers!

[maverickmotorsports]

Sorry for the delay guys.

My fastener supplier ran out of the bolts I use and he was backordered until last week. The new hardware is here and all shipments will go out tonight or tomorrow.

Thanks for your patience.

[JorgeZ33]

any news on the 350z kit?