King of doing it wrong. LOOK AT MY SPACERS!

[mhubeny180sx]

l2read to your question, and to your solution.

[tetsuon18]

mother of fucking fucks... And just when i though I've seen retarded. So you think you can justify expensive ass spacers, (which you could have spent that money on engine upgrades, MORE suspesion, etc) with posting a picture of a REAL tuner? Guess what... he might be slightly lower, but I guarran fucken tee you that he has a ton of supporting mods to compensate with the modifications made to the roll center. Get rid of your stupid fucking spacers, your wheels are wide enough and look great. Spend your money on more functional stuff instead of trying to make your car what it really isn't. Don't cut into the body because eventually you'll just ruin a perfectly nice car all because you're a stubborn retard.

[harris180]

wait your wheels are 10.5 +25 rears and they hit the coilover? What brand are your coilovers?

[Sileighty_85]

Bro... There are only 4 ways to fix your problem (5 if you count setting your car ablaze until the tires melt off, Which sounds pretty good right now). They are all easy to figure out.

If you cannot figure out how to fix this easy solution then I highly suggest you stop what you are doing before you go past the PONR and have to resort to #5.

[mhubeny180sx]

Originally Posted by Sileighty_85

Bro... There are only 4 ways to fix your problem (5 if you count setting your car ablaze until the tires melt off, Which sounds pretty good right now). They are all easy to figure out.

If you cannot figure out how to fix this easy solution then I highly suggest you stop what you are doing before you go past the PONR and have to resort to #5.

why would i set my mint car on fire? so it can look like a combination of your wifes' face and your cars? multi colored unfinished panels and all droopy/saggy? nthx.

[Sileighty_85]

Originally Posted by mhubeny180sx

why would i set my mint car on fire? so it can look like a combination of your wifes' face and your cars? multi colored unfinished panels and all droopy/saggy? nthx.

hahaha ok bro, Now who's hating?


My 5 built cars out preform your soon to be dumpster spec S13 in every way.


Im more of a function over form kinda guy. Paint and body work is the last thing I worry about on all my cars. Not to mention none of my cars are anywhere close to being finished.


I leave all the easy stuff for last.


Since you can't understand the concept.


Rubber melts/burns when exposed to extreme temps. so when your tires melt and burn off the wheels then you don't have a problem with the tires hitting the fenders.

[mhubeny180sx]

Originally Posted by Sileighty_85

My 5 built cars out preform your soon to be dumpster spec S13 in every way.


Im more of a function over form kinda guy. Paint and body work is the last thing I worry about on all my cars. Not to mention none of my cars are anywhere close to being finished.


I leave all the easy stuff for last.

lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.

[Sileighty_85]

Originally Posted by mhubeny180sx

lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.

HAHAHA Really? You are joking right? None of my cars are properly built?


Please enlighten me on how none of my cars are properly built? Aside from My AE86 which the engine was in an unknown state and I was on a time crunch to get running before I had to leave the US.


Maybe you should take a closer look at my build threads and notice the quality of parts that are installed in them.




My GT-R. Yeah so haggard

[5280VertDET]

Originally Posted by mhubeny180sx

lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.

Dude, what is your deal? For real? Why such a chip on your shoulder?

Serious. Calm the fuck down and stop trying "win" every argument. The bottom line is that you simply can not run those wheels, those spacers without A LOT of body work.

Also, you keep mentioning safety for the justification for your spacers. The bottom line is that spacers aren't safe. If you want safe, buy wheels that fit with out the use of spacers. (I understand that you love these discontinued wheels)

Spacers put extra wear and tear on your drive line components, messes with the geometry and adds an additional failure point per wheel. (I don't care if they are made from titanium)

Please stop. This isn't a dick measuring contest, you are a keyboard cowboy and responding to the other trolls. If it is your car, and this is how you want it to look, you honestly should not be asking for advice here. You know what the answer is (also it's been post by me and others). You will need to pay someone to do the work for you and they will tell you that it's not possible or they will charge you a ton to do it (which clearly isn't a concern for you).

Honestly, do you think the hatch you referenced earlier made a post like this? No, he wanted to do it had the skills, or knew someone who does, to make it happen.

You can't ask a dumb question and not expect snarky responses.

[KiLLeR2001]

Holy fuck those spacers honestly look like they are 65mm thick, LMAO!

Hope you have a case of wheel bearings on hand.

P.S., nice spacer bro...

[ehhhregartless]

I knew something like that would show up lol

[turbo2nr]

So who is this RWB fella?

Does he use bigger spacers then this guy?

Will OP get his wheel and fenders to fit?




0_o Find out on the next episode of Zilvia....

[1on1]

Can you provide a photo of your spacers? Also, do you have any suspension parts installed?

[1on1]

Originally Posted by 1on1

What size are your custom spacers?

Originally Posted by 1on1

Can you provide a photo of your spacers? Also, do you have any suspension parts installed?

msglength......

[mhubeny180sx]

lol all these ppl hating on me got the 900k mileage cars with gt wings to keep downforce on their garage dormant (due to not running) 240. My vehicle is not even 25% done and its miles past (from what ive seen) any of these hater's cars.

[Hiighboost2]

Digging that hole pretty deep I see.
Why don't you go ahead and figure it out on your own since you're so much more intelligent than the rest of us combined.
As a matter of fact.. why did you even start this thread seeing that your obviously some type of genius when it comes to car setups.

[mhubeny180sx]

this is the KEY problem im dealing with when it comes to cutting fenders, which will not solve anything because the tires are hitting on the mounting points of the bumper (which is just mocked up)

with wheel turned showing contact point


with wheel turned away to show the point where the bumper attaches to the fender


edit:
I was thinking of adjusting the caster, but i only have about 1/4 inch - 1/2 inch of space back there when the wheels are turned so i don't think it would get me very far

[KiLLeR2001]

Originally Posted by mhubeny180sx

this is the KEY problem im dealing with when it comes to cutting fenders, which will not solve anything because the tires are hitting on the mounting points of the bumper (which is just mocked up)

with wheel turned showing contact point
[IMG]

with wheel turned away to show the point where the bumper attaches to the fender
[IMG]

edit:
I was thinking of adjusting the caster, but i only have about 1/4 inch - 1/2 inch of space back there when the wheels are turned so i don't think it would get me very far

Yep, I've seen that before... You have an extreme amount of full frontal frame damage (FFFD). Did you verify that your numbers were matching before purchasing that car? Looks like you got got m8. Time for a new car or get someone with a truck and some chains to pull on your front end as hard as possible until the space you need is achieved.

[mhubeny180sx]

Originally Posted by KiLLeR2001

Yep, I've seen that before... You have an extreme amount of full frontal frame damage (FFFD). Did you verify that your numbers were matching before purchasing that car? Looks like you got got m8. Time for a new car or get someone with a truck and some chains to pull on your front end as hard as possible until the space you need is achieved.

no, there is no damage frontal dmg. the purple paint is actually original as well.

If you wanna talk frontal dmg, check 2 things
1) Your frontal lobe
2) That s15 front end on a stock looking hatch (lol wtf were u thinking maybe when i was 13 i thought that kinda conversion was cool). Thats a write off bruh.

[KiLLeR2001]

Originally Posted by mhubeny180sx

no, there is no damage frontal dmg. the purple paint is actually original as well.

If you wanna talk frontal dmg, check 2 things
1) Your frontal lobe
2) That s15 front end on a stock looking hatch (lol wtf were u thinking maybe when i was 13 i thought that kinda conversion was cool). Thats a write off bruh.

I see you reading my threads, you must be a bored little troll, got your feelings hurt because everyone is pointing and laughing at your ridiculous spacers. Again I ask, do you have a box full of wheel bearings on the ready?

Also, real ballers buy real 1998 Sileighty's. Only 500 were made so better start searching now.

[mhubeny180sx]

Originally Posted by KiLLeR2001

I see you reading my threads, you must be a bored little troll, got your feelings hurt because everyone is pointing and laughing at your ridiculous spacers. Again I ask, do you have a box full of wheel bearings on the ready?

Also, real ballers buy real 1998 Sileighty's. Only 500 were made so better start searching now.

When did I say i was a baller lol, its this community that titled me a baller for buying $800 spacers, dont hate the player hate the game. Whats a real sil80, kidsheart made them lol, and by "made" they took a 180sx and slapped fenders, lights, a hood and bumper from silvia, and put sileighty on the rear tail light garnish. you're just mad I got the true jdm, while ur sprayin ether to get ur auto 215sx started lol

edit: why are you watching what i look at lol, dam u creepy son.

[turbo2nr]

^ pls dioe.

ktnxbye

<3

[OBEEWON]

This cat is making some of yall look real dumb.

[Sileighty_85]

Originally Posted by OBEEWON

This cat is making some of yall look real dumb.

Meh... Its 1am, I'm at work and extremely bored.. This is kinda entertaining to me. although not fun anymore when he doesn't answer my questions.

[KoukiMonsta]

step one. sell your car
step two. buy a kia

[OBEEWON]

Just to stoke the fire, have you thought about dropping down two sidewall series?

Also, very serious question. Have your spacers been heat cycled and shot peened?

[mhubeny180sx]

Originally Posted by OBEEWON

Just to stoke the fire, have you thought about dropping down two sidewall series?

Also, very serious question. Have your spacers been heat cycled and shot peened?

I have, yes but...


nthx

To the serious question, I can't say I have an answer for you, so there is no safe assumption to be made yaknowutimean.

[OBEEWON]

Haha I like you.

[KoukiMonsta]

where did you get dem rimZ?

[blueshark123]

OMFG Just take wheel Spacers the fuck off. Why did you spend so much for spacers is beyond me. Not even if they were conversion spacers would they have cost that much. Are they made of titanium or some shit. You paid 800 for something you can get for 140 and yet you call other people stupid and poor, but you own a shitty 240 still.