Maximum TIRE(Rubber) fitment thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hellion240sx · 09-10-2011, 03:48 PM

okay so plugged in the same numbers and this is what i got from willitfit:
old/new
Diameter 615mm 606mm
Circumference 1932.1mm 1903.8mm
Poke 42.6mm 101.6mm
Inset 122.6mm 101.6mm
Speedo error 0% 1.49%
Reading at 30mph 30mph 30.45mph
Reading at 60mph 60mph 60.89mph
Ride height gain 0mm -4.5mm
Arch gap loss 0mm -4.5mm

So how would I go about seeing if I will hit lock to lock and not rub?

acutually it gives to reading from the speedo. well from the two diff sites....

09-10-2011, 03:48 PM	#11
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 42 Posts: 1,514 Trader Rating: (0) Feedback Score: 0 reviews	okay so plugged in the same numbers and this is what i got from willitfit: old/new Diameter 615mm 606mm Circumference 1932.1mm 1903.8mm Poke 42.6mm 101.6mm Inset 122.6mm 101.6mm Speedo error 0% 1.49% Reading at 30mph 30mph 30.45mph Reading at 60mph 60mph 60.89mph Ride height gain 0mm -4.5mm Arch gap loss 0mm -4.5mm So how would I go about seeing if I will hit lock to lock and not rub? acutually it gives to reading from the speedo. well from the two diff sites.... __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict