Godspeed Project S13 S14 Steering Angle Adaptor - Page 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TwoFrotty · 12-05-2012, 05:36 AM

What's the chances you still have some of these?

nidr0x · 01-04-2013, 11:17 PM

------------

EvoVIII808 · 01-05-2013, 06:39 AM

Quote:

Originally Posted by nidr0x

Hi,

Its correct to install the adaptor in passenger side with the included gold spacer and in the driver side install a gold 7mm spacer? Its ok? Thanks!

yes. you may run into some issues with Toe corrections. I ran out of threads on my stock S13 tie rods. so i ran the big spacer without the small 7mm.

nidr0x · 01-07-2013, 07:34 PM

Thanks, in this case i install only the steering angle adaptor.

nidr0x · 01-11-2013, 11:07 AM

I tried to install with the oem tie rods and track rods and its impossible to centre the two wheels in my case.

I tried to remove the spacer from the adaptor and same result. If i install aftermarket track rods and tie rods the problem continues? Thanks

EvoVIII808 · 01-11-2013, 07:53 PM

Had no problems with my stock s13 rods. I just had to take off the 7mm spacer. Im not sure it will work correctly with longer rods, unless you have more threads for adjustment. Try recentering you rack again.

240SilviaX · 01-11-2013, 08:25 PM

If your car has too much toe in after the adapter install and have adjusted the inner and outer tie rods to the max,, (bottoming out the inner into the outer) if you have more threads on the inner just cut about 1/2-1" of the threads off the end of the inner tie rod that threads into to the outer and wham more toe out adjust-ability

uaserge · 05-20-2013, 03:50 PM

You still got this???

artica · 06-02-2013, 04:10 PM

I cut off a few mm's of thread from my passenger tie rod and it was the best idea ever!!!
I also used a Tap and Die kit to make the threads go in longer on the tie rod.
Then I backed out the die to make sure the tie rod end still has a good starting thread to work into the outer joint.
full adjustability now.

Fatboy Garage · 10-01-2013, 10:53 AM

This is the cheapest way to get more angle!!! Backwards entry time....

Fatboy Garage · 10-10-2013, 12:20 PM

Thread updated! Going to be uploading a video soon on how to recenter a steering rack!

Fatboy Garage · 10-14-2013, 12:49 PM

Columbus day bump!!!

Fatboy Garage · 10-22-2013, 01:41 PM

steering angle adapters in stock and ready to go!

Fatboy Garage · 11-04-2013, 11:39 AM

Steering Angle Adapters! Cheapest way to get more angle out of your S-Chassis!

Fatboy Garage · 11-22-2013, 04:31 PM

These adapters in stock and always ready to go.

12-05-2012, 05:36 AM	#91
TwoFrotty Join Date: Oct 2012 Location: Tyler Age: 38 Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	What's the chances you still have some of these? __________________ Drifting isn't a Sport... It's a way of Life!

01-04-2013, 11:17 PM	#92
nidr0x Join Date: Apr 2009 Location: N/A Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	------------ Last edited by nidr0x; 04-07-2018 at 01:41 PM..

01-11-2013, 07:53 PM	#96
EvoVIII808 Zilvia Junkie Join Date: Aug 2009 Location: Washington Age: 39 Posts: 588 Trader Rating: (16) Feedback Score: 16 reviews	Had no problems with my stock s13 rods. I just had to take off the 7mm spacer. Im not sure it will work correctly with longer rods, unless you have more threads for adjustment. Try recentering you rack again. __________________ Check Out My S13 Build

10-01-2013, 10:53 AM	#100
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	This is the cheapest way to get more angle!!! Backwards entry time.... __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject

10-10-2013, 12:20 PM	#101
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Thread updated! Going to be uploading a video soon on how to recenter a steering rack! __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject

01-07-2013, 07:34 PM	#94
nidr0x Join Date: Apr 2009 Location: N/A Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Thanks, in this case i install only the steering angle adaptor.

01-11-2013, 11:07 AM	#95
nidr0x Join Date: Apr 2009 Location: N/A Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	I tried to install with the oem tie rods and track rods and its impossible to centre the two wheels in my case. I tried to remove the spacer from the adaptor and same result. If i install aftermarket track rods and tie rods the problem continues? Thanks

01-11-2013, 08:25 PM	#97
240SilviaX Leaky Injector Join Date: May 2012 Location: HB / OC, CA Age: 37 Posts: 120 Trader Rating: (2) Feedback Score: 2 reviews	If your car has too much toe in after the adapter install and have adjusted the inner and outer tie rods to the max,, (bottoming out the inner into the outer) if you have more threads on the inner just cut about 1/2-1" of the threads off the end of the inner tie rod that threads into to the outer and wham more toe out adjust-ability

05-20-2013, 03:50 PM	#98
uaserge Join Date: Aug 2011 Location: Barksdale AFB Age: 36 Posts: 36 Trader Rating: (1) Feedback Score: 1 reviews	You still got this???

06-02-2013, 04:10 PM	#99
artica Join Date: Aug 2011 Location: Concord, NC Age: 40 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	I cut off a few mm's of thread from my passenger tie rod and it was the best idea ever!!! I also used a Tap and Die kit to make the threads go in longer on the tie rod. Then I backed out the die to make sure the tie rod end still has a good starting thread to work into the outer joint. full adjustability now.

10-14-2013, 12:49 PM	#102
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Columbus day bump!!! __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject

10-22-2013, 01:41 PM	#103
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	steering angle adapters in stock and ready to go! __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject

11-04-2013, 11:39 AM	#104
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Steering Angle Adapters! Cheapest way to get more angle out of your S-Chassis! __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject

11-22-2013, 04:31 PM	#105
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 38 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	These adapters in stock and always ready to go. __________________ Godspeed Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 W:godspeedproject.com www.facebook.com/godspeedproject