|
Archive and FAQs Archives and Frequently Asked Questions about the 240SX are in here. |
|
Thread Tools | Display Modes |
|
06-01-2010, 10:46 PM | #1 |
yeah, we tried a 1.25" npt but the threads in the tube would cut the wall too thin. it has to be an oddball thread size to fit while still having enough thread depth to make me feel ok with it's ability to hold. the m48 nut from koni was too shallow, and the m50 would cut too deep. the insert fits well though, needed a bit of aluminum shim to be snug at the bottom. if one were using the off-the-shelf GC sleeve and short spring (basicly build it and set it up as if it were a regular yellow) it would still be a huge leap above a lot of other options.
|
|
Sponsored Links |
06-02-2010, 12:00 AM | #2 | |
Zilvia Addict
Join Date: Jun 2008
Location: Back in the Bay!
Posts: 619
Trader Rating: (11)
Feedback Score: 11 reviews
|
Quote:
|
|
06-02-2010, 12:55 AM | #4 | |
Zilvia Addict
Join Date: Jun 2008
Location: Back in the Bay!
Posts: 619
Trader Rating: (11)
Feedback Score: 11 reviews
|
Quote:
Manonegra, time to cash in man. Make these top-hats and I'll even send some money in advance. |
|
06-02-2010, 08:08 AM | #5 | |
Post Whore!
|
Quote:
Do tell! haha |
|
06-02-2010, 11:22 AM | #6 |
Zilvia Addict
Join Date: Jun 2008
Location: Back in the Bay!
Posts: 619
Trader Rating: (11)
Feedback Score: 11 reviews
|
The MR2 and some other cars (IIRC Toyotas and Volvos) has serviceable OEM struts with a removable gland nut to hold the internals in the strut tube.
While I was searching for a way to simply hold the 8611-1257 inside a strut tube I found that a lot of people are actually doing this. They would cut the threaded portion with the gland nut off the MR2 strut tube, measure and modify their own strut tube to fit the 8611, then weld on the threaded section to hold the Koni insert in place. It sounds a bit convoluted but in the hands of a competent welder I'm sure it will beat the hell out of buying the pipe threading tool money wise. |
Bookmarks |
|
|