rims and tire clearance question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240tuned91 · 08-02-2014, 07:47 PM

I have 18 by 9.5 0 offset the 265/35/18 clear fine in the rear I rolled the pinch weld however I'm worried about the front... the front is 18 by 9.5 0 offset also with a 245/40/18 tire car is lowered on Megan lowering springs and kyb struts. The tire wore the hood cable but not the harness on the driver side thank god. I drove the car lightly however now it's good to go I'm worried at full lock or a big bump my fenders gonna rip off lol can I just put the car on jack stands and Jack under the control arm to make sure? Sorry if I'm rambling I'm not into the Tim aspect to much I just made an impulse by on some rotas. . I will post pix thanks

08-02-2014, 07:47 PM	#1
240tuned91 Zilvia Member Join Date: Jan 2009 Location: nj Age: 33 Posts: 219 Trader Rating: (3) Feedback Score: 3 reviews	rims and tire clearance question I have 18 by 9.5 0 offset the 265/35/18 clear fine in the rear I rolled the pinch weld however I'm worried about the front... the front is 18 by 9.5 0 offset also with a 245/40/18 tire car is lowered on Megan lowering springs and kyb struts. The tire wore the hood cable but not the harness on the driver side thank god. I drove the car lightly however now it's good to go I'm worried at full lock or a big bump my fenders gonna rip off lol can I just put the car on jack stands and Jack under the control arm to make sure? Sorry if I'm rambling I'm not into the Tim aspect to much I just made an impulse by on some rotas. . I will post pix thanks