*NOW IN STOCK* Tomei- Turbine Outlet Pipe, RB20, RB25

[Enjuku Racing]

*NOW IN STOCK* Price: $306.00




___________________________________________

Tomei- Turbine Outlet Pipe, RB20, RB25

Efficient High Flow Design
For Both RB20 & RB25 Engines

With a smooth inner walls, high flow capacity, easy to install flange design for an easy direct bolt on application.
Compatible with the stock turbo and the Tomei ARMS Turbo will contribute with improving the power output. Designed to suit a Φ76.3mm front pipe.


The internal diameter has been enlarged by 120%. This will significantly drop exhaust back pressure

Designed to be a hassle free installation. We have incorporated a dimple in the pipe where the bolt for the flange is located. To allow ease of access to both bolts and nuts to allow a quick, trouble free bolt on application.
__________________________________________

Click here to order ===> http://www.enjukuracing.com/products...rb20-rb25.html

[Ilya]

This turbow elbow is not designed to help clear an RB swap and the lhd steering shaft?

[jduke]

What turbo is on that rb?

[Enjuku Racing]

Originally Posted by Ilya

This turbow elbow is not designed to help clear an RB swap and the lhd steering shaft?

This elbow should not interfere at all with LHD steering shafts according to Tomei.

[Enjuku Racing]

Originally Posted by jduke

What turbo is on that rb?

A Tomei ARMS M8265 bolt on turbo is shown in the picture above. Currently in prototype phase and is not yet available for purchase.

[Ilya]

what down pipes can we use with this piece?

[Enjuku Racing]

Originally Posted by Ilya

what down pipes can we use with this piece?

This elbow is designed to bolt up to a factory skyline with a factory skyline (or aftermarket skyline) down pipe. If you have a RB swapped 240 and you currently have a downpipe in place with a factory turbo outlet pipe, this will bolt up just fine. Otherwise, you will mostly likely have to utilize a custom down pipe or a RB/240 swap specific downpipe with this Tomei Outlet.

[driftkings14]

Can we confirm has anyone had success using this tomei elbow for rb25 in a lhd s14 s13 ..

[driftkings14]

Originally Posted by Enjuku Racing

This elbow is designed to bolt up to a factory skyline with a factory skyline (or aftermarket skyline) down pipe. If you have a RB swapped 240 and you currently have a downpipe in place with a factory turbo outlet pipe, this will bolt up just fine. Otherwise, you will mostly likely have to utilize a custom down pipe or a RB/240 swap specific downpipe with this Tomei Outlet.

Is this confirmed to fit lhd swapped s chassis anyone had success

[sleeper108]

what i really want to see is the price on that tomei arms kit