Enjuku Racing - ISIS RS3871 Turbo ** As used by Chris Forsbergs Drift Garage Missile

[Enjuku Racing]

ISIS RS3871 Turbo ** As used by Chris Forsbergs Drift Garage Missile Car **



Click Here to View ISIS RS3871 Turbo and Buy Now !!

If you havent Seen the Show Be sure to check out Chris Forsbergs "Drift Garage" On Youtube channel NetworkA

Chris Builds a budget 240sx Missile Car and uses the ISIS RS3871 on his KA-T.

Episode 1 - http://www.youtube.com/watch?v=XAb9NuqGJNs

Episode 2 - http://www.youtube.com/watch?v=dPhAJlDnRBA

Episode 3 - http://www.youtube.com/watch?v=OUCmWEPEkP4

Episode 4 - http://www.youtube.com/watch?v=sahwZktoi4E

Response Video - http://www.youtube.com/watch?v=0HRE-XLivN4

[r34sr]

This is an excellent little turbo....however id like to know what enjuku and others are using for a wastegate? cause the stock one becomes useless very quickly...ive gone from holding 12 psi with spikes to 15 psi...to simply spiking 22 psi......on the softest setting it just spools horribly and eventually hits 15 psi.

Once again the turbo is GREAT but the actuator needs to be replaced.

What do you use enjuku?

[Enjuku Racing]

Originally Posted by r34sr

This is an excellent little turbo....however id like to know what enjuku and others are using for a wastegate? cause the stock one becomes useless very quickly...ive gone from holding 12 psi with spikes to 15 psi...to simply spiking 22 psi......on the softest setting it just spools horribly and eventually hits 15 psi.

Once again the turbo is GREAT but the actuator needs to be replaced.

What do you use enjuku?

R34sr, you probably got a faulty actuator. Give us a ring and we will send out an upgraded ISIS billet actuator your way.

[NAKAFTW]

so the kit they run in the video is the intercooler kit and the turbo upgrade kit?? im just a little confused, or is it just the turbo upgrade kit that comes with the front mount and piping too??

[Enjuku Racing]

Originally Posted by NAKAFTW

so the kit they run in the video is the intercooler kit and the turbo upgrade kit?? im just a little confused, or is it just the turbo upgrade kit that comes with the front mount and piping too??

Correct, this video features a turbo kit and intercooler kit from ISIS performance.

Turbo kit includes :

ISIS RS3871 Turbo (rated to ~380hp)
ISIS V2 Bottom Mount Turbo Manifold
ISIS Turbine O2 Housing
ISIS Turbo lines
ISIS Intake Kit
All gaskets, couplers, clamps and hardware

You have the option to add an Enthalpy Rom tune, injectors and z32 MAF.

FMIC kit sold separately.

[NAKAFTW]

well then im confused by your website then... haha, here it says this:
Product Description
ISIS [I-sis] Turbo Upgrade Kit for your Nissan KA24DE

Kit Includes:

ISIS RS3871 Turbo (rated to ~380hp)
ISIS V2 KA24DE Bottom Mount Turbo Manifold
ISIS Turbine O2 Housing
ISIS Downpipe
ISIS Intake Kit
ISIS KA-T Front Mount Intercooler Kit

Finally an Inexpensive KAT kit. This is is not 100% complete. You will still need to get your oil feed and drain lines taken care of. We do not have a line kit for the KA as of yet.

When doing a bottom mount KAT the downpipe will be very close to the floor board. You can either clearance the downpipe and floor board, or purchase Xcessive KA Lowing Brackets.

This kit does not come with a blow off valve flange, please call if you would like to have one added.

that is all from this link here, http://www.enjukuracing.com/products...91%252d98.html
it says the FMIC is included in the description... im not trying to be difficult... im just trying to understand, haha

[Enjuku Racing]

Originally Posted by NAKAFTW

well then im confused by your website then... haha, here it says this:
Product Description
ISIS [I-sis] Turbo Upgrade Kit for your Nissan KA24DE

Kit Includes:

ISIS RS3871 Turbo (rated to ~380hp)
ISIS V2 KA24DE Bottom Mount Turbo Manifold
ISIS Turbine O2 Housing
ISIS Downpipe
ISIS Intake Kit
ISIS KA-T Front Mount Intercooler Kit

Finally an Inexpensive KAT kit. This is is not 100% complete. You will still need to get your oil feed and drain lines taken care of. We do not have a line kit for the KA as of yet.

When doing a bottom mount KAT the downpipe will be very close to the floor board. You can either clearance the downpipe and floor board, or purchase Xcessive KA Lowing Brackets.

This kit does not come with a blow off valve flange, please call if you would like to have one added.

that is all from this link here, http://www.enjukuracing.com/products...91%252d98.html
it says the FMIC is included in the description... im not trying to be difficult... im just trying to understand, haha

My apologies for the mixup. Yes, this particular kit DOES come with a FMIC kit. I was looking at an old listing we had on our backsite. Sorry for the confusion.

- Sam

[dcwake]

Could I have a qoute for this turbo shipped to 33967?

Thanks

[Enjuku Racing]

Originally Posted by dcwake

Could I have a qoute for this turbo shipped to 33967?

Thanks

Just sent a Pm your way.

[bmar19]

I have a rs3871 turbo that came with my motor I bought. I want to get braided lines. Do you guys have a kit for this turbo. I know it has a 3an feed so I'm curious if you have something that fits the turbo

[Enjuku Racing]

Originally Posted by bmar19

I have a rs3871 turbo that came with my motor I bought. I want to get braided lines. Do you guys have a kit for this turbo. I know it has a 3an feed so I'm curious if you have something that fits the turbo

Yes we sell aftermarket lines that will work with your setup. Please feel free to contact us at the office for further assistance.

1-888-SR20DET