Bucket Seats on a Budget - Back again for Round 5!

[Sonic Motor]

This group buy closes on May 15th. AKA TOMORROW!

The most epic seat groupbuy of all time now back on Zilvia for the fifth round!!!

- Our trusted line of full racing bucket seats.
- Each bucket seat is made from Fiberglass Reinforced Plastic (FRP)<--unless its the CF ones
- Wrapped in high quality ALCANTARA & CLOTH FABRIC.


SPECIAL NOTE: There will be 12-16 SLOTS open for the people of Zilvia just like before. When the 12-16 slots have been filled, the group order will be placed and the seats will be manufactured. Once the seats have been manufactured they will ship out. The manufacturing and shipping process usually takes up to 6-10 weeks.

__________________________________________________ ___

How this works:
1. Place your deposit of at least 50% of the total value of the seat or seats (non-logo only).
2. We order the seats, and have them come over in a container from overseas.
3. (Local Customers) Seat comes in stock and you pay for the rest upon pickup.
3. (Non-Local Customers) We send you an invoice and you pay for the rest of the seat(s). The seats will then be shipped out to you.

Certain seats will be available with a "LOGO." All LOGO and full carbon fiber seats will need to be pre-paid in full.

If you have any questions feel free to contact us through PM or on AIM: carparthookup
__________________________________________________ ___
G3 Seat, JGTC Inspired seat.



MSRP: $1700/seat
AVAILABLE in BLACK ONLY or Red Only with LOGO SERVICE

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our widest seat. Recommended for bigger taller guys!
Width Outer Shoulder Area: 23
Width Bottom, Widest Point: 23
Width Inner Shoulder Area: 12
Width Inner Lumbar Area:
Width Inner Seat Area: 14
Height: 36

__________________________________________________ __
VS3 Seat



Conservative design, just everything you need in a racing seat. Low max system equipped.

AVAILABLE in BLACK or RED
MSRP: $700/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our skinniest seat.
Width Outer Shoulder Area: 21.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 11
Width Inner Seat Area: 13
Height: 35

__________________________________________________ __
SP2 Seat



A seat inspired by the BTCC. Features excellent lateral grip on the entire body. Fits average sized drivers. Seat is available with either fiberglass or carbon fiber shell. Perfect for driver who is looking for full bucket seat and is not super slim around the waist.

AVAILABLE in BLACK, RED
MSRP: $700/Seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
logo, CF overlay shell: $420
logo, Real CF shell: $710

__________________________________________________ __
P2 Seat



P2 seat, A true motorsport racing shell virtually tailored to the driver's body. Its anatomically shaped frame, and excellent lateral support allow for maximal driver comfort under extreme stress.

AVAILABLE in BLACK or RED
MSRP: $700/Seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $500
logo, CF overlay shell: $600
logo, Real CF shell: $780


Dimensions: Wider than VS3, Skinnier than G3
Width Outer Shoulder Area: 23.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 12
Width Inner Seat Area:1 3
Height: 35
__________________________________________________ __
GS Seat, Reclinable Bucket Seat



GS seat, the reclining bucket seats. This seat sits super low for a bottom mount seat. Similar to the Bride Low max system. Beautifully upholstered with red stitching.

AVAILABLE in BLACK or RED, and Black with gradation.
MSRP: $1300/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830


Dimensions:
Width Outer Shoulder Area: 22
Width Bottom, Widest Point: 19
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 10.5
Width Inner Seat Area: 13
Height: 33
__________________________________________________
CG Seat



CG Seats- Introducing the reclineable bucket with FRP/Carbon Kevlar shell/backing. This seat is one of the most popular in Japan, street, drift and time attack. Lightweight but with increased rigidity when compared to the discontinued B2 seats.

AVAILABLE in BLACK or RED or BLUE
MSRP: $800 per seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35

__________________________________________________ __

Non bucket seats are available for those of you looking for some with more comfort!
__________________________________________________ __
E2 and DG Seats



E2 seat and DG seat, introducing reclining seats are created for racing, with daily driveability and comfort in mind.

MSRP: $700/seat

Prices for A PAIR(for single, just take off half the price):
No logo, cloth: $350
No logo, CF overlay shell: $N/A
No logo, Real CF shell: $N/A

Logo, cloth: $490
Logo, CF overlay shell: $N/A
Logo, Real CF shell: $N/A

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35
__________________________________________________ __
RSS Seat



RSS Seats aka Recaro SRD style seats, Eye-catching design keenly masks its superb comfort features. Underneath its racy looks and sporty styling are all the advanced engineering features and sophisticated technical details a performance-seeking driver could want.

AVAILABLE IN BLACK VINYL, BLACK CLOTH WITH RED STITCHING, OR RED
MSRP: $700/seat

No logo, Black vinyl: $300
No logo, Cloth: $300
No logo, Real CF shell: $N/A

No logo service for these seats.

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 11.5
Width Inner Lumbar Area:
Width Inner Seat Area: 13.5
Height: 35


NOTE:
- All blue and red seats are $20 more for the pair.

- All seats come with universal SLIDERS, but the bracket will need to be purchased separately.

__________________________________________________ __ __

Shipping is available! Shipping one seat will cost the same as a pair because the shipping rate is determined by dimensional weight; not actual weight.

Flat rate shipping for 48 continental states
Business address rate: $125 for US customers.
Residential addresss rate: $150 for US customers.

AK, PR, Hi, Canada, or any other international customers please contact me for a quote.

Payments:
- Local pickup
- Cash (bring cash, tax included)
- Paypal (3% paypal fee will apply for local pickup only)
- Credit card (9.75% CA tax will apply)
- Fill out our form for pre-order, and you are all set!

Out of town people
Paypal email address: [email protected]

HOW TO ORDER:

1. Go to Sonic Motor - Power and Performance
2. Find the seat of your choice
3. Choose the seat trims of your choice
4. Add to cart
5. Enter code "nologo" for non-logo seats. (Only pay for half the value of the seat, non-logo ONLY)
6. Enter code "noship" (No need to pay for shipping until the seats arrive)

After that, your order is complete and you will be added to the group buy. Email or PM me after you have placed the order to confirm that you are on the group buy. Please also email or PM if you encounter any problems during checkout. Thanks.

If you have any questions or concerns, please PM or post.

Our Address:
315 Cloverleaf DR STE C
Baldwin Park, CA 91706
626-363-9036

Email: [email protected]
Aim: carparthookup
I'm online during regular business hours.

Open Regular Business Hours
Mon-Friday 9am-6pm
Sat. 9am-3pm
Sun. Closed


Cancellation is subject to a 15% restocking fee for non logo seats
Cancellation is subject to a 20%-restocking fee for seats with Logos.
_____________________________________________

Want to "test sit" a seat before purchasing? Come to our shop and take a seat in the seat you are intersted in. We have every single seat for you to "test sit."

Thank you everyone for your support!!!

Group Buy Round List of Paid
1. Josh Bunnell
2. Florante Rea
3. Andrew's Friend
4. Nilayam Patel
5. Peter Kim
6. Martin Sarukhanyan
7. Mario Montoya
8. Emmanuel Adamopoulos
9. David Nong
10. Matthew Ring
11. Werner Castillo / Enrique
12. Daniel An
13. Howard Chen
14. Alexander Hsieh

If you ordered a seat and don't see your name on the list please call or email me!

This group buy closes on May 15th. AKA TOMORROW!

[thelrgkid]

I was looking at the dg seats but if it comes with the logo what would the logo be?

[murda-c]

God i wish i could test sit one of those recliners.

Prolly to small anyway.

[mehsilvia]

Originally Posted by murda-c

God i wish i could test sit one of those recliners.

Prolly to small anyway.

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.

[Sonic Motor]

Originally Posted by thelrgkid

I was looking at the dg seats but if it comes with the logo what would the logo be?

PM me for details.

Originally Posted by mehsilvia

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.

I didn't know you were such a big fan of our seats Chris? haha. But yes, they are awesome seats.

All PM's replied.

[mehsilvia]

Originally Posted by carparthookup

I didn't know you were such a big fan of our seats Chris? haha. But yes, they are awesome seats.

All PM's replied.

Wasnt. Till i sat in one.

[enkei2k]

hmm...i have a torino 2 that i'm looking to get rid of, maybe i can get these instead...if someone would buy it first of course. i wish i jumped in the last GB though. procrastinating sucks.

if i get these with rails, will the rails ship together or separatE?

[NINJASPY]

Any rails that sit lower than the buddy club rails?
I got a vs3 and I love it but I would like to sit a little bit lower, the sliders on the buddy club rails get in the way of the seat being mounted lower.

[alindeman1989]

im 6,1 im between a 34-36 waiste. around 210. what seat would fit me best? full bucket non recline

[JayDee M Rolly]

Originally Posted by mehsilvia

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.

did you sit in the SP2 by any chance? very curious about that seat.

[mehsilvia]

Originally Posted by JayDee M Rolly

did you sit in the SP2 by any chance? very curious about that seat.

LOL. No i havent.

Perhaps they will pay me to be a SonicMotor Model

They have them all setup in a show room for you to testdrive yourself. You should stop by the shop and check em out!

[WISH ONE]

Originally Posted by murda-c

God i wish i could test sit one of those recliners.

Prolly to small anyway.

My shoulders/upper torso didnt fit in my GS reclineable at all, i had to sell it. Im going to try and get the sp2 next.

[Moon Ill]

Does the GS sit the lowest in the S13 chassis?

[Psycho 240 Freak]

Originally Posted by WISH ONE

My shoulders/upper torso didnt fit in my GS reclineable at all, i had to sell it. Im going to try and get the sp2 next.

How big are you?

[alindeman1989]

im 6'1 ish and around 205-210. between a 34-36 waist. what seat can i fit? bucket non recline

[Sonic Motor]

Originally Posted by enkei2k

if i get these with rails, will the rails ship together or separatE?

They will ship together with the seats with no additional cost.

Originally Posted by NINJASPY

Any rails that sit lower than the buddy club rails?
I got a vs3 and I love it but I would like to sit a little bit lower, the sliders on the buddy club rails get in the way of the seat being mounted lower.

Nagisa, or Bride FG.

Originally Posted by alindeman1989

im 6,1 im between a 34-36 waiste. around 210. what seat would fit me best? full bucket non recline

I would say the P2 or SP2. I think the SP2 would be more comfortable.

Originally Posted by mehsilvia

LOL. No i havent.

Perhaps they will pay me to be a SonicMotor Model

They have them all setup in a show room for you to testdrive yourself. You should stop by the shop and check em out!

haha. You have to make sexy faces while sitting in the seats.

And yes, I have all of them in stock for anyone to try out!

Originally Posted by Moon Ill

Does the GS sit the lowest in the S13 chassis?

If you want low, you will need to get a side mount seat. OR, you can have the GS welded straight to the mounting bracket. It will be low, but non-adjustable.

[florante rea]

already sent payment for cg seat, thank you.

[slipinslider_s13]

sombody buy 2 red recliners and ill trade you my 180sx seats for them!!!!!

[sidedrifts13]

im 5'7 weigh 178 waiste is 34 what seat would be good

[Moon Ill]

Are any of these side mount?

[Sonic Motor]

Originally Posted by sidedrifts13

im 5'7 weigh 178 waiste is 34 what seat would be good

The P2 would be best for you.

Originally Posted by Moon Ill

Are any of these side mount?

All the full bucket seats are side mount.

All PM's replied!

[alindeman1989]

do you have dimesions for the sp2?

[Sonic Motor]

Originally Posted by alindeman1989

do you have dimesions for the sp2?

Just PM'ed them to you. =)

All other PM's replied.

[ernestz300z]

I'm about 5'11 36 waist+ would the GS seat be comfortable

[chaseSR86]

im a fatt ass 5"11' 220lbs can I fit into a P2?

[Sonic Motor]

Originally Posted by ernestz300z

I'm about 5'11 36 waist+ would the GS seat be comfortable

You can fit, but it will be a very tight fit. The DG and CG seats are wider and the side supports aren't as high.

Originally Posted by chaseSR86

im a fatt ass 5"11' 220lbs can I fit into a P2?

Same as above. The SP2 seat will be a better fit.

[C2AUTOSPL]

Do u have any RED CG seats laying there at the warehouse?

[Sonic Motor]

Originally Posted by C2AUTOSPL

Do u have any RED CG seats laying there at the warehouse?

Sorry, don't have any red at the moment. Or any CG's for that matter. I MIGHT have some extra CG's coming in at the end of this month.

[C2AUTOSPL]

I will give you a call sometime next week then.

[Z33dori]

(1)p2 shipped 45801