Odd compression and white smoke - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Deadbeat117 · 02-03-2016, 11:18 AM

Need help. I have a 91 s13 coupe with a ka24de. When I start the car and give it gas it blows some white smoke not to much tho. I did a compression test and these are the results.
1st cylinder: 160
2n:180
3rd:180
4Th: 180 and dropping.
I think this is a coolant issue since the smoke is white and there is only small puffs when I give it gas in neutral. I've also found that my water pump was bad as the coolant isn't flowing in the radiator when you open the radiator cap. Any help as to what this might be would be greatly appreciated.

Lex Zarza · 04-26-2022, 10:46 PM

could be you're valve gaskets inside the cylinder block. wearing out, could buy an small camera from home depo. camera that has a long cord like. and fish it threw into the combustion chamber to confirm where's its leaking.

coupesallday! · 04-26-2022, 11:21 PM

Quote:

Originally Posted by Lex Zarza

could be you're valve gaskets inside the cylinder block. wearing out, could buy an small camera from home depo. camera that has a long cord like. and fish it threw into the combustion chamber to confirm where's its leaking.

Are you retarded? This post is 6 years old

02-03-2016, 11:18 AM	#1
Deadbeat117 Join Date: Feb 2016 Location: Ponchatoula, Louisiana Age: 27 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	Odd compression and white smoke Need help. I have a 91 s13 coupe with a ka24de. When I start the car and give it gas it blows some white smoke not to much tho. I did a compression test and these are the results. 1st cylinder: 160 2n:180 3rd:180 4Th: 180 and dropping. I think this is a coolant issue since the smoke is white and there is only small puffs when I give it gas in neutral. I've also found that my water pump was bad as the coolant isn't flowing in the radiator when you open the radiator cap. Any help as to what this might be would be greatly appreciated.

04-26-2022, 10:46 PM	#2
Lex Zarza Join Date: Aug 2019 Location: Arizona Age: 29 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	could be you're valve gaskets inside the cylinder block. wearing out, could buy an small camera from home depo. camera that has a long cord like. and fish it threw into the combustion chamber to confirm where's its leaking.