Kazama Hard Suspension Groupbuy Auto RnD - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AutoRnD · 12-01-2005, 11:23 AM

We at Auto RnD would like to offer the zilvia community Kazama Hard suspension parts.

Terms: Payment must be made in full. Items will not ship out till 15 orders have been received. Local pickup is welcome. Once 15 orders have been received products will ship out within 1-2 weeks.

Groupbuy ends December 31st of 2005

Payment: Paypal to [email protected] is always acceptable.
You can also pay via CC by calling 408 635 0000 ext 0#
Stop by the shop and hand us cash at
Auto RnD
1503 N Milpitas Blvd
Milpitas Ca 95035

When ordering please mention Zilvia.net. Also note which year 240sx you have as well as your phone number and Zilvia.net username.

Business hours are M-F 9-6 PST

Due to Super low prices, please call for pricing.

We are offering

Kazama Tc Rod S13/S14

Kazama Tie Rod End S13/S14

Kazama Inner Tie Rod S13/S14

Kazama Tension Rod Brace S13/S14

Kazama Rear Upper Control Arm n Toe Rod Kit S13/S14

Kazama Toe Rod S13/S14

Kazama Rear Upper Control Arm S13/S14

Kazama Traction Control Rod S13/S147

Kazama Subframe Spacers S13/S14

Kazama Hard Engine Mounts S13/S14

OptionZero · 12-01-2005, 11:35 AM

I'm at work and can't call (at the moment), but you have PM.

AutoRnD · 12-01-2005, 06:56 PM

Ok guys, I have been asked a few times what each of these rods and braces and such do for the vehicle. Here is a quick and simple rundown.

1) TC Rod : Also knows as tension control, this rod allows adjustment of caster on the front wheels. Also replaces factory bushing that is notorious for going out on you. Also great for anyone who has had an accident as it will allow you to adjust caster back to factory specs.
2) Tie Rod Ends : Replaces factory rod ends, this will allow you to control bump steer on lowered cars. This will give you more direct steering feel.
3) Inner Tie Rods : Hardened rod that gives you more angle without the danger of losing thread engagement. Great for drifting or the daily driver. With these on the car you can make a u turn down a 1 lane road 2 way road.
4) Tension Rod Brace : This brace attaches to the factory tension rod bracket. It boxes the chassis to allow for a stiffer front end providing better response from vehicle
5) Rear Upper Control Arm : This allows you to adjust camber in the rear of the vehicle. 240sx’ are known to have notorious camber once lowered. You can fix that with this piece.
6) Toe Rod : This rod control rear toe angles. As you lower the vehicle toe also becomes out of whack. The lower you go the more it needs to get adjusted. Factory vehicles do have some toe adjustment but when you slam your car this is what you need.
7) Traction Rod : This rod allows you to dial in the bump steer in relation with the toe rod bringing your suspension geometry back into specifications of factory to account for severe lowering.
8) Subframe Spacers : This is the best thing ever invented. Most cars out there are starting to come of age. This actually is an insert to throw between the top and bottom of the stock subframe bushings. Most 240’s have a floating feeling in the rear. This spacer will help to eliminate or greatly reduce it. Top piece is slotted for ease of installation. No need to fully drop the subframe just lower it a little and slide it in.
9) Hard Engine Mounts : These engine mounts will transfer more vibration to the chassis but will also have a stiffer motor in the process. Rev’s will be quick and no longer sloppy.

***On a side note***
After any modifications to the suspension, a Professional Alignment is highly recommend to prevent hazardous handling or improper tire wear

***FaLKoN240*** · 12-01-2005, 07:46 PM

Dang, I missed you on AIM, so PM here I come.

whooha1217 · 12-01-2005, 09:16 PM

how much for the subframe spacer shipped to 07733

Slidin240Wayz · 12-01-2005, 09:26 PM

make that 2 SS's to NJ. 07083.

Wishing you the best,
Carlos Doria

Slidin240Wayz · 12-01-2005, 09:26 PM

Make that 2 SS's to NJ. 07083.

Wishing you the best,
Carlos Doria

AutoRnD · 12-02-2005, 11:28 AM

ok guys pm have been sent.

*HaLo* · 12-02-2005, 01:06 PM

price for the inner tie-rod ends?

boosteds13 · 12-02-2005, 04:21 PM

Just out of curiosity, are you able to get the Kazama Hicas eliminator bar? If so, price?

enen11 · 12-03-2005, 10:29 PM

price for tie rod ends and inner tie rods

2forty · 12-03-2005, 10:40 PM

price for inner tie-rod, sub frame-spacers, and RUCA's s13, thanks

sdtouge · 12-04-2005, 01:21 AM

sent you a aim thing but you werent there

price on
tension rods
motor mounts
traction rods

individually and all together please.
also this will be pick up i think (miltipas is socal?)
thanks
matt

***FaLKoN240*** · 12-04-2005, 02:04 AM

Milpitas is Norcal, south bay.

reccakun08 · 12-04-2005, 02:18 PM

subframe bushing shipped to 20853

honduh · 12-05-2005, 02:01 AM

PM sent, waiting for reply

AutoRnD · 12-05-2005, 10:41 AM

ok guys, whew its been a long ass week.
anyways pms have all been sent..
pay now and you get your items once gb is complete

AutoRnD · 12-06-2005, 10:30 AM

bump for kazama... get your suspension fix right now!!!!
i suggest the toe/ruca combo package as it is a super good deal

AutoRnD · 12-06-2005, 10:30 AM

bump for kazama... get your suspension fix right now!!!!
i suggest the toe/ruca combo package as it is a super good deal

mr_240sx · 12-08-2005, 08:14 PM

hey Josh! After talking to you on AIM, ive decided to get some kazama suspension arms! can you please e-mail me a price for

-Tie rod ends
-Tension rod brace
-RUCA's
-Subframe Spacers
* for s13

PS: shipping would be to Brockville, Ontario (k6v 6z3)

could you please e-mail me the prices please and ty.

baribeau AT hotmail.com

Mats

i_am_jon · 12-09-2005, 12:52 PM

Sent you a pm again...

mr_240sx · 12-09-2005, 05:48 PM

how many people have confired their payments so far?

AutoRnD · 12-09-2005, 08:50 PM

ok so far i recieved mr_240sx payment..
keep em coming..
and stop lagging guys

phanzy108 · 12-09-2005, 09:45 PM

how much for the RUCA S13???

thanks

trsilvias13 · 12-09-2005, 10:05 PM

how much for the motor mounts?

MiamiGrinch240 · 12-10-2005, 04:27 AM

PM Sent.

AutoRnD · 12-12-2005, 11:02 AM

replies have been sent...

n2n2i · 12-12-2005, 04:42 PM

Just curious if this group buy will be continuing after christmas?

toraji · 12-12-2005, 05:50 PM

could you pm / email me the price for engine mounts? for s14
[email protected]? thanks

oneviaman · 12-12-2005, 06:05 PM

price for tc rods, tie rods(inner/outer), Rear Upper Control Arm n Toe Rod Kit,and traction rods for s13 shipped to 33334
[email protected]

12-01-2005, 11:23 AM	#1
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	Kazama Hard Suspension Groupbuy Auto RnD We at Auto RnD would like to offer the zilvia community Kazama Hard suspension parts. Terms: Payment must be made in full. Items will not ship out till 15 orders have been received. Local pickup is welcome. Once 15 orders have been received products will ship out within 1-2 weeks. Groupbuy ends December 31st of 2005 Payment: Paypal to [email protected] is always acceptable. You can also pay via CC by calling 408 635 0000 ext 0# Stop by the shop and hand us cash at Auto RnD 1503 N Milpitas Blvd Milpitas Ca 95035 When ordering please mention Zilvia.net. Also note which year 240sx you have as well as your phone number and Zilvia.net username. Business hours are M-F 9-6 PST Due to Super low prices, please call for pricing. We are offering Kazama Tc Rod S13/S14 Kazama Tie Rod End S13/S14 Kazama Inner Tie Rod S13/S14 Kazama Tension Rod Brace S13/S14 Kazama Rear Upper Control Arm n Toe Rod Kit S13/S14 Kazama Toe Rod S13/S14 Kazama Rear Upper Control Arm S13/S14 Kazama Traction Control Rod S13/S147 Kazama Subframe Spacers S13/S14 Kazama Hard Engine Mounts S13/S14 __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook! Last edited by AutoRnD; 12-01-2005 at 06:40 PM..

12-01-2005, 06:56 PM	#3
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	Ok guys, I have been asked a few times what each of these rods and braces and such do for the vehicle. Here is a quick and simple rundown. 1) TC Rod : Also knows as tension control, this rod allows adjustment of caster on the front wheels. Also replaces factory bushing that is notorious for going out on you. Also great for anyone who has had an accident as it will allow you to adjust caster back to factory specs. 2) Tie Rod Ends : Replaces factory rod ends, this will allow you to control bump steer on lowered cars. This will give you more direct steering feel. 3) Inner Tie Rods : Hardened rod that gives you more angle without the danger of losing thread engagement. Great for drifting or the daily driver. With these on the car you can make a u turn down a 1 lane road 2 way road. 4) Tension Rod Brace : This brace attaches to the factory tension rod bracket. It boxes the chassis to allow for a stiffer front end providing better response from vehicle 5) Rear Upper Control Arm : This allows you to adjust camber in the rear of the vehicle. 240sx’ are known to have notorious camber once lowered. You can fix that with this piece. 6) Toe Rod : This rod control rear toe angles. As you lower the vehicle toe also becomes out of whack. The lower you go the more it needs to get adjusted. Factory vehicles do have some toe adjustment but when you slam your car this is what you need. 7) Traction Rod : This rod allows you to dial in the bump steer in relation with the toe rod bringing your suspension geometry back into specifications of factory to account for severe lowering. 8) Subframe Spacers : This is the best thing ever invented. Most cars out there are starting to come of age. This actually is an insert to throw between the top and bottom of the stock subframe bushings. Most 240’s have a floating feeling in the rear. This spacer will help to eliminate or greatly reduce it. Top piece is slotted for ease of installation. No need to fully drop the subframe just lower it a little and slide it in. 9) Hard Engine Mounts : These engine mounts will transfer more vibration to the chassis but will also have a stiffer motor in the process. Rev’s will be quick and no longer sloppy. *On a side note* After any modifications to the suspension, a Professional Alignment is highly recommend to prevent hazardous handling or improper tire wear __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-01-2005, 07:46 PM	#4
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,885 Trader Rating: (73) Feedback Score: 73 reviews	Dang, I missed you on AIM, so PM here I come. __________________ Best way to do business with me? Make your best offer FIRST.

12-01-2005, 09:16 PM	#5
whooha1217 Zilvia Addict Join Date: Feb 2004 Location: NJ Age: 41 Posts: 800 Trader Rating: (3) Feedback Score: 3 reviews	how much for the subframe spacer shipped to 07733 __________________ Nicely Moded S14 For sale

12-02-2005, 11:28 AM	#8
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	ok guys pm have been sent. __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-01-2005, 11:35 AM	#2
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 40 Posts: 6,262 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	I'm at work and can't call (at the moment), but you have PM.

12-01-2005, 09:26 PM	#6
Slidin240Wayz Post Whore! Join Date: Jan 2005 Location: Everywhere Age: 39 Posts: 5,427 Trader Rating: (9) Feedback Score: 9 reviews	make that 2 SS's to NJ. 07083. Wishing you the best, Carlos Doria

12-02-2005, 01:06 PM	#9
HaLo from Canada, eh! Join Date: Sep 2001 Location: Montreal, Quebec Age: 45 Posts: 5,201 Trader Rating: (0) Rides Gallery: HaLo Feedback Score: 0 reviews	price for the inner tie-rod ends? __________________ -> HaLo Race Car: '98 E36 BMW M3 Daily Drivers: '23 Audi Q4 e-tron & '13 VW Touareg SOLD: 01 GPW Honda S2000 PARTED: 93 Pearl White 240SX LE Fastback w/SR20DET SOLD: 93 Super White 240SX SE Convertible w/Silvia Front

12-02-2005, 04:21 PM	#10
boosteds13 Zilvia Addict Join Date: Nov 2003 Location: Port Orange, FL Posts: 623 Trader Rating: (0) Rides Gallery: boosteds13 Feedback Score: 0 reviews	Just out of curiosity, are you able to get the Kazama Hicas eliminator bar? If so, price? __________________ "A CA? WTF is that? You shoulda got an SR yo." View my vBPicGallery!

12-03-2005, 10:29 PM	#11
enen11 Zilvia Member Join Date: May 2005 Location: 240sx Posts: 184 Trader Rating: (0) Feedback Score: 0 reviews	price for tie rod ends and inner tie rods

12-03-2005, 10:40 PM	#12
2forty Nissanaholic! Join Date: Jan 2003 Location: sacramento, CA Posts: 1,659 Trader Rating: (15) Feedback Score: 15 reviews	price for inner tie-rod, sub frame-spacers, and RUCA's s13, thanks __________________ TEAM SKIDMARKS Carbon black S13 SR Coupe

12-04-2005, 01:21 AM	#13
sdtouge BANNED Join Date: Dec 2004 Location: san diego Posts: 479 Trader Rating: (0) Feedback Score: 0 reviews	sent you a aim thing but you werent there price on tension rods motor mounts traction rods individually and all together please. also this will be pick up i think (miltipas is socal?) thanks matt

12-04-2005, 02:04 AM	#14
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,885 Trader Rating: (73) Feedback Score: 73 reviews	Milpitas is Norcal, south bay. __________________ Best way to do business with me? Make your best offer FIRST.

12-04-2005, 02:18 PM	#15
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 39 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	subframe bushing shipped to 20853

12-05-2005, 02:01 AM	#16
honduh Leaky Injector Join Date: Oct 2004 Location: Indiana Age: 39 Posts: 99 Trader Rating: (0) Feedback Score: 0 reviews	PM sent, waiting for reply

12-05-2005, 10:41 AM	#17
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	ok guys, whew its been a long ass week. anyways pms have all been sent.. pay now and you get your items once gb is complete __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-06-2005, 10:30 AM	#18
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	bump for kazama... get your suspension fix right now!!!! i suggest the toe/ruca combo package as it is a super good deal __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-08-2005, 08:14 PM	#20
mr_240sx Post Whore! Join Date: Nov 2004 Location: Ottawa Age: 37 Posts: 6,320 Trader Rating: (4) Rides Gallery: mr_240sx Feedback Score: 4 reviews	hey Josh! After talking to you on AIM, ive decided to get some kazama suspension arms! can you please e-mail me a price for -Tie rod ends -Tension rod brace -RUCA's -Subframe Spacers * for s13 PS: shipping would be to Brockville, Ontario (k6v 6z3) could you please e-mail me the prices please and ty. baribeau AT hotmail.com Mats

12-09-2005, 12:52 PM	#21
i_am_jon Leaky Injector Join Date: Aug 2005 Location: oxnard Age: 39 Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	Sent you a pm again...

12-09-2005, 05:48 PM	#22
mr_240sx Post Whore! Join Date: Nov 2004 Location: Ottawa Age: 37 Posts: 6,320 Trader Rating: (4) Rides Gallery: mr_240sx Feedback Score: 4 reviews	how many people have confired their payments so far?

12-09-2005, 08:50 PM	#23
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	ok so far i recieved mr_240sx payment.. keep em coming.. and stop lagging guys __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-09-2005, 09:45 PM	#24
phanzy108 Zilvia Member Join Date: Oct 2003 Location: Stockton,CA Posts: 190 Trader Rating: (0) Feedback Score: 0 reviews	how much for the RUCA S13??? thanks __________________

12-09-2005, 10:05 PM	#25
trsilvias13 Nissanaholic! Join Date: Nov 2001 Posts: 1,994 Trader Rating: (5) Feedback Score: 5 reviews	how much for the motor mounts?

12-10-2005, 04:27 AM	#26
MiamiGrinch240 Zilvia Member Join Date: Mar 2002 Location: Miami, FL. Posts: 227 Trader Rating: (4) Feedback Score: 4 reviews	PM Sent. __________________ 98 S14 SE KA-T (Original Owner) Founder of SFL240SX

12-12-2005, 11:02 AM	#27
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1) Rides Gallery: AutoRnD Feedback Score: 1 reviews	replies have been sent... __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!

12-12-2005, 04:42 PM	#28
n2n2i Join Date: Jun 2004 Location: Atlanta Posts: 44 Trader Rating: (0) Feedback Score: 0 reviews	Just curious if this group buy will be continuing after christmas?

12-12-2005, 05:50 PM	#29
toraji Leaky Injector Join Date: May 2004 Location: california Age: 43 Posts: 87 Trader Rating: (0) Feedback Score: 0 reviews	could you pm / email me the price for engine mounts? for s14 [email protected]? thanks

12-12-2005, 06:05 PM	#30
oneviaman Leaky Injector Join Date: Sep 2005 Location: oakland park,fl Age: 39 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	price for tc rods, tie rods(inner/outer), Rear Upper Control Arm n Toe Rod Kit,and traction rods for s13 shipped to 33334 [email protected] Last edited by oneviaman; 12-12-2005 at 06:22 PM..