Pic Request Thread, No Photoshops - Page 127 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JVD · 04-29-2009, 08:27 AM

Quote:

Originally Posted by number80

Looking for an S14 pic with "Low Offset" Advan RS or RZ. I've checked out the evo forums and they have them but they're mostly in +29 offset. I hope somebody has a pic of a +15 or so in a S14.

Not sure of the size.... but you get the idea. Looks amazing.

Icy13 · 04-29-2009, 04:13 PM

If someone could please run out to their Kouki and snap a few pics of the headlights with a tape measure next to the indicated critical points (A-E) I would be immensely pleased:

Incidentally, "B" is located at the point where the headlight meets the corner light.

Also, a pic of the hood popped and a tape measure near the cavity behind the front where the headlight sits would be greet (i.e. the depth of the headlight into the body).

I need this information to complete my kouki conversion as I wish to do a custom lighting setup and I need to know what size lights will work.

Thanks for any help anyone can give,
Icy

dued · 04-29-2009, 05:55 PM

Hi, Looking for pics of red navan s14 zenki (especially navan front bumper).

ilike2drive21 · 04-29-2009, 06:48 PM

Quote:

Originally Posted by blackrms13

i dont think they make those wheels in those offset
unless u mistake + for -

they do all the old z guys are running them. if you go to rotas site you can see it

Kasai · 04-29-2009, 07:01 PM

Anyone have pics of the old Enkei S14.5? Used to have a poster of it back in the day, but I can't seem to find any pics atm

civilized_drifter · 04-29-2009, 11:15 PM

can any one find me a pic of a s13 with 17x9+22 advan sa3r's. im looking to see how flush it sits

cured13 · 04-30-2009, 02:09 AM

Pictures of mid-mount intercooler setups on s13 with A/C please!

ErocKs13 · 04-30-2009, 04:35 AM

Quote:

Originally Posted by civilized_drifter

can any one find me a pic of a s13 with 17x9+22 advan sa3r's. im looking to see how flush it sits

i have those exact specs on my coupe.

first pics: when i first put the wheels on with 245/45/17 and zero camber

Then this is after 20mm front overfenders, -2ish camber in the rear with a roll and 245/40/17's

hope that helped

Icy13 · 04-30-2009, 11:55 PM

Quote:

Originally Posted by Icy13

If someone could please run out to their Kouki and snap a few pics of the headlights with a tape measure next to the indicated critical points (A-E) I would be immensely pleased:

Incidentally, "B" is located at the point where the headlight meets the corner light.

Also, a pic of the hood popped and a tape measure near the cavity behind the front where the headlight sits would be greet (i.e. the depth of the headlight into the body).

I need this information to complete my kouki conversion as I wish to do a custom lighting setup and I need to know what size lights will work.

Thanks for any help anyone can give,
Icy

Please? It would be much appreciated

ilike2drive21 · 05-01-2009, 12:13 AM

good pics of work emitz on s14. i cant find any

newborn240 · 05-03-2009, 12:33 AM

hi i would like to get a close up pic of the paint of this S14. anyone knows what kind of metallic red this is? i want this paint for my car
I am serious so pls no BS. i dont wana end up painting it a different color because of YOU

kalypso123 · 05-03-2009, 01:36 AM

anyone using this bumper?

on a decent looking s13... proper offset... no wheel gap

hegamiz · 05-03-2009, 05:02 PM

Requesting more pics of this car, please

BeasT_MoDe · 05-03-2009, 09:38 PM

s14 preferably kouki w/ 17x10 +12 fno1r-c's all around. w/ aero would be a plus.

Rawrzies · 05-03-2009, 11:02 PM

VIP dish rims (Euroline DH, SSR Vienna, etc) on an S13 hatch?

I've only seen pics w/ S13 coupes and S14s.

jiggs · 05-04-2009, 12:08 AM

anybody got pics of a s13 vert with an s15 front with non vented fenders (oem look)

JVD · 05-04-2009, 11:09 AM

Quote:

Originally Posted by Rawrzies

VIP dish rims (Euroline DH, SSR Vienna, etc) on an S13 hatch?

I've only seen pics w/ S13 coupes and S14s.

I have more pics, but I'm lazy.

Rawrzies · 05-04-2009, 04:57 PM

^ thanks lol, I also found this pic of a local car

I'm still undecided if I should go this route

JVDSKYRINE · 05-04-2009, 09:12 PM

Quote:

Originally Posted by JVD

I have more pics, but I'm lazy.

There you go broseph

smellslikecurry · 05-05-2009, 11:54 AM

17x9+5
17x9 + 11

anyone have pics of these on the front or rear of a slammed hatch...not sort of slammed...im talking close to rim tuck

ILoveJDM · 05-05-2009, 12:14 PM

Quote:

Originally Posted by JVD

I have more pics, but I'm lazy.

heres a couple of mine, cellphone pic, but you get the idea

some from last year without aero

Trutrax · 05-05-2009, 05:11 PM

REQUEST: S14 usdm leather seats AND/OR JDM S14 Leather Seats. I'm wanting to compare them.

MadMaverick · 05-05-2009, 05:20 PM

REQUEST: Coupe with Autopower Cage and full interior.

Basically, I need to see where they cut the plastics to run the rear bars (the ones that go to the rear wheel wells. I only have one set of plastics and dont wanna screw them up!

NewS13Guy · 05-06-2009, 10:45 AM

Request: Fully polished 5Zigen Fn01rc's on a S13 hatch.

ilike2drive21 · 05-06-2009, 11:59 PM

i want to see pics of a either 215/45/17 or 215/45/17 on 17x9 wheel on a s14. No pancy height want to see it low with about 0 to +10 offset or so. need to know how it will look

k-love · 05-07-2009, 11:08 AM

Request:
Pictures or even specs on
WEDS ALBINO FIN wheels
I want to see them on anything, im trying to get an idea of the offset and how they look

only picture I can really find right now other than the ones in the ad (and they are on an accord)

lukeworx · 05-07-2009, 02:27 PM

Quote:

Originally Posted by dued

Hi, Looking for pics of red navan s14 zenki (especially navan front bumper).

hope this helps

my work in progress

Brian · 05-07-2009, 03:06 PM

Quote:

Originally Posted by ilike2drive21

i want to see pics of a either 215/45/17 or 215/45/17 on 17x9 wheel on a s14. No pancy height want to see it low with about 0 to +10 offset or so. need to know how it will look

FRONT - 17x9 +0 215/40-17
REAR - 17z9 +0 215/45-17 (some pics have +9)

richesmoua · 05-07-2009, 03:23 PM

Quote:

Originally Posted by kalypso123

anyone using this bumper?

on a decent looking s13... proper offset... no wheel gap

found this....

mod please remove my last two posts if you can....sorry peeps for the double post.

amdnivram · 05-07-2009, 03:39 PM

im looking for

Appliance Mesh Rims
(4x114.3/ 14x7 / 4.5' backspace/

on a sil80, or a s13 in general.

an example of the rim

04-29-2009, 04:13 PM	#3782
Icy13 Zilvia Junkie Join Date: Mar 2008 Location: San Francisco, CA Posts: 308 Trader Rating: (5) Rides Gallery: Icy13 Feedback Score: 5 reviews	Need some s14 kouki headlight measurments If someone could please run out to their Kouki and snap a few pics of the headlights with a tape measure next to the indicated critical points (A-E) I would be immensely pleased: Incidentally, "B" is located at the point where the headlight meets the corner light. Also, a pic of the hood popped and a tape measure near the cavity behind the front where the headlight sits would be greet (i.e. the depth of the headlight into the body). I need this information to complete my kouki conversion as I wish to do a custom lighting setup and I need to know what size lights will work. Thanks for any help anyone can give, Icy Last edited by Icy13; 04-29-2009 at 05:08 PM..

04-29-2009, 05:55 PM	#3783
dued Zilvia Junkie Join Date: Dec 2005 Location: Vista, CA Posts: 450 Trader Rating: (3) Feedback Score: 3 reviews	red navan s14 zenki Hi, Looking for pics of red navan s14 zenki (especially navan front bumper).

04-29-2009, 07:01 PM	#3785
Kasai Join Date: Aug 2002 Location: Plains, PA Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Anyone have pics of the old Enkei S14.5? Used to have a poster of it back in the day, but I can't seem to find any pics atm __________________

04-29-2009, 11:15 PM	#3786
civilized_drifter Zilvia Junkie Join Date: Oct 2006 Location: spring hill, TN Age: 35 Posts: 584 Trader Rating: (0) Feedback Score: 0 reviews	can any one find me a pic of a s13 with 17x9+22 advan sa3r's. im looking to see how flush it sits __________________

05-03-2009, 01:36 AM	#3792
kalypso123 (ノಠ益ಠ)ノ彡 Join Date: Apr 2008 Location: New York, NY Posts: 2,853 Trader Rating: (2) Feedback Score: 2 reviews	anyone using this bumper? on a decent looking s13... proper offset... no wheel gap Last edited by kalypso123; 05-03-2009 at 01:58 AM..

04-30-2009, 02:09 AM	#3787
cured13 Zilvia Addict Join Date: Apr 2008 Location: Almostthere Posts: 719 Trader Rating: (11) Feedback Score: 11 reviews	Pictures of mid-mount intercooler setups on s13 with A/C please!

05-01-2009, 12:13 AM	#3790
ilike2drive21 Zilvia Member Join Date: Sep 2006 Location: Orlando, FL Age: 36 Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	good pics of work emitz on s14. i cant find any

05-03-2009, 12:33 AM	#3791
newborn240 Leaky Injector Join Date: May 2008 Location: California, USA Age: 33 Posts: 102 Trader Rating: (0) Feedback Score: 0 reviews	hi i would like to get a close up pic of the paint of this S14. anyone knows what kind of metallic red this is? i want this paint for my car I am serious so pls no BS. i dont wana end up painting it a different color because of YOU

05-03-2009, 05:02 PM	#3793
hegamiz Zilvia Member Join Date: Apr 2006 Location: Bakersfield/SoCal Age: 35 Posts: 270 Trader Rating: (9) Feedback Score: 9 reviews	Requesting more pics of this car, please __________________

05-03-2009, 09:38 PM	#3794
BeasT_MoDe Zilvia Junkie Join Date: Sep 2007 Location: Orange County Posts: 351 Trader Rating: (5) Feedback Score: 5 reviews	s14 preferably kouki w/ 17x10 +12 fno1r-c's all around. w/ aero would be a plus.

05-03-2009, 11:02 PM	#3795
Rawrzies Join Date: Nov 2007 Location: Honolulu Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	VIP dish rims (Euroline DH, SSR Vienna, etc) on an S13 hatch? I've only seen pics w/ S13 coupes and S14s.

05-04-2009, 12:08 AM	#3796
jiggs Zilvia Junkie Join Date: Jul 2006 Location: Hawaii Posts: 379 Trader Rating: (0) Feedback Score: 0 reviews	anybody got pics of a s13 vert with an s15 front with non vented fenders (oem look) __________________ JS4HATERS

05-04-2009, 04:57 PM	#3798
Rawrzies Join Date: Nov 2007 Location: Honolulu Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	^ thanks lol, I also found this pic of a local car I'm still undecided if I should go this route

05-05-2009, 11:54 AM	#3800
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 37 Posts: 4,590 Trader Rating: (33) Feedback Score: 33 reviews	17x9+5 17x9 + 11 anyone have pics of these on the front or rear of a slammed hatch...not sort of slammed...im talking close to rim tuck __________________

05-05-2009, 05:11 PM	#3802
Trutrax Zilvia Member Join Date: Jul 2007 Location: Toronto Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	REQUEST: S14 usdm leather seats AND/OR JDM S14 Leather Seats. I'm wanting to compare them.

05-05-2009, 05:20 PM	#3803
MadMaverick Zilvia Member Join Date: Mar 2006 Location: Central Jerz Posts: 161 Trader Rating: (1) Feedback Score: 1 reviews	REQUEST: Coupe with Autopower Cage and full interior. Basically, I need to see where they cut the plastics to run the rear bars (the ones that go to the rear wheel wells. I only have one set of plastics and dont wanna screw them up!

05-06-2009, 10:45 AM	#3804
NewS13Guy Zilvia Addict Join Date: Jan 2008 Location: Charlotte NC Age: 38 Posts: 667 Trader Rating: (13) Feedback Score: 13 reviews	Request: Fully polished 5Zigen Fn01rc's on a S13 hatch.

05-06-2009, 11:59 PM	#3805
ilike2drive21 Zilvia Member Join Date: Sep 2006 Location: Orlando, FL Age: 36 Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	i want to see pics of a either 215/45/17 or 215/45/17 on 17x9 wheel on a s14. No pancy height want to see it low with about 0 to +10 offset or so. need to know how it will look

05-07-2009, 11:08 AM	#3806
k-love Zilvia Member Join Date: Jul 2008 Location: Maryland Age: 34 Posts: 186 Trader Rating: (1) Feedback Score: 1 reviews	Request: Pictures or even specs on WEDS ALBINO FIN wheels I want to see them on anything, im trying to get an idea of the offset and how they look only picture I can really find right now other than the ones in the ad (and they are on an accord)