*ISIS V2 Tubular Bottom Mount Manifolds - Nissan KA24DE - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drb930 · 03-01-2011, 10:48 PM

What is the difference between the V-1's, and the V-2's?
Does the KA24DE manifold have a flange on the bottom of the manifold, and at the turbo outlet for a turbo mounting bracket like the SR20DET manifold does?
Status on re-stocking?

Thanks,
Dave

Enjuku Racing · 03-02-2011, 07:41 AM

The V2 has slightly thicker wall tubing and has the brushed finish. Both are very nice and we havent had any issues with the V1's or 2's. we have a few V1;s on the shelf if anyone wants a deal on one, just shoot me an email.

thanks
Ken

drb930 · 03-02-2011, 08:44 AM

Quote:

Originally Posted by Enjuku Racing

The V2 has slightly thicker wall tubing and has the brushed finish. Both are very nice and we havent had any issues with the V1's or 2's. we have a few V1;s on the shelf if anyone wants a deal on one, just shoot me an email.

thanks
Ken

Ken,

The rest of the question?

Does the KA24DE manifold have a flange on the bottom of the manifold, and at the turbo outlet for a turbo mounting bracket like the SR20DET manifold does?

Thanks,
Dave

Enjuku Racing · 03-02-2011, 09:05 AM

Dave,

It is a bottom mount manifold setup just like an SR. you would be able to use an SR turbo SR o2 housing and downpipe, etc. Let me know if that helps.

thanks
Ken

Chaluska · 03-04-2011, 08:49 AM

it needs to be asked,

does this require the downpipe to be extended the extra 2-3" like all of the other brands? or can you take a greddy down pipe, and turbo elbow (or isis) and just bolt straight up to the cat, with no cutting and welding needed?

#1 problem with all bottom mount t25 manifolds.

OLDSCHOOLRICER · 03-04-2011, 10:21 AM

Quote:

Originally Posted by Chaluska

it needs to be asked,

does this require the downpipe to be extended the extra 2-3" like all of the other brands? or can you take a greddy down pipe, and turbo elbow (or isis) and just bolt straight up to the cat, with no cutting and welding needed?

#1 problem with all bottom mount t25 manifolds.

^ this. very interested

Enjuku Racing · 03-04-2011, 12:48 PM

Quote:

Originally Posted by Chaluska

it needs to be asked,

does this require the downpipe to be extended the extra 2-3" like all of the other brands? or can you take a greddy down pipe, and turbo elbow (or isis) and just bolt straight up to the cat, with no cutting and welding needed?

#1 problem with all bottom mount t25 manifolds.

Yes, this is the common problem with all KAT setups. we usually just massage the floor board with a hammer to clearance the downpipe. Or you can purcahse the Xcessive KA lowering mounts to help with clearance.

I havent ever done any cuting or welding. Just massaging

)

Thanks
Ken

Chaluska · 03-08-2011, 12:44 PM

Quote:

Originally Posted by Enjuku Racing

... I havent ever done any cuting or welding. Just massaging

Massaging is always fun! but you would have to massage the crap out of the floor board in order to fit a downpipe without rubbing

If you are teamed up with isis, maybe isis needs to make a extended downpipe to clear those setups.. it cant be that much harder to extend the jig 2", and you would immediately control the market in "true bolt on t25 setups" If i had the connection, i would make it happen

none the less, i do love the isis v2 manifold.. it looks sick!

Enjuku Racing · 03-08-2011, 12:48 PM

Yea, we have talked with them about it. They are considering doing it, but the problem is for cost to be down they have to build like a billion of something and i dont know if we would be able to move a billion of them

)

180sxdrifter · 03-16-2011, 12:13 PM

is this in stock?

EnjukuBG · 03-16-2011, 12:17 PM

They're still back order right now. They're about 2 weeks out. Shoot me an email at [email protected] if you want a pre-order special deal.

hellion240sx · 04-08-2011, 10:08 AM

guessing that will be version 3 huh?

I will wait for that! I just got a bunch of parts from enjuku! so saving up for the version 3 will probably be right on time.

EnjukuBG · 04-08-2011, 10:12 AM

No sir, still version 2's, and they're back on the shelf now! Order up ladies and gents.

180sxdrifter · 04-08-2011, 11:36 AM

ordered =)

GroundPerformance · 11-03-2011, 03:29 PM

Need a favor. Need someone to end this debate as this kid swears that what he sold me still is this same kind of manifold. LOL I've used this manifold so many time and know what its quality is. Thanks in advance!

http://zilvia.net/f/private-sellers/...ted-240-a.html

nickkaplz · 05-24-2012, 01:05 PM

has anyone done a review of this product yet or posted up photos of one installed so i can see fitment? ive already ordered one and i will do a review i just wanted to see what other people who have used it said before i installed it.

03-02-2011, 07:41 AM	#32
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	The V2 has slightly thicker wall tubing and has the brushed finish. Both are very nice and we havent had any issues with the V1's or 2's. we have a few V1;s on the shelf if anyone wants a deal on one, just shoot me an email. thanks Ken __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

03-02-2011, 09:05 AM	#34
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	Dave, It is a bottom mount manifold setup just like an SR. you would be able to use an SR turbo SR o2 housing and downpipe, etc. Let me know if that helps. thanks Ken __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

03-08-2011, 12:48 PM	#39
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	Yea, we have talked with them about it. They are considering doing it, but the problem is for cost to be down they have to build like a billion of something and i dont know if we would be able to move a billion of them ) __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

03-16-2011, 12:13 PM	#40
180sxdrifter Zilvia Addict Join Date: Mar 2003 Location: NYC Age: 40 Posts: 685 Trader Rating: (20) Feedback Score: 20 reviews	is this in stock? __________________ Instagram @ikigai.no.jinsei

03-16-2011, 12:17 PM	#41
EnjukuBG Zilvia Member Join Date: Jul 2009 Location: LA Age: 37 Posts: 186 Trader Rating: (0) Feedback Score: 0 reviews	They're still back order right now. They're about 2 weeks out. Shoot me an email at [email protected] if you want a pre-order special deal. __________________ V8 RX7

03-01-2011, 10:48 PM	#31
drb930 Zilvia Member Join Date: Oct 2009 Location: Los Angeles Posts: 204 Trader Rating: (0) Feedback Score: 0 reviews	What is the difference between the V-1's, and the V-2's? Does the KA24DE manifold have a flange on the bottom of the manifold, and at the turbo outlet for a turbo mounting bracket like the SR20DET manifold does? Status on re-stocking? Thanks, Dave

03-04-2011, 08:49 AM	#35
Chaluska Zilvia Addict Join Date: May 2008 Location: Missouri City, TX Age: 40 Posts: 997 Trader Rating: (2) Feedback Score: 2 reviews	it needs to be asked, does this require the downpipe to be extended the extra 2-3" like all of the other brands? or can you take a greddy down pipe, and turbo elbow (or isis) and just bolt straight up to the cat, with no cutting and welding needed? #1 problem with all bottom mount t25 manifolds.

04-08-2011, 10:08 AM	#42
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 42 Posts: 1,514 Trader Rating: (0) Feedback Score: 0 reviews	guessing that will be version 3 huh? I will wait for that! I just got a bunch of parts from enjuku! so saving up for the version 3 will probably be right on time. __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict

04-08-2011, 10:12 AM	#43
EnjukuBG Zilvia Member Join Date: Jul 2009 Location: LA Age: 37 Posts: 186 Trader Rating: (0) Feedback Score: 0 reviews	No sir, still version 2's, and they're back on the shelf now! Order up ladies and gents. __________________ V8 RX7

04-08-2011, 11:36 AM	#44
180sxdrifter Zilvia Addict Join Date: Mar 2003 Location: NYC Age: 40 Posts: 685 Trader Rating: (20) Feedback Score: 20 reviews	ordered =) __________________ Instagram @ikigai.no.jinsei Last edited by 180sxdrifter; 04-08-2011 at 03:07 PM..

11-03-2011, 03:29 PM	#45
GroundPerformance Zilvia FREAK! Join Date: Oct 2008 Location: Socal Posts: 1,479 Trader Rating: (44) Feedback Score: 44 reviews	Need a favor. Need someone to end this debate as this kid swears that what he sold me still is this same kind of manifold. LOL I've used this manifold so many time and know what its quality is. Thanks in advance! http://zilvia.net/f/private-sellers/...ted-240-a.html __________________ SoCal KA24DET/KA24ET Owners << Join the FB Group >>

05-24-2012, 01:05 PM	#46
nickkaplz Leaky Injector Join Date: Aug 2011 Location: Alabama Age: 30 Posts: 101 Trader Rating: (1) Feedback Score: 1 reviews	has anyone done a review of this product yet or posted up photos of one installed so i can see fitment? ive already ordered one and i will do a review i just wanted to see what other people who have used it said before i installed it.