This is the interior thread

[rawgarage]

Hahaha I thought I was the only one who thought knee pads would be a space costly thing

[speedfiend]

Originally Posted by WPN-X7

Curious where you relocated the air con cluster/controls to. Just tucked over into glove box?

Im in the process of making a trio of old school omori gauges fit in my s14 and this looks like a sweet way to do it

Im not running A/C or heat so the controls have been deleted entirely. I have seen plenty of people relocate them to the center console though. Just involves lengthening the wiring to that location.
Cameron

[SidewaysTaco]

Originally Posted by Kamycakes

[url=https://flic.kr/p/QFweNX]

what brand mats?

[shaggy sr]

Originally Posted by ehhhregartless

holy shit. more pics please

[Hoffman5982]

Originally Posted by ADIDASilvias

Nice work on that. Hopefully in the next few months I will be able to add my dash into the mix. I am using an Arduino (haven't decided which, most likely a Mega, but considering the Due as well) with at least a single 7" touch enabled screen and a smaller screen or possibly 2 depending on how much room I have left on the dash. I'll be using an Arduino Shield and the CANBUS signals from my Link GTTLink to display realtime data on the dash for everything. My thoughts are that I can display all relevant information on the dash at one time, with the option to switch the smaller screens at the touch of a digital button and display ancillary systems on the fly.

The screens are industrial units with logic chips embedded to handle the display output, so they will handle the extreme temps of the interior without blacking out like a tablet or laptop will in the middle of summer.

This was just using an arduino nano, nothing special. Unfortunately it crapped out pretty quickly. Hopefully it is just a wiring issue but if not I may upgrade to the mega. Right now it is just showing speed but i'm about to start adding code to add in coolant and oil temp. I'll be running nismotronic soon and plan to have my boost, wideband, and oil pressure run off of that to tunerview, which I will have either on my phone or on a tablet during events or hard driving. I don't like the look of gauges, hate pillar pods, and don't want to get rid of my vents, so that seems like the most logical setup.

[Agamemnon]

Originally Posted by shaggy sr

holy shit. more pics please

http://engineeredtoslide.com/

[MamangSorbetero]

Got things a bit tidier today

[ka-titties]

Anyone have suggestions on a low-key, single din head unit? I'd prefer something without all the colors and flashiness of the standard aftermarket head unit.

[LoSt180]

I picked up a full leather interior for my S14. The driver's side bolster has a good sized hole and top edge of the back seat is sun damaged and cracking.

Does anyone have any experience or suggestions for repairing or replacing upholstery?

[YOSHIKOUKI]

Originally Posted by LoSt180

I picked up a full leather interior for my S14. The driver's side bolster has a good sized hole and top edge of the back seat is sun damaged and cracking.

Does anyone have any experience or suggestions for repairing or replacing upholstery?

Clean wat car did the seats come out of

Sent from my SM-N900T using Tapatalk

[slamburger]

Originally Posted by slamburger

Originally Posted by ka-titties

Anyone have suggestions on a low-key, single din head unit? I'd prefer something without all the colors and flashiness of the standard aftermarket head unit.

Here is my interior. Alpine head unit. Single din type. iPod connection. pretty basic but gets the job done and doesnt do a light show for me as i drive down the freeway.

[LoSt180]

Originally Posted by YOSHIKOUKI

Clean wat car did the seats come out of

Came out of an S14. My car currently has regular cloth Kouki seats.

[YOSHIKOUKI]

Originally Posted by LoSt180

Came out of an S14. My car currently has regular cloth Kouki seats.

So those are s14 seats just reconditioned with leather

Sent from my SM-N900T using Tapatalk

[LoSt180]

Originally Posted by YOSHIKOUKI

So those are s14 seats just reconditioned with leather

No, they're factory S14 leather seats. The driver's seat has a hole in it, so I was asking if anyone had experience repairing leather interior.

Want to get it repaired before I actually install them in my car.

Here's another angle.

[dorkidori_s13]

take it to an automotive/boat upholstery shop... will probably cost you $40-$50 to have fixed.

[ka-titties]

Originally Posted by slamburger

Here is my interior. Alpine head unit. Single din type. iPod connection. pretty basic but gets the job done and doesnt do a light show for me as i drive down the freeway.

That's very similar to what I currently have. No bueno.
Thanks for the suggestion though.

[MamangSorbetero]

Originally Posted by ka-titties

Anyone have suggestions on a low-key, single din head unit? I'd prefer something without all the colors and flashiness of the standard aftermarket head unit.

You'd be hard-pressed to find something that isn't still stuck in the 90's way of styling, because they are, indeed, mostly 90's technology.

But what I have seen that are good are Alpines which are very basic in terms of lighting and most of Clarion. I tend to go for the ones with less-protruding buttons or too many lights.

[LoSt180]

Originally Posted by ka-titties

That's very similar to what I currently have. No bueno.
Thanks for the suggestion though.

I have a Pioneer DEH-6000BT. Very simple, yet has Bluetooth and USB port. No million buttons and light show.

Set button color to white and it matches interior. It's blue in this pic, but can set to almost any color you want.



Clean and simple interior:

[5280VertDET]

Originally Posted by ka-titties

Anyone have suggestions on a low-key, single din head unit? I'd prefer something without all the colors and flashiness of the standard aftermarket head unit.

http://www.ebay.com/itm/Nakamichi-CD...QAAOSw241Yk6Wz

http://www.ebay.com/itm/5331-ECLIPSE...0AAOSwopRYmpof

http://www.ebay.com/itm/Rare-NAKAMIC...YAAOSwal5YFUxy

http://www.ebay.com/itm/NAKAMICHI-CD...0AAOSw4A5Yn3qF


http://www.ebay.com/itm/DENON-DCT-R1...AAAOSwiONYMbzH

http://www.ebay.com/itm/Rare-Mcintos...sAAOSwt5hYcZJ3

[ka-titties]

Thanks everyone for the suggestions!

[Hoffman5982]

Got my P2M mats in today, couldn't be happier with them. I'm glad I went with the S14 mats

[slamburger]

Any particular reason you went S14? Looks cool!!! ^^^^

[dread]

Does anyone know if those P2M mats fit an S15?

[Agamemnon]

Originally Posted by slamburger

Any particular reason you went S14? Looks cool!!! ^^^^

S14 fits over the floor hump on the driver side I believe.

[ka-titties]

Here's some shots of my S13 interior. Its a work in progress. Did new, aftermarket carpet, floor mats, shift boot, new OEM ash tray, and repaired the HUD. LED's throughout, including the cluster. I want to change the Nardi woodgrain I got for a leather version. So if anyone is looking for a woodgrain Nardi classic, let me know. Also need to get the HVAC lights back to working again. If anyone has a link to that write-up, post please!

[rawgarage]

^just have IHateMySilvia redo it

[Hoffman5982]

Originally Posted by slamburger

Any particular reason you went S14? Looks cool!!! ^^^^

Originally Posted by Agamemnon

S14 fits over the floor hump on the driver side I believe.

What he said^^ My carpet at a small tear on the hump that the s13 ones wouldn't have covered because it's cut around it. Even if my carpet was pristine, I don't like the look of it being cut around the hump. The s14 ones fit perfect, even the hole for the hook that holds them in place is in the same location.

Originally Posted by ka-titties

I dig the orange. Good job

[tgd89]

Anyone know of other multi gauge options besides a plx dm-100? Seems like Greddy used to make one that's discontinued...

[di-devol]

Originally Posted by ka-titties

Here's some shots of my S13 interior. Its a work in progress. Did new, aftermarket carpet, floor mats, shift boot, new OEM ash tray, and repaired the HUD.

What aftermarket carpet did you go with?

[ka-titties]

Originally Posted by di-devol

What aftermarket carpet did you go with?

Stockinteriors.com part number 3131 with the ultra-plus cut pile and mass backing.