High angel modified knuckles for 240sx

[Silver Mine Motors]

Silver Mine Motors has just started selling high angle knuckles for the 240sx. We are giving all Zilvia members a discount! $200 plus core ($75) for a pair of knuckles. PM, call or email me for special pricing. (818) 636-2797 [email protected]





Here is an installation video
MODIFIED KNUCKLE INSTALLATION 240SX SILVER MINE MOTORS EVAN VHADAT - YouTube


Description:
High angle knuckles for your 240sx. These knuckles allow you to turn your wheels to the maximum angle without over centering your tie rods. After months of test fabrication and research and development we at Silver mine Motors have come up with the winning formula! These knuckles have been tested and proven at drift events, and on our shop car. They will allow you to turn your front wheels much farther than any other modified knuckle. Drop tie rod pickups move your tie rod angle lower so they are more parallel to your lower control arms. Shortened tie rod arms make for faster responsiveness to slight movements of the steering wheel, as well as turning your wheels to an angle you never though possible! Months of testing ensures that these knuckles are modified so that they will not over center during full lock turns. Mig welded 3 times over by our certified professional automotive welder with 25 years’ experience in fabrication! Cleaned and painted with thick high gloss paint. Note: you will need to use longer inner and out tie rods with these knuckles. We recommend 1998 240sx S14 inner and 1989-1990 Nissan Maxima outer tie rods. Installation takes only 2 hours. Silver Mine Motors does not take any responsibility for any accidents/ losses caused by or in conjunction with these parts, or any other race parts we sell. Buyer assumes all risk when operating a vehicle with modified parts.

[gallo]

Lets do a group buy anyone interested?

[Blue91hatch]

I'd be In on a group buy pm me if you get something started

[Silver Mine Motors]

If 5 or more people are in for a group buy then price is $135 plus cores.
reply if your in.

[WOOTEN]

I'm interested, when are we talking about making this happen

Sent from my DROID RAZR HD using Tapatalk

[LMFC]

Are these only available for s13?

[Silver Mine Motors]

Yes we have them for the S14 as well. They are already modified and ready to ship!

Seems like we have 3 people so far.

LMFC - Are you in, we have them for the S14 as well.

Just two more people.

[LMFC]

I'm in for s14

[Silver Mine Motors]

OK 4 people are in. We just need 1 more!

[WOOTEN]

Bump for awesomeness

Sent from my DROID RAZR HD using Tapatalk

[jmac636]

I'm in at $135. PayPal ready!

[WOOTEN]

That's five....

Sent from my DROID RAZR HD using Tapatalk

[Silver Mine Motors]

OK we have five people for the group buy. I have setup a listing on our website for $135 plus cores, or core fee. If you want to send your cores in after you install the modified knuckles then pay the core fee and we'll refund you after we receive your cores. If you don't want to pay the core fee then order at $135 and we will ship out your modified knuckles once we receive your cores.
Here is the link to the listing. It will only be active for 2 days, so everyone has to order today or tomorrow. We can't start shipping anything until all five of you order.

http://www.silverminemotors.com/niss...es-for-s13-146

Let me know if you have any other questions.
Edan

[BiG MiKE86]

I have S14 knuckles on my S13 - which option should I pick? What tie rods are recommended with these knuckles?

[Silver Mine Motors]

If you have S14 knuckles then I'm assuming you have S14 hubs as well. In that case I would choose S14.
we recommend S14 inner tie rods and 89-90 Nissan Maxima outer tie rods. or Tein inner with SPL outers.

[WOOTEN]

Sweet!!!!

Sent from my DROID RAZR HD using Tapatalk

[Maiku240sxS14]

Where are you located? No where on your website has a location, just a Phone Number and Email addy.

[Blue91hatch]

I'm curious as to how we pay the 135 and ship you ours, is there a shipping label we can print off? i haven't looked at that link yet but planning on sending the money tonight

[Silver Mine Motors]

we can meet in Reseda ca. 91335 for local pickup just call me to setup a time. Also there has to be 4 other people in the group buy before I can send out any knuckles.

There is a no label I can send you. You would just have to send them to me, just ask me for the address once you place your order.

[negativejason]

Can I still get in on the group buy?

Sent from my SGH-M919 using Tapatalk

[WOOTEN]

Yes you can, click that link above and place your order good sir

Sent from my DROID RAZR HD using Tapatalk

[WOOTEN]

We need at lease 5 to actually purchase to make it happen...

Sent from my DROID RAZR HD using Tapatalk

[negativejason]

Will the maxima outers be enough if I remove my bump stops?

Sent from my SGH-M919 using Tapatalk

[WOOTEN]

Good question... I'm sure bajaracer will have the answer!

Sent from my DROID RAZR HD using Tapatalk

[Silver Mine Motors]

You will get more angle than with stock tie rods, but if you get the s14 inners you will get even more angle. If you remove/ modify the bump stop then you will get even more angle. The more you do, the more angle you will get. But yes you can start with the maxima outers, and go from there.

[Blue91hatch]

Just made the order, let's get the rest of em!!!

[Silver Mine Motors]

We have 2 people paid so far. We nee 5 or more. Let's go!

[Silver Mine Motors]

Here are some more pictures after we trimmed the bump stops. If we want more angle than this we will move the rack and pinion forward with our high angle cross member.

[WOOTEN]

What that last pic of?

Sent from my DROID RAZR HD using Tapatalk

[Rak123]

Originally Posted by WOOTEN

What that last pic of?

Sent from my DROID RAZR HD using Tapatalk

I would guess it is a high angle cross member