My Project SR 56K BEWARE!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

prang11 · 03-06-2008, 08:05 PM

Some serious dedication to rip that motor apart, send it home, and put it all back together. +rep

Sileighty_85 · 03-06-2008, 08:19 PM

I found Some Install Pics,
I dropped in the engine and had it running and DD on Day 2 with no problems

SAY AHHH...

A New life Begins

Dont worry the Blue Silicone hoses are removed, and I know it was a big mistake to use'em

Sileighty_85 · 03-14-2008, 08:54 AM

New Update

Battle Version Suspension Arm Kit installed

Finally Came in After 3 Weeks, (Not Because of Alex) Due to my parts Supplier

Install was easy, I did the rear with out a lift, but brought in to my buddys shop to install the front

I know my Subframe and chassis is nasty that will be my next project to clean lol

Colorful lol

The feeling is awsome! rear end control is soo much more responisve.
When the rear slides out it is sooo smooth compared to before >.<

Nismo Power Brace got for $150 shipped New

New Koyo Aluminium Rad. $285 Shipped

Sileighty_85 · 03-14-2008, 09:56 AM

found some Pics from My 5 Lug swap

sucks I didnt have a pic for the beggining half

I was using the Whole S14 Hub assembly everything was cake until I had to remove the lower Ball joint, That thing was a bitch, I was beating the shit out of it with a hammer for almost 2 hours (on each side) until they came out.

Left Side Finished

Stock S13 Top Z32 30mm Bottom

Installing the S14 Lower Ball joints
I didnt have much to work with so I had to make shift a ball joint puller to install them it it worked great!

Sex

ESone3 · 03-14-2008, 10:29 AM

Looks like fun. I'm back on my project from my winter hiatus.

good jorb!

hstylez · 03-14-2008, 10:40 AM

Came a long way man. Nice build!

allntrlundrgrnd · 03-14-2008, 10:43 AM

sweet work man, clean ass sr

boosted98gst · 03-14-2008, 12:09 PM

I miss okinawa, I can not wait to go back and see my family this summer for oban.

Sileighty_85 · 05-03-2008, 11:06 PM

So the Cusco's I picked up in Oki Die'd along time ago Probably a few weeks after haven them on the car lol

So i had to convince my self to buy some new ones
So i decied to go with the Stance GR+ Pro's

Very Nice Coils Im very happy with them,
but no track time yet but im hopin soon

NismoLmgt4 · 05-04-2008, 12:11 AM

is that a greddy type LS fmic?

818_99G20 · 05-04-2008, 12:26 AM

WOW great build up. That is some true dedication right there. Your ride is coming along very well.

I need to take a trip to japan and go on a shopping spree, and bring me a 20V SR20VET motor or SR16VE N1 Motor and a T4 AWD system from a nissan primera.

Do you have any pics of the rod bearings installation

Sileighty_85 · 05-04-2008, 12:27 PM

Quote:

Originally Posted by NismoLmgt4

is that a greddy type LS fmic?

ummm tell ya the truth I cant remember the model, it was the best one at the time

Quote:

Originally Posted by 818_99G20

WOW great build up. That is some true dedication right there. Your ride is coming along very well.

I need to take a trip to japan and go on a shopping spree, and bring me a 20V SR20VET motor or SR16VE N1 Motor and a T4 AWD system from a nissan primera.

Do you have any pics of the rod bearings installation

Thanks ^_^ expect to pay a butt load if using the Japanese Postal Service to ship stuff home.
If your Military and close to a base its alot cheaper to ship from there.

no real in depth pics of the Bearing install other than these

Sileighty_85 · 05-27-2008, 05:48 PM

New Update My Split Fire Ignition System came in today ^_^
Installation was Quick and easy Fires right up first time
RPM's actually increased by 150-200. Idle's at a steady 900RPMS

Only drove it for 10 mins so far
RPM's are more stable, With A/C RPM's recover quckier, RPM transition to Idle after driving is steady and smooth (might fix the bogging stall some of yall have when going to neutral)

Firestorm · 05-27-2008, 07:02 PM

i see you run S14 rucas...did you buy those on purpose?

s13 @ fullboost · 05-27-2008, 10:33 PM

Man I love it, Great job =]

redrums13 · 05-27-2008, 10:45 PM

nice work! looks like its comming along!

Sileighty_85 · 05-28-2008, 02:52 PM

Quote:

Originally Posted by Firestorm

i see you run S14 rucas...did you buy those on purpose?

Its the Full S13 Kit.

Sileighty_85 · 06-17-2008, 11:17 PM

So Finally after a year i get a body kit for my bumperless S13.
I dont normally care about looks until after the engine and suspension is finished.
Only waiting on Injectors, Cam's and my PFC tune

But I'm tired of driving around bumperless

Anyway it was kinda cool I first ordered the Version Select Version 3 kit just cuz it cheaper and its my Drift car. Ive ordered alot of parts from them so they gave me a discount on my order.
But got an Email a day later saying they are out of stock of the Version 3 kit and that they will upgrade to the Origin Agressive Kit for FREE.
So that was kinda cool of them.

Finally got it today!!
Took long enough to do so, it took a month after ordering it for it to get here.

Depending on weather I'll be installing them this weekend.

I wanna fab up a rear bumper support and incorperate a jacking point in to it so If I come up with somthing good I'll post pics

Gjohnson7 · 06-18-2008, 05:50 PM

Nice. Keep the pics coming.

Entry Speed · 06-18-2008, 06:01 PM

^^^ x2 keep the pics coming, awesome build!!!

Love that you parted it to send it over

clark · 06-18-2008, 06:10 PM

lol whenever i've seen pics of your car around the forum and in your sig and stuff and through various lurkings, i was always like damn, he built up his engine, susp, and brakes, i wonder if he's ever gonna get a bumper

hooray! please take some detailed shots so you can update your thread. noone really takes details of the modifications they do when fitting a kit. i'll be subscribing so do it this weekend!

Modrified · 06-18-2008, 06:42 PM

it's coming along great. keep the pics coming.

ms!3 · 06-18-2008, 06:53 PM

lol, i never thought id see you car with a front bumper. Call me or something during the install.

corriganjoshua · 06-18-2008, 06:56 PM

Nice job on build!

Sileighty_85 · 06-18-2008, 07:20 PM

Thanks Everyone If it not raining this weekend I'm gonna start the install

Im wanting to paint and wet sand the Aero Blue Since that will be the final color for the car.
So hopefully i'll have the patience to do it and it not take forever lol so the car might be black and blue for a while lol.

I gotta get the car to a frame shop to get the front end pulled up, Upper core support and front end is pushed about an inch or so down -o- I just hope the front bumper doesnt sit too low

Quote:

Originally Posted by MS!3

lol, i never thought id see you car with a front bumper. Call me or something during the install.

Well I tried calling you today I wanted to ask you kinda paint and supplys you used when you did yours

A Spec Products · 06-18-2008, 07:25 PM

Quote:

Originally Posted by Firestorm

i see you run S14 rucas...did you buy those on purpose?

S14 works on either S13 or 14

Battle Version only makes the S14 design since obviously he only has to make one version to support 2 cars

I wouldn't mind the S14 version once in a while, cause stupid S13 full circle design makes it hard to adjust lower coilover perch sometimes haha

But yeah if a manufacturer made a S13 and S14 version and I had a S13, obviously get S13 first, but for Battle Version it works on both so all good

Quote:

Originally Posted by Sileighty_85

I wanna fab up a rear bumper support and incorperate a jacking point in to it so If I come up with somthing good I'll post pics

Why don't you just use a stock rear bumper support?

Then just jack from tow hook?

Sileighty_85 · 06-18-2008, 07:37 PM

Quote:

Originally Posted by A Spec Products

Why don't you just use a stock rear bumper support?

Then just jack from tow hook?

I do that now, but with the aero on I believe It covers the tow hook

So I was thinking modifying the rear bumper support and welding a 2 in square tubing to the support in the middle So I can jack it from there without doing the 2x4 thing.

But I've never seen the design of the rear bumper support so I need to take it off and take a look
So im not sure if its possible

aa87 · 06-18-2008, 08:32 PM

Team Julius did it!

They have that bar that replaces the rear bumper support and has a jacking point.

Knumb Chucks · 06-18-2008, 09:45 PM

nice build and thanks for uploading pics to show us your build

Sileighty_85 · 06-19-2008, 03:40 PM

Heres a test fit for ya'll

Fitment for the front end seems to be perfect

Yes the driverside is lower than the passenger side, the front is tweaked a little bit, but most of the reason is the bumper is catchin on the intercooler pipe (No Biggie) I bought a new upper core support I need to take it to a shop and get it pulled up and welded up

I'll do the rear bumper this weekend, and Maybe start painting it today? I'm not sure

So its catchin on the intercooler piping so i marked it to when I need to notch it

Used my handy dany Dremel to noch away at the bumper

What do ya'll think should I begin painting the Kit Blue and wet sand it since that will be the ending color, or just paint it black??? It might be black and blue for a while though, and its my DD

I did a little bit of the front bumper to see how it would turn out, Im still on the fence about it
I'm trying to go for the GTR Blue, so far it looks ok, pretty glossy for just one coat I think with a little wet sanding it will look pretty good?

03-06-2008, 08:19 PM	#32
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	I found Some Install Pics, I dropped in the engine and had it running and DD on Day 2 with no problems SAY AHHH... A New life Begins Dont worry the Blue Silicone hoses are removed, and I know it was a big mistake to use'em __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-14-2008, 08:54 AM	#33
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	New Update Battle Version Suspension Arm Kit installed Finally Came in After 3 Weeks, (Not Because of Alex) Due to my parts Supplier Install was easy, I did the rear with out a lift, but brought in to my buddys shop to install the front I know my Subframe and chassis is nasty that will be my next project to clean lol Colorful lol The feeling is awsome! rear end control is soo much more responisve. When the rear slides out it is sooo smooth compared to before >.< Nismo Power Brace got for $150 shipped New New Koyo Aluminium Rad. $285 Shipped __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-14-2008, 09:56 AM	#34
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	found some Pics from My 5 Lug swap sucks I didnt have a pic for the beggining half I was using the Whole S14 Hub assembly everything was cake until I had to remove the lower Ball joint, That thing was a bitch, I was beating the shit out of it with a hammer for almost 2 hours (on each side) until they came out. Left Side Finished Stock S13 Top Z32 30mm Bottom Installing the S14 Lower Ball joints I didnt have much to work with so I had to make shift a ball joint puller to install them it it worked great! Sex __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

03-14-2008, 10:29 AM	#35
ESone3 Zilvia.net Advertiser Join Date: Oct 2005 Location: Chicago Posts: 1,376 Trader Rating: (15) Feedback Score: 15 reviews	Looks like fun. I'm back on my project from my winter hiatus. good jorb! __________________ www.illgarage.com

03-14-2008, 10:40 AM	#36
hstylez Zilvia Member Join Date: Mar 2006 Location: Ohio Posts: 253 Trader Rating: (4) Feedback Score: 4 reviews	Came a long way man. Nice build! __________________ S13 Coupe SR20DET

03-06-2008, 08:05 PM	#31
prang11 Zilvia Member Join Date: Dec 2006 Location: Oregon Posts: 218 Trader Rating: (4) Feedback Score: 4 reviews	Some serious dedication to rip that motor apart, send it home, and put it all back together. +rep

03-14-2008, 10:43 AM	#37
allntrlundrgrnd Nissanaholic! Join Date: Jul 2007 Location: Portland, OR Posts: 2,481 Trader Rating: (17) Rides Gallery: allntrlundrgrnd Feedback Score: 17 reviews	sweet work man, clean ass sr __________________ https://www.instagram.com/kook_180sx

03-14-2008, 12:09 PM	#38
boosted98gst Zilvia Junkie Join Date: May 2006 Location: oceanside Age: 41 Posts: 389 Trader Rating: (3) Feedback Score: 3 reviews	I miss okinawa, I can not wait to go back and see my family this summer for oban.

05-03-2008, 11:06 PM	#39
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	So the Cusco's I picked up in Oki Die'd along time ago Probably a few weeks after haven them on the car lol So i had to convince my self to buy some new ones So i decied to go with the Stance GR+ Pro's Very Nice Coils Im very happy with them, but no track time yet but im hopin soon __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

05-04-2008, 12:11 AM	#40
NismoLmgt4 Leaky Injector Join Date: Jul 2004 Location: canada Posts: 71 Trader Rating: (0) Feedback Score: 0 reviews	is that a greddy type LS fmic?

05-04-2008, 12:26 AM	#41
818_99G20 Leaky Injector Join Date: Jan 2007 Location: Sherman Oaks, CA Age: 37 Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	WOW great build up. That is some true dedication right there. Your ride is coming along very well. I need to take a trip to japan and go on a shopping spree, and bring me a 20V SR20VET motor or SR16VE N1 Motor and a T4 AWD system from a nissan primera. Do you have any pics of the rod bearings installation __________________ SoCalG20\|SR20DE+T W10 Setup will be ready soon.

05-27-2008, 05:48 PM	#43
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	New Update My Split Fire Ignition System came in today ^_^ Installation was Quick and easy Fires right up first time RPM's actually increased by 150-200. Idle's at a steady 900RPMS Only drove it for 10 mins so far RPM's are more stable, With A/C RPM's recover quckier, RPM transition to Idle after driving is steady and smooth (might fix the bogging stall some of yall have when going to neutral) __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

05-27-2008, 07:02 PM	#44
Firestorm Zilvia Junkie Join Date: Sep 2007 Location: Germany Age: 37 Posts: 371 Trader Rating: (0) Feedback Score: 0 reviews	i see you run S14 rucas...did you buy those on purpose?

05-27-2008, 10:33 PM	#45
s13 @ fullboost Post Whore! Join Date: Dec 2007 Location: St.Petersburg,FL Posts: 2,549 Trader Rating: (15) Feedback Score: 15 reviews	Man I love it, Great job =] __________________

05-27-2008, 10:45 PM	#46
redrums13 Join Date: May 2008 Location: Northridge, CA Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	nice work! looks like its comming along!

06-17-2008, 11:17 PM	#48
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	So Finally after a year i get a body kit for my bumperless S13. I dont normally care about looks until after the engine and suspension is finished. Only waiting on Injectors, Cam's and my PFC tune But I'm tired of driving around bumperless Anyway it was kinda cool I first ordered the Version Select Version 3 kit just cuz it cheaper and its my Drift car. Ive ordered alot of parts from them so they gave me a discount on my order. But got an Email a day later saying they are out of stock of the Version 3 kit and that they will upgrade to the Origin Agressive Kit for FREE. So that was kinda cool of them. Finally got it today!! Took long enough to do so, it took a month after ordering it for it to get here. Depending on weather I'll be installing them this weekend. I wanna fab up a rear bumper support and incorperate a jacking point in to it so If I come up with somthing good I'll post pics __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

06-18-2008, 05:50 PM	#49
Gjohnson7 Zilvia Addict Join Date: Mar 2004 Location: Broken Arrow, OK Age: 43 Posts: 980 Trader Rating: (7) Feedback Score: 7 reviews	Nice. Keep the pics coming. __________________ LSX Kouki Project, swap completed in Dec 09

06-18-2008, 06:01 PM	#50
Entry Speed Leaky Injector Join Date: Aug 2007 Location: Miami Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	^^^ x2 keep the pics coming, awesome build!!! Love that you parted it to send it over

06-18-2008, 06:10 PM	#51
clark Zilvia FREAK! Join Date: Mar 2008 Location: new york Posts: 1,035 Trader Rating: (1) Feedback Score: 1 reviews	lol whenever i've seen pics of your car around the forum and in your sig and stuff and through various lurkings, i was always like damn, he built up his engine, susp, and brakes, i wonder if he's ever gonna get a bumper hooray! please take some detailed shots so you can update your thread. noone really takes details of the modifications they do when fitting a kit. i'll be subscribing so do it this weekend!

06-18-2008, 06:42 PM	#52
Modrified Zilvia Member Join Date: Jan 2008 Location: n/a Posts: 245 Trader Rating: (0) Feedback Score: 0 reviews	it's coming along great. keep the pics coming. __________________ *I CAN FLASH MODIFY YOUR XBOX 360.*

06-18-2008, 06:53 PM	#53
ms!3 Zilvia FREAK! Join Date: Apr 2006 Location: USA Age: 34 Posts: 1,563 Trader Rating: (7) Feedback Score: 7 reviews	lol, i never thought id see you car with a front bumper. Call me or something during the install.

06-18-2008, 06:56 PM	#54
corriganjoshua Zilvia Junkie Join Date: Apr 2007 Location: Wrong End of the Railroad Tracks Posts: 422 Trader Rating: (0) Rides Gallery: corriganjoshua Feedback Score: 0 reviews	Nice job on build! __________________ Team Inertia Cheap,Fast,Reliable you can only have 2.

06-18-2008, 08:32 PM	#58
aa87 Zilvia FREAK! Join Date: May 2003 Location: Shreveport, LA Age: 36 Posts: 1,116 Trader Rating: (1) Feedback Score: 1 reviews	Team Julius did it! They have that bar that replaces the rear bumper support and has a jacking point. __________________ Hookers and blow.

06-18-2008, 09:45 PM	#59
Knumb Chucks Join Date: Jun 2008 Location: Santa Barbara County Age: 34 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	nice build and thanks for uploading pics to show us your build

06-19-2008, 03:40 PM	#60
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Test Fit Teaser Heres a test fit for ya'll Fitment for the front end seems to be perfect Yes the driverside is lower than the passenger side, the front is tweaked a little bit, but most of the reason is the bumper is catchin on the intercooler pipe (No Biggie) I bought a new upper core support I need to take it to a shop and get it pulled up and welded up I'll do the rear bumper this weekend, and Maybe start painting it today? I'm not sure So its catchin on the intercooler piping so i marked it to when I need to notch it Used my handy dany Dremel to noch away at the bumper What do ya'll think should I begin painting the Kit Blue and wet sand it since that will be the ending color, or just paint it black??? It might be black and blue for a while though, and its my DD I did a little bit of the front bumper to see how it would turn out, Im still on the fence about it I'm trying to go for the GTR Blue, so far it looks ok, pretty glossy for just one coat I think with a little wet sanding it will look pretty good? __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit Last edited by Sileighty_85; 06-19-2008 at 06:25 PM..