Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 11-03-2022, 12:06 PM   #1
adictd2b00st
Zilvia Addict
 
Join Date: May 2003
Location: OH
Age: 42
Posts: 695
Trader Rating: (4)
adictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to beholdadictd2b00st is a splendid one to behold
Feedback Score: 4 reviews
Send a message via AIM to adictd2b00st
Harness/ECU combination

Hey all,

So I had started going through the wiring on my s14 (I did not personally do the swap on this one) years ago. It ran but was kinda hacked wiring wise, so I started with ripping out the old and brittle harness. I?d be lying if I said I didn?t forget all the details since then. It?s an S13 red top in an S14 zenki chassis.

Long story short, I want to make sure I get the right ECU for this car. From what I can tell the wiring at the ECU connector on the harness I put in (a second hand WS harness) matches a 62/63 pinout.

I know the wire colors won?t necessarily always match but pin location/function would be best indicator. I made a quick spreadsheet (I tried to snip/attach as a picture but not having any luck) does what I?m seeing seem right? I have empty locations for pins 5, 10/11/12, 24, 26, 28, 33, 42, 44, 45, 102, 105, 111, 114/115.

If you have a good way for me to confirm by, let me know and I?m up for checking it. Been far too long really want to get this thing running again!
adictd2b00st is offline   Reply With Quote
Sponsored Links
Old 11-04-2022, 05:15 AM   #2
OMFGeofffff
Zilvia Member
 
OMFGeofffff's Avatar
 
Join Date: Jan 2010
Location: Minneapolis MN
Age: 34
Posts: 159
Trader Rating: (3)
OMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really niceOMFGeofffff is just really nice
Feedback Score: 3 reviews
https://www.wiringspecialties.com/ecu-pinouts/

Check for continuity on ignition wires from ecu connector to ignitor connector. I believe those are the main differences between 64-pin ecu's.
OMFGeofffff is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net