tires hitting my fender/wheel well - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240Degrees · 01-24-2003, 01:30 AM

when i take a hard turn, especially if the road is bumpy, i can hear my front tire hitting my wheel well. I dropped it with Tein HAs and I dont think its even that low. You can fit 2 fingers in each corner. What can I do to stop this? Will it do the same thing at autox? I've heard of rolling fenders, but I don't kno exactly how to do it.

adey · 01-24-2003, 04:32 AM

you should try to figure out if it's just your mud guard/fender liner or if it's the fender... or if it's the wiring harness underneath the liner on the drivers side... or if it's the tire rubbing the coilovers... or if it's the tires rubbing the "fold" where the apron is joined to the... err.. inner fender? -- you an see this if you take off the fender liner.

Unless you're running very low offset wheels (+5mm or lower) you are probably not rubbing the fender, which leaves the next two most likely as "just" rubbing the fender liner (raise car or get stiffer springs/stiffen dampening), or rubbing the coilover (neeeeed lower offset wheels). If you're rubbing coilover, you're probably running a Honda-offset wheel, i.e. 17x7 +45mm.

If you're "just" rubbing fender liner, check to make sure you're not eating through your wiring harness!

*LanceS13* · 01-24-2003, 09:22 AM

what wheel size and offset and tire size

tnord · 01-24-2003, 12:06 PM

will a moderator please move this into Tech setion........it doesn't belong here.

*LanceS13* · 01-24-2003, 12:13 PM

you're right...got it covered

240Degrees · 01-24-2003, 03:25 PM

My front wheels which are rubbing are stock. I can feel that the tire is real close to the coilover. I'll check later to see what's up like checking the fender lining.

240Degrees · 01-24-2003, 03:29 PM

here's a picture. maybe if there's someone in san diego who can help me out with this?

bbp · 01-24-2003, 07:40 PM

stock wheels will rub with coilovers... buy new wheels or get some spacers.

240Degrees · 01-24-2003, 09:40 PM

how thick of a spacer will i need?

240Degrees · 01-24-2003, 09:47 PM

or how much space should there be between my tire and coilover? There is barely any space right now, but it seems to only be a problem when i take hard turns.

btw, bbp - your sig is quite disturbing but i cant stop watching it loop again and again....

adey · 01-26-2003, 05:33 PM

I don't have problems running stock wheels in front with coilovers, even when taking hard turns. What kind of coilovers do you have?

The only sort of "rubbing" that I get is when I spin, and the wheels are 'pushed' to full lock... something, at that point, seems to get stuck, but I think it's because the tire "rolls" inwards.
Apparently some heavy negative camber will help get rid of this annoying rub/clunk/hitting. Maybe that's what your problem is?

240Degrees · 01-26-2003, 05:56 PM

i have tein HAs. no upper mount. i can feel that there isn't much room between the the coilover/spring and the tire.

I think I'm going to try out a 5mm spacer in the fronts, but it sounds to me the tire sorta bounces up into the under fender thing. The wheel well basically. I set my fronts harder than the rears, but I haven't tested it out much.

Bbandit · 01-26-2003, 06:47 PM

are you sure the tire is rubbing the coilovers?
check your inner fender...
mine rubs the inner fender since the inner fender misses a couple of screws

adey · 01-29-2003, 03:43 AM

my stock steelies with 205/55/15 FM-901s do NOT rub my coilovers (I have about 1/2" of space) and my 16x7 +35 wheels with 205/55/16 tires do NOT rub my coilovers (front) either.

what my 205/55/16 and 16x7 wheels DO rub, though, is the inner fender. At times, it rubs through the inner fender and into that relatively sharp edge/lip of the inner-fender directly above the wheel. You can see this sharp (and unnerving) edge if you take off the fender lining.

My rears are fine now, although I used to rub with my 205/55/15 tires on 15x7 +5 wheels. I have since "rolled" (or rather hammered) my rear quarter panels, and don't have rubbing (tire) problems.

240Degrees · 01-29-2003, 02:57 PM

I think I have less than a half inch of space between the coilover and tire. Also, I haven't gotten an alignment yet. Could that also be why it is so close? I might be cambering a bit?

Dousan_PG · 01-29-2003, 03:25 PM

YES if your car is low you will most likelyhave too muchnegative camber!
get an alignment
DUH
that should be the fIRST thing you do after making suspension changes! WITHOUT question

01-24-2003, 01:30 AM	#1
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	tires hitting my fender/wheel well when i take a hard turn, especially if the road is bumpy, i can hear my front tire hitting my wheel well. I dropped it with Tein HAs and I dont think its even that low. You can fit 2 fingers in each corner. What can I do to stop this? Will it do the same thing at autox? I've heard of rolling fenders, but I don't kno exactly how to do it.

01-24-2003, 04:32 AM	#2
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	you should try to figure out if it's just your mud guard/fender liner or if it's the fender... or if it's the wiring harness underneath the liner on the drivers side... or if it's the tire rubbing the coilovers... or if it's the tires rubbing the "fold" where the apron is joined to the... err.. inner fender? -- you an see this if you take off the fender liner. Unless you're running very low offset wheels (+5mm or lower) you are probably not rubbing the fender, which leaves the next two most likely as "just" rubbing the fender liner (raise car or get stiffer springs/stiffen dampening), or rubbing the coilover (neeeeed lower offset wheels). If you're rubbing coilover, you're probably running a Honda-offset wheel, i.e. 17x7 +45mm. If you're "just" rubbing fender liner, check to make sure you're not eating through your wiring harness! __________________ Instagram: @SX180HKG

01-24-2003, 09:22 AM	#3
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 42 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	what wheel size and offset and tire size __________________ 1992 240SX Fastback #47 DSP MS SCCA RX-7 ITS Project FOR SALE

01-24-2003, 12:13 PM	#5
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 42 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	you're right...got it covered __________________ 1992 240SX Fastback #47 DSP MS SCCA RX-7 ITS Project FOR SALE

01-24-2003, 07:40 PM	#8
bbp Zilvia Junkie Join Date: Apr 2002 Location: oHIo Age: 52 Posts: 477 Trader Rating: (0) Feedback Score: 0 reviews	stock wheels will rub with coilovers... buy new wheels or get some spacers. __________________

01-24-2003, 12:06 PM	#4
tnord Nissanaholic! Join Date: Dec 2001 Posts: 1,975 Trader Rating: (0) Feedback Score: 0 reviews	will a moderator please move this into Tech setion........it doesn't belong here.

01-24-2003, 03:25 PM	#6
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	My front wheels which are rubbing are stock. I can feel that the tire is real close to the coilover. I'll check later to see what's up like checking the fender lining.

01-24-2003, 03:29 PM	#7
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	here's a picture. maybe if there's someone in san diego who can help me out with this?

01-24-2003, 09:40 PM	#9
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	how thick of a spacer will i need?

01-24-2003, 09:47 PM	#10
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	or how much space should there be between my tire and coilover? There is barely any space right now, but it seems to only be a problem when i take hard turns. btw, bbp - your sig is quite disturbing but i cant stop watching it loop again and again....

01-26-2003, 05:33 PM	#11
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	I don't have problems running stock wheels in front with coilovers, even when taking hard turns. What kind of coilovers do you have? The only sort of "rubbing" that I get is when I spin, and the wheels are 'pushed' to full lock... something, at that point, seems to get stuck, but I think it's because the tire "rolls" inwards. Apparently some heavy negative camber will help get rid of this annoying rub/clunk/hitting. Maybe that's what your problem is? __________________ Instagram: @SX180HKG

01-26-2003, 05:56 PM	#12
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	i have tein HAs. no upper mount. i can feel that there isn't much room between the the coilover/spring and the tire. I think I'm going to try out a 5mm spacer in the fronts, but it sounds to me the tire sorta bounces up into the under fender thing. The wheel well basically. I set my fronts harder than the rears, but I haven't tested it out much. Last edited by 240Degrees; 01-26-2003 at 05:59 PM..

01-26-2003, 06:47 PM	#13
Bbandit Post Whore! Join Date: Mar 2002 Location: Texas and now Jakarta Age: 42 Posts: 2,674 Trader Rating: (0) Rides Gallery: Bbandit Feedback Score: 0 reviews	are you sure the tire is rubbing the coilovers? check your inner fender... mine rubs the inner fender since the inner fender misses a couple of screws __________________ ==>>TGL GARAGE<<==.. RIP! S13 coupe KA-T @ 0.5 Bar = SOLD! A31 Cefiro + SR = Current

01-29-2003, 03:43 AM	#14
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,072 Trader Rating: (0) Feedback Score: 0 reviews	my stock steelies with 205/55/15 FM-901s do NOT rub my coilovers (I have about 1/2" of space) and my 16x7 +35 wheels with 205/55/16 tires do NOT rub my coilovers (front) either. what my 205/55/16 and 16x7 wheels DO rub, though, is the inner fender. At times, it rubs through the inner fender and into that relatively sharp edge/lip of the inner-fender directly above the wheel. You can see this sharp (and unnerving) edge if you take off the fender lining. My rears are fine now, although I used to rub with my 205/55/15 tires on 15x7 +5 wheels. I have since "rolled" (or rather hammered) my rear quarter panels, and don't have rubbing (tire) problems. __________________ Instagram: @SX180HKG

01-29-2003, 02:57 PM	#15
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 39 Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	I think I have less than a half inch of space between the coilover and tire. Also, I haven't gotten an alignment yet. Could that also be why it is so close? I might be cambering a bit? __________________ tentacles??? wtf!?

01-29-2003, 03:25 PM	#16
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 45 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	YES if your car is low you will most likelyhave too muchnegative camber! get an alignment DUH that should be the fIRST thing you do after making suspension changes! WITHOUT question __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira