Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 03-03-2014, 07:13 AM   #61
rbs14kouki
Zilvia Addict
 
rbs14kouki's Avatar
 
Join Date: Oct 2007
Location: Montreal , Canada
Age: 37
Posts: 817
Trader Rating: (1)
rbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to all
Feedback Score: 1 reviews
Its a billet lower section with a greddy s14 intake !

http://www.nissansilvia.com/forums/i...tach_id=401137
__________________
AV FABRICATION

Built thread sr20vet s14
http://zilvia.net/f/showthread.php?t=535574
rbs14kouki is offline   Reply With Quote
Sponsored Links
Old 03-03-2014, 11:42 AM   #62
hobbs
Nissanaholic!
 
Join Date: Aug 2010
Location: Under a rock
Posts: 2,264
Trader Rating: (43)
hobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the rough
Feedback Score: 43 reviews
Oh woah, that is fucking awesome!
hobbs is offline   Reply With Quote
Old 03-03-2014, 01:02 PM   #63
krysknowles
Leaky Injector
 
krysknowles's Avatar
 
Join Date: Mar 2006
Location: Florida
Posts: 67
Trader Rating: (1)
krysknowles is an unknown quantity at this point
Feedback Score: 1 reviews
My Old Motor...Miss it a lot :-(


krysknowles is offline   Reply With Quote
Old 03-03-2014, 01:08 PM   #64
SamsonS4
BANNED
 
Join Date: Jan 2014
Location: California love
Age: 43
Posts: 117
Trader Rating: (0)
SamsonS4 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by rbs14kouki View Post
Its a billet lower section with a greddy s14 intake !

http://www.nissansilvia.com/forums/i...tach_id=401137
pretty cool but the hyper tune manifold is best!

SamsonS4 is offline   Reply With Quote
Old 03-03-2014, 01:12 PM   #65
hobbs
Nissanaholic!
 
Join Date: Aug 2010
Location: Under a rock
Posts: 2,264
Trader Rating: (43)
hobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the roughhobbs is a jewel in the rough
Feedback Score: 43 reviews
Quote:
Originally Posted by SamsonS4 View Post
pretty cool but the hyper tune manifold is best!

Shame the intake runners are so short, I was really considering hacking up a S14 manifold for use on a VE.
hobbs is offline   Reply With Quote
Old 03-03-2014, 01:28 PM   #66
SamsonS4
BANNED
 
Join Date: Jan 2014
Location: California love
Age: 43
Posts: 117
Trader Rating: (0)
SamsonS4 is an unknown quantity at this point
Feedback Score: 0 reviews
i posted the wrong one.

SamsonS4 is offline   Reply With Quote
Old 03-03-2014, 06:47 PM   #67
slideways2004
Nissanaholic!
 
Join Date: Apr 2005
Location: Houston
Age: 37
Posts: 1,706
Trader Rating: (6)
slideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enough
Feedback Score: 6 reviews
Send a message via AIM to slideways2004
Quote:
Originally Posted by mewantkouki View Post
^ serious..?

1. P11 or P12 head
2. VVL relocation plates if you have a p11 head. (solenoid is larger)
3. Sr20ve oil pump
4. Pistons with valve reliefs if you plan on running anything larger than p11 cams
5. 20V cas (won't clear s14 lhd firewall)
6. Hall sensor kit if you opt not to use 20v cas
7. fwd sr20de or any other aftermarket sr20 cam gears.
8. sr20ve oil pump drive gear or mazworx spacer
9. machined stock pulley
10. plug oil drain port on block
11. plug oil drain port on head
12. Drill and tap oil feed for vvl solenoid. (side of head)
13. Oil feed line to vvl
14. Oval bolt holes on sr20det manifold of choice or build one with ve flange
15. Mazworx oil pickup tube
16. Mazworx or taarks water pipe
17. aem / denso pencil coils for p11 or s15 coil packs for p12 head
18. Head gasket of choice
19. Cut / flip stock upper intake manifold or xcessive, hypertune, mazworx plenum (xcessive / hypertune are the only options right now for p12 heads)

Pretty sure that's about it.

This is a great list, but how come no one talks about ecu choices??

If you are using a 20v CAS, can you not use the stock ecu the sr20ve came with and get it rom tuned?? I personally prefer not to run standalones b/c of price and mainly b/c there are no good tuners here in town. They all want to make max power and can't setup a reliable tune

Also, this is great! S14 intake manifold bolts right up to this it looks like

http://www.nissansilvia.com/forums/i...tach_id=401137
slideways2004 is offline   Reply With Quote
Old 03-03-2014, 10:09 PM   #68
Yellow4g63
Zilvia FREAK!
 
Join Date: Jan 2003
Location: Socal
Posts: 1,454
Trader Rating: (5)
Yellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of light
Feedback Score: 5 reviews
Send a message via AIM to Yellow4g63
Quote:
Originally Posted by slideways2004 View Post
This is a great list, but how come no one talks about ecu choices??

If you are using a 20v CAS, can you not use the stock ecu the sr20ve came with and get it rom tuned?? I personally prefer not to run standalones b/c of price and mainly b/c there are no good tuners here in town. They all want to make max power and can't setup a reliable tune

Also, this is great! S14 intake manifold bolts right up to this it looks like

http://www.nissansilvia.com/forums/i...tach_id=401137
That's a custom billet job. The VVL intake ports are bigger than the S14's.
__________________

95 240sx RB20 415whp
91 Nx2000 VVL yo
Yellow4g63 is offline   Reply With Quote
Old 03-04-2014, 01:03 AM   #69
rbs14kouki
Zilvia Addict
 
rbs14kouki's Avatar
 
Join Date: Oct 2007
Location: Montreal , Canada
Age: 37
Posts: 817
Trader Rating: (1)
rbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to all
Feedback Score: 1 reviews
Quote:
Originally Posted by hobbs View Post
Shame the intake runners are so short, I was really considering hacking up a S14 manifold for use on a VE.
2500$ us for an intake / throttle body and fuel rail is way to much for my budget !!!! If i could i would dont worry
__________________
AV FABRICATION

Built thread sr20vet s14
http://zilvia.net/f/showthread.php?t=535574
rbs14kouki is offline   Reply With Quote
Old 03-04-2014, 01:33 AM   #70
SamsonS4
BANNED
 
Join Date: Jan 2014
Location: California love
Age: 43
Posts: 117
Trader Rating: (0)
SamsonS4 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by rbs14kouki View Post
2500$ us for an intake / throttle body and fuel rail is way to much for my budget !!!! If i could i would dont worry
what's another 2500 when vet setup is already a big baller set up
SamsonS4 is offline   Reply With Quote
Old 03-04-2014, 01:39 AM   #71
SamsonS4
BANNED
 
Join Date: Jan 2014
Location: California love
Age: 43
Posts: 117
Trader Rating: (0)
SamsonS4 is an unknown quantity at this point
Feedback Score: 0 reviews
All fun and games aside as you are already aware of to build a proper vet setup is some big money and down time.

Def not a set up if budget minded is your game but no expense spared maximum power and response is your game. I read about in aussie land there was a event there was a rb28 tomei powered car and a sr22vet s15 going at it and the vet set up out performed the r28. Very impresive.
SamsonS4 is offline   Reply With Quote
Old 03-04-2014, 09:45 AM   #72
simmode1
Post Whore!
 
simmode1's Avatar
 
Join Date: Feb 2008
Location: Addison, TX
Posts: 5,526
Trader Rating: (0)
simmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfection
Feedback Score: 0 reviews
Send a message via Yahoo to simmode1
Quote:
Originally Posted by SamsonS4 View Post
All fun and games aside as you are already aware of to build a proper vet setup is some big money and down time. Def not a set up if budget minded is your game but no expense spared maximum power and response is your game.
Yeah, I think that's why I probably won't do this. I love everything I've read about the VET swap, but ontop of the cost of doing it, I feel like you'd also need to totally revise your drivetrain & suspension to put all this power/response to the ground, even further increasing costs. Definitely not the route to go for someone like me looking for a simple & mild low 300hp range 240. VET is big boy stuff. But if I hit that point when 300hp+ is no longer enough for me... VET, here I come.

Last edited by simmode1; 03-04-2014 at 10:34 AM..
simmode1 is offline   Reply With Quote
Old 03-04-2014, 10:15 AM   #73
rbs14kouki
Zilvia Addict
 
rbs14kouki's Avatar
 
Join Date: Oct 2007
Location: Montreal , Canada
Age: 37
Posts: 817
Trader Rating: (1)
rbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to allrbs14kouki is a name known to all
Feedback Score: 1 reviews
You can upgrade to vet for reliability too !

I started from scratch with this sr20vet

Sold my racecar that had a ls1 with g-force gsr too buy my house and stsrted this project on the side

A 400 to 500whp sr wont need all that much $$$

PJ's (fastest s13 with a h-patern transmission and street legal tire) makes 900whp with an xcessive intake that cost 300$ compare too all the other option that are close to 1000$ and up !!!


My friend has 425 whp

sr20vet:
Precision 5830
Topmount manifold
Stock head + dual valve springs upgrade
S15 transmission with exedy super single
Nothing to special


And he drives the car every day to work (he will upgrade the transmission when it brakes)

Personnaly I would not built a vet to run a t28 and have 300whp
__________________
AV FABRICATION

Built thread sr20vet s14
http://zilvia.net/f/showthread.php?t=535574
rbs14kouki is offline   Reply With Quote
Old 03-04-2014, 10:36 AM   #74
Drift_FX
Zilvia Junkie
 
Drift_FX's Avatar
 
Join Date: Apr 2010
Location: South NJ
Posts: 390
Trader Rating: (3)
Drift_FX is an unknown quantity at this point
Feedback Score: 3 reviews
almost done.....
Drift_FX is offline   Reply With Quote
Old 03-04-2014, 10:39 AM   #75
s13silvia123
Post Whore!
 
s13silvia123's Avatar
 
Join Date: May 2006
Location: where waldo is
Age: 42
Posts: 3,266
Trader Rating: (16)
s13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfection
Feedback Score: 16 reviews
I notice that everyone talks about the parts needed to make the conversion to reality, but what do everyone use as the engine harness?

Is there anyone other plugs on the wiring harness to run the head which is different if at all different from the SR20? Will the standalone PFC work with the head?

To make the VVL work, will a multi-switch need to be installed to turn it on or off?

I've been making decisions for the last year and half if I should go this route if I'm not hitting my goals just with my SR. I'm looking at what would work to make to a reality if I don't have to much to work with.

What are the options for this?
__________________
18g and 20g turbo users click on me
http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

s13silvia123 is offline   Reply With Quote
Old 03-04-2014, 10:43 AM   #76
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
You can use your S13 harness for all the necessary sensors. You'll need to run an RPM switch to control the solenoids.

As for EMS, Nistune or ROM tuning can be utilized.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is offline   Reply With Quote
Old 03-04-2014, 10:45 AM   #77
Drift_FX
Zilvia Junkie
 
Drift_FX's Avatar
 
Join Date: Apr 2010
Location: South NJ
Posts: 390
Trader Rating: (3)
Drift_FX is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by s13silvia123 View Post
I notice that everyone talks about the parts needed to make the conversion to reality, but what do everyone use as the engine harness?

Is there anyone other plugs on the wiring harness to run the head which is different if at all different from the SR20? Will the standalone PFC work with the head?

I've been making decisions for the last year and half if I should go this route if I'm not hitting my goals just with my SR. I'm looking at what would work to make to a reality if I don't have to much to work with.
im doing a completely custom harness, but the majority of the harness is unchanged when switching to this head, you just need to modify it to accept the different coils and ignition box.
Drift_FX is offline   Reply With Quote
Old 03-05-2014, 07:28 AM   #78
autotechmotoring
Banned from the Marketplace
 
Join Date: May 2005
Location: Cali
Posts: 269
Trader Rating: (9)
autotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enough
Feedback Score: 9 reviews
Quote:
Originally Posted by s13silvia123 View Post
I notice that everyone talks about the parts needed to make the conversion to reality, but what do everyone use as the engine harness?

Is there anyone other plugs on the wiring harness to run the head which is different if at all different from the SR20? Will the standalone PFC work with the head?

To make the VVL work, will a multi-switch need to be installed to turn it on or off?

I've been making decisions for the last year and half if I should go this route if I'm not hitting my goals just with my SR. I'm looking at what would work to make to a reality if I don't have to much to work with.

What are the options for this?
Existing engine harness stays the same. A tuneable ecu is a plus. You can use a MSD 8969 to activate the VVL and just wire in the solenoids to the unit.

Another plus that alot have not mentioned is that the VVL head uses solid shaft mounted rockers vs. free floating rockers in the std DET head. The chances of breaking rockers with the VVL head is 0 to none.
autotechmotoring is offline   Reply With Quote
Old 03-05-2014, 03:43 PM   #79
Imarvin240
Nissanaholic!
 
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Imarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura aboutImarvin240 has a spectacular aura about
Feedback Score: 18 reviews
Quote:
Originally Posted by autotechmotoring View Post
Existing engine harness stays the same. A tuneable ecu is a plus. You can use a MSD 8969 to activate the VVL and just wire in the solenoids to the unit.

Another plus that alot have not mentioned is that the VVL head uses solid shaft mounted rockers vs. free floating rockers in the std DET head. The chances of breaking rockers with the VVL head is 0 to none.
__________________
https://instagram.com/eck_matthew/
Imarvin240 is offline   Reply With Quote
Old 03-05-2014, 07:24 PM   #80
slideways2004
Nissanaholic!
 
Join Date: Apr 2005
Location: Houston
Age: 37
Posts: 1,706
Trader Rating: (6)
slideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enough
Feedback Score: 6 reviews
Send a message via AIM to slideways2004
Quote:
Originally Posted by jr_ss View Post
You can use your S13 harness for all the necessary sensors. You'll need to run an RPM switch to control the solenoids.

As for EMS, Nistune or ROM tuning can be utilized.
The sr20ve stock ecu plugs into S13 redtop/blacktop ecu plug?
slideways2004 is offline   Reply With Quote
Old 03-05-2014, 07:42 PM   #81
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
No, you use the DET ECU with a ROM tune or Nistune...

You'll be running the DET harness and ECU, but have it tuned for your setup.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is offline   Reply With Quote
Old 03-05-2014, 09:04 PM   #82
Yellow4g63
Zilvia FREAK!
 
Join Date: Jan 2003
Location: Socal
Posts: 1,454
Trader Rating: (5)
Yellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of light
Feedback Score: 5 reviews
Send a message via AIM to Yellow4g63
S13 ecu run the Nismotonic daughter board. It will kick the VVL for you if you use one of the outputs on the board and run a map sensor and 20X20 tables.
__________________

95 240sx RB20 415whp
91 Nx2000 VVL yo
Yellow4g63 is offline   Reply With Quote
Old 03-06-2014, 08:39 AM   #83
Ramonesfreak2010
Zilvia Addict
 
Ramonesfreak2010's Avatar
 
Join Date: Jul 2008
Location: Silver Spring, MD
Age: 32
Posts: 963
Trader Rating: (11)
Ramonesfreak2010 is an unknown quantity at this point
Feedback Score: 11 reviews
Decided to mock up the head and manifold on the block for some extra motivation. Been a slow build since I am paying for this semester of college at the moment.
Ramonesfreak2010 is offline   Reply With Quote
Old 03-06-2014, 08:42 PM   #84
slideways2004
Nissanaholic!
 
Join Date: Apr 2005
Location: Houston
Age: 37
Posts: 1,706
Trader Rating: (6)
slideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enoughslideways2004 will become famous soon enough
Feedback Score: 6 reviews
Send a message via AIM to slideways2004
Quote:
Originally Posted by jr_ss View Post
No, you use the DET ECU with a ROM tune or Nistune...

You'll be running the DET harness and ECU, but have it tuned for your setup.
Thanks for your help!

All of a sudden it doesn't look that complicated anymore. lol

p11 head, here I come.
slideways2004 is offline   Reply With Quote
Old 03-07-2014, 08:27 AM   #85
autotechmotoring
Banned from the Marketplace
 
Join Date: May 2005
Location: Cali
Posts: 269
Trader Rating: (9)
autotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enough
Feedback Score: 9 reviews
Quote:
Originally Posted by slideways2004 View Post
Thanks for your help!

All of a sudden it doesn't look that complicated anymore. lol

p11 head, here I come.
Nope it honestly isnt. Other than wiring in the new Denso or equivalent coils and your VVL solenoids, its pretty much a straight forward swap over.
autotechmotoring is offline   Reply With Quote
Old 03-07-2014, 10:15 AM   #86
s13silvia123
Post Whore!
 
s13silvia123's Avatar
 
Join Date: May 2006
Location: where waldo is
Age: 42
Posts: 3,266
Trader Rating: (16)
s13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfection
Feedback Score: 16 reviews
For the turbo manifold or exhaust manifold, would you have to notch the existing bolt holes to accomodate with the VET head? Does the exhaust ports match with the DET turbo manifolds?

Reason for the turbo manifold is because I don't want to buy another manifold since I am using the PowerLab twin scroll.
__________________
18g and 20g turbo users click on me
http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

s13silvia123 is offline   Reply With Quote
Old 03-07-2014, 10:20 AM   #87
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
Exhaust ports share the same centerlines, you just need to lift the manifold up roughly .125". So oblonging the holes is a must if you have a DET manifold. The ports are higher in the head because of the coolant passages and different chamber and valve angles.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is offline   Reply With Quote
Old 03-07-2014, 11:07 AM   #88
autotechmotoring
Banned from the Marketplace
 
Join Date: May 2005
Location: Cali
Posts: 269
Trader Rating: (9)
autotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enoughautotechmotoring will become famous soon enough
Feedback Score: 9 reviews
Or there are several manifold options out there already that can accomodate both DET and VE setups
autotechmotoring is offline   Reply With Quote
Old 03-07-2014, 11:15 AM   #89
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
Quote:
Originally Posted by autotechmotoring View Post
Or there are several manifold options out there already that can accomodate both DET and VE setups
He doesn't want to purchase a new manifold.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is offline   Reply With Quote
Old 03-07-2014, 11:29 AM   #90
GroundPerformance
Zilvia FREAK!
 
GroundPerformance's Avatar
 
Join Date: Oct 2008
Location: Socal
Posts: 1,479
Trader Rating: (44)
GroundPerformance is an unknown quantity at this point
Feedback Score: 44 reviews
You should really need to spend much on manifolds or relocation blocks to convert to VVL if your not planning to go on monster build. I'm actually doing this now and I will share it with Zilvia on the Builds thread. Just waiting for Admin approval.
__________________

SoCal KA24DET/KA24ET Owners
<< Join the FB Group >>
GroundPerformance is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net