10-03-2006, 12:32 AM | #1 |
Leaky Injector
|
s13 with RB25, T3/T4! Trade for S14 or S13!
Lowered price, $7,500 must sell!
1993 Black S13 RB25 Hatchback with 139,XXX on shell and around 42,XXX on motor. Clean title in hand. Body on this car is in excellent condition, only dents are very small ones on the hood caused by hail, but hardly noticable. Interior is also in very nice condition, carpet is a little rough at places but over all ok. Its got a pretty new paint job, nothing really nice but the paint is shinny. Car has working power streering but no A/C. This car is my daily driver and runs great. Located in Atlanta, willing to ship if buyer sets it up. Asking price is $7,500. I am also looking for trades of an S13 COUPE (no hatches) with an SR20 and perferably working A/C and a silvia front end; but those two things aren't that important. Or an S14 with a very slightly modded or stock sr20 or a ka with a highly modded body. Shoot me offers please PM me to contact me modifications: three angle valve job sodium bath for the head cosmetic metal head gasket arp head studs t3/t4 turbo tial external wastegate hks super sequential blow off valve (loud as hell on this car) bored 20 over weisco ceramic coated pistons crank shaft reconditioned connecting rods reconditioned 12"X 24"X 4" fmic koyo radiator w/ 2 10" cooling fans new intercooler piping 3" downpipe 3" hks super dragger exhaust safc2 255lph fuel pump stage 4 clutch (Competition Clutch) and reconditioned flywheel Nismo Short Shifter Autometer Boost Guage what needs to be fixed: needs a speed sensor beacuse speedometer doesnt work, a 300zx non turbo one works i think. same with the tach, although the tach on the safc2 works properly. Needs new wastegate, very cheap The car is VERY clean and painted black. I can't figure out how to upload pictures on here so if you want to pm me and I can email you pictures then I can. Thanks a lot. Last edited by FastAssS13; 11-06-2006 at 04:02 PM.. Reason: price change!!!! |
Sponsored Links |
10-03-2006, 03:17 AM | #2 |
BANNED
|
willing to trade
ENGINE SPECS AFTERMAKET PISTON AFTERMAKET RODS HEAD PORTED AND PLOSHED AFTERMAKET CAMS TOMEI AFTERMAKET VALVE AFTERMAKET VALVE SPRINS TOMEI AFTERMAKET CAM GEARS TOMEI HKS GT 2871 TURBO TURBO SX FMIC JDM APEX EXHAUST ADJ FPR 550 INJECTORS NEW WATER PUMP, STARTER ,ALTERNATOR ALL NEW GASKETS AND SEALS AND RUBBER RINGS HKS DOWN PIPE CUSTOM RACING RADIATOR OS GIKEN LIGHT FLYWHEEL WITH TRIPLE PLATE CLUTCH RIDE ON NISMO 2 WAY TIEN HR AND THE FRONT AND SUSTEC SS PROS AND THE REAR SKYLINE FRONT AND REAR BRAKES 5 LUG CONVERSION SS BRAKE LINES BODY SILVIA FRONT END CONVERSION 30MM FRONT FENDERS JDM APEX N1CATBACK INSIDE KENWOOD MP3 CD PLAYER WITH AMP AND SUB MOMO BUCKET SEAT BRIDE BUCKET SEAT SIMPSON SEAT BEATS PLX WIDEBAND COMPUTER 2 BUCKET SEATS 5 GAUGES APEXI RSM R32 CLUSTER CHIPPED ECU PERSONAL STEERING WHEEL THIS CAR HAS MORE PARTS ON IT .. I CANT REMEMBER SO YOU HAVE TO COME CHECK IT OUT THIS CAR IS READY FOR HIGH HP.. I HAVE NEVER BUILT A RB20DET LIKE THIS BEFORE SO I HAVE NOT IDLE HOW MUCH HP THE ENGINE CAN HOLD.. BUT WITH A BIGGER TURBO YOU SHOULD BE ABLE TO GET 750HP AND BE SAFE YOU CAN PICK THIS CAR UP OR I CAN HAVE IT SHIPPED |
10-03-2006, 07:01 AM | #3 | |
BANNED
Join Date: Mar 2004
Location: Midlothian. VA
Posts: 2,050
Trader Rating: (0)
Feedback Score: 0 reviews
|
Quote:
pics now buttmonkey |
|
10-05-2006, 11:32 PM | #6 |
BANNED
Join Date: Mar 2004
Location: Midlothian. VA
Posts: 2,050
Trader Rating: (0)
Feedback Score: 0 reviews
|
trade ya a s13 hatch, hks gt2540r turbo, megan manifold, huge fmic, downpipe, sr20det with 30k miles 160 +- 5 all the way across, hks plugs, hks actuator, hks ssqv bov, spec stage 3 clutch, flywheel resurface, short shifter, no grinds, walbro 255lph, megan racing fpr w/ gauge, 3" duals exhaust, tomei oil cap, i was told motor had tomei cams too, but havent taken valve cover off, this motor came from a wrecked silvia straight from JP.
car runs great, pulls hard as shit on stock actuator 8.5 lbs (.6 bar) comes wiht brand new SARD 850 cc injectors and collars and a z32 mafs and a brand new turbosmart boost controller, i havent run it on any higher boost that stock actuator, i've been waiting on Www.bikirom.com to release its boards so i can tune the car, i was planning on a 360hp goal, but bikirom is taking fuckin forever. i will throw in cash too, the car has a fender dent, and i have a replacement fender, its a 1990 clean title. more pics at http://www.bizlocker.com/sr/ lmk |
10-05-2006, 11:35 PM | #7 |
BANNED
Join Date: Mar 2004
Location: Midlothian. VA
Posts: 2,050
Trader Rating: (0)
Feedback Score: 0 reviews
|
oh yeah and i have all the a/c components, with the a/c connectors for sr pump and 240sx a/c lines, the connecters just need cut and spliced into the 240 lines to fit, includes a r-134a ac conversion kit and all the lines too.
this is afresh swap, 2 months ago |
10-05-2006, 11:38 PM | #8 |
BANNED
Join Date: Mar 2004
Location: Midlothian. VA
Posts: 2,050
Trader Rating: (0)
Feedback Score: 0 reviews
|
question: why does it need a new wastegate? does the car boost spike now? does it have any problems? how does it run/drive? how quick would you say it is too? what do you need to get the tach to work? what manifold is on there now?
|
10-06-2006, 01:23 AM | #10 | |
Leaky Injector
|
Quote:
|
|
10-09-2006, 05:47 PM | #15 |
Leaky Injector
|
You need to check yourself, I'm not on 4AG, so I have no Idea what you are talking about.
And the wastegate is a cheap "HKS Style" ebay one. I thought I corrected that but I guess not. I have another one on there now that is a 46mm badass mo fo. |
10-10-2006, 10:56 AM | #16 |
arite so there just happends to be the same s13 with everthing the same .. same location of pictures ... go on club4ag. go to cars for sale and look for the label "Fully Built s13 400hp... with Bodykit" www.club4ag.com i dont lie !!
komatsu x (club4ag name ) ---AM IN RIVERSIDE CA.. ( from CLUB 4ag ) check yourself yo! I WILL SOMG CAR FULLY BUILT RB20DET S13 1989 240SX FROM CANADA ENGINE SPECS AFTERMAKET PISTON TOMEI AFTERMAKET RODS TOMEI HEAD PORTED AND PLOSHED AFTERMAKET CAMS TOMEI AFTERMAKET VALVE TOMEI AFTERMAKET VALVE SPRINS TOMEI AFTERMAKET CAM GEARS TOMEI HKS GT 2871 TURBO TURBO SX FMIC JDM APEX EXHAUST ADJ FPR 550 INJECTORS NEW WATER PUMP, STARTER ,ALTERNATOR ALL NEW GASKETS AND SEALS AND RUBBER RINGS HKS DOWN PIPE CUSTOM RACING RADIATOR OS GIKEN LIGHT FLYWHEEL WITH TRIPLE PLATE CLUTCH RIDE ON NISMO 2 WAY TIEN HR AND THE FRONT AND SUSTEC SS PROS AND THE REAR SKYLINE FRONT AND REAR BRAKES 5 LUG CONVERSION SS BRAKE LINES BODY SILVIA FRONT END CONVERSION 30MM FRONT FENDERS JDM APEX N1CATBACK INSIDE KENWOOD MP3 CD PLAYER WITH AMP AND SUB MOMO BUCKET SEAT BRIDE BUCKET SEAT SIMPSON SEAT BEATS PLX WIDEBAND COMPUTER 2 BUCKET SEATS 5 GAUGES APEXI RSM R32 CLUSTER CHIPPED ECU PERSONAL STEERING WHEEL THIS CAR HAS MORE PARTS ON IT .. I CANT REMEMBER SO YOU HAVE TO COME CHECK IT OUT THIS CAR IS READY FOR HIGH HP.. I HAVE NEVER BUILT A RB20DET LIKE THIS BEFORE SO I HAVE NOT IDLE HOW MUCH HP THE ENGINE CAN HOLD.. BUT WITH A BIGGER TURBO YOU SHOULD BE ABLE TO GET 750HP AND BE SAFE YOU CAN PICK THIS CAR UP OR I CAN HAVE IT SHIPPED ... WOW the same MMHH..... and you posted on 240sxforums tooo.. whats going on here .. is all i have to say |
|
10-10-2006, 11:24 AM | #17 |
Zilvia FREAK!
|
hahaha. Dude the rb20 is from komatsu. he is local in riverside moval area in socal. he has been trying to get rid of his car for a while. I think you are mistakening them for two different people. This guy fast13 has an rb25 and komatsu has an rb20.
__________________
If you dont know SEARCH!!! |
10-10-2006, 11:43 AM | #18 |
^^ extacly my point smart guy its the same car .. but on one website its a rb20 and on the other its a rb25.. duhhh ..ignoranance .. and if its two different guys then why do they both have the same pictures .."komastsu" is from riverside this guy is from atl but have the same color house same color car same everything doesnt add up !! and same set ups n mod's but different label engines..explain that to me if you would be so kind!
|
|
10-10-2006, 01:06 PM | #19 |
Leaky Injector
|
hahahahaahahahahaha, are you serious. Look at that car, it is no where even near mine you dumbass, he even posted on my thread asking if I wanted to trade my car for his. You stupid fucking newbies are retarded.
His car is a coupe, mine a hatch. His car has silvia front end, mine doesn't. His car has a body kit and is painted a completely different color. His car has wheels, mine doesn't. I hope you realize that Rb20s, and Rb25 look similar because of the intake manifold that runs over the valve cover, that doesn't mean all cars are the same. |
10-10-2006, 01:08 PM | #20 |
Leaky Injector
|
God damn just look at the whole thread, he posted on THIS THREAD ON THIS PAGE ASKING IF I WANTED TO TRADE FOR HIS CAR AND POSTED PICTURES. I THINK YOU ARE CONFUSED AND NEED TO READ THE POST, THAT DOESN'T MEAN THAT HIS CAR IS MY CAR THAT I AM SELLING. DUMBASS, AGAIN GO CHECK YOURSELF.
|
10-10-2006, 01:47 PM | #21 |
Nissanaholic!
Join Date: Aug 2003
Location: Los Angeles/Berkeley, CA
Posts: 2,238
Trader Rating: (1)
Feedback Score: 1 reviews
|
some good comedy here
__________________
Petition Nissan to Make the IDx on http://IDxClub.co ! |
10-10-2006, 01:53 PM | #22 | |
Leaky Injector
|
Quote:
|
|
10-11-2006, 12:31 AM | #26 | |
Leaky Injector
|
Quote:
But the car is still for sale. The black one!!!! So someone make me an offer. It is going real soon for 6K if I can't find a good buyer. |
|
Bookmarks |
|
|