SR20 STI 550cc injector pigtails question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

doridoridori · 03-11-2018, 09:39 PM

had a quick question, so i went with the yellow 550 sti injectors (04-06), a friend had told me to order some denso connectors and put them in place of my stock injector clips. Problem is the ones i got do not fit properly. Wanted to know does anyone have a direct link where i can buy pigtails that will fit with no issue?

oLemurs · 03-11-2018, 10:24 PM

did you get the ebay special denso connectors? it looks like these should just plug right in you just do the pigtail wiring. https://www.wiringspecialties.com/de...tor-connector/

doridoridori · 03-11-2018, 10:37 PM

Quote:

Originally Posted by oLemurs

did you get the ebay special denso connectors? it looks like these should just plug right in you just do the pigtail wiring. https://www.wiringspecialties.com/de...tor-connector/

yea the ones i got were from ebay, they had sti as one of the labels but they didn't work, tried them before?

bardabe · 03-11-2018, 10:46 PM

I used 350Z pig tails on my STi yellows. wiring specialties should have them.

Ilya · 03-11-2018, 10:50 PM

I purchased these for my 550cc yellows: https://motorwestperformance.com/product/c120-4pack-l1/

Work like a charm. No soldering and easy to switch back to stock (California ughhhh)

doridoridori · 03-11-2018, 11:02 PM

Quote:

Originally Posted by Ilya

I purchased these for my 550cc yellows: https://motorwestperformance.com/product/c120-4pack-l1/

Work like a charm. No soldering and easy to switch back to stock (California ughhhh)

would do that but cut the connectors already, looks like WS it is, appreciate the help from everyone

jedi03 · 03-12-2018, 08:19 AM

any Subaru should have the same clip...buddy clipped mine for me from an NA outback at the junkyard

thom · 03-14-2018, 08:11 AM

Why use pigtails ?

I have those on my sr20 and the only thing i did was a little trimming on the side of the injector and move the pins inside a little on an angle. And they fitted perfect .

doridoridori · 03-14-2018, 07:19 PM

Quote:

Originally Posted by thom

Why use pigtails ?

I have those on my sr20 and the only thing i did was a little trimming on the side of the injector and move the pins inside a little on an angle. And they fitted perfect .

why use pigtails? not sure i understand what you mean by that, from my understanding the connector to the injector with wires at the end would be considered an injector pigtail, no?

thom · 03-15-2018, 12:22 AM

Sorry i meant why use different

Because i used the original, just unplugged the stock injectors and with that small modification i mentioned i put them on.

EFITTZY · 03-15-2018, 06:28 AM

Another option would be the nismo 555cc injectors. Reasonably priced IMO

https://www.ebay.com/itm/4x-OEM-NISM...VY-Bdn&vxp=mtr

No dicking around with other pigtails or soldering into injector harness...
Just plug, tune, and dori

*brndck* · 03-15-2018, 07:36 AM

or just go to EVERYJUNKYARDINAMERICA
clip pigtails off ANYSUBARUEVER
leave.

jedi03 · 03-15-2018, 07:58 AM

that works too...but for those who don't like trimming...its 2 wires and I have yet to see anyone mess up the wire order to cut and solder or butt connect the wires

*brndck* · 03-15-2018, 10:34 AM

Quote:

Originally Posted by jedi03

that works too...but for those who don't like trimming...its 2 wires and I have yet to see anyone mess up the wire order to cut and solder or butt connect the wires

literally you can't mess up the wire order. you can reverse it and they work fine. an injector is just a switch. on. off. doesn't matter which end gets power and which end gets ground.

doridoridori · 03-15-2018, 07:34 PM

Quote:

Originally Posted by EFITTZY

Another option would be the nismo 555cc injectors. Reasonably priced IMO

https://www.ebay.com/itm/4x-OEM-NISM...VY-Bdn&vxp=mtr

No dicking around with other pigtails or soldering into injector harness...
Just plug, tune, and dori

originally wanted to do that but don't like the JECS, wanted oem, i've heard ppl have issues with JECS

doridoridori · 03-15-2018, 07:36 PM

Quote:

Originally Posted by thom

Sorry i meant why use different

Because i used the original, just unplugged the stock injectors and with that small modification i mentioned i put them on.

oh ok no worries, well trimming the injectors i'd imagine they don't clip in place and can possibly pop off, definitely want them secure. either way clips came in yesturday going to get them on this weekend finally and should be able to get the car started

derass · 03-16-2018, 01:16 AM

Quote:

Originally Posted by doridoridori

originally wanted to do that but don't like the JECS, wanted oem, i've heard ppl have issues with JECS

What? JECS is an OEM. They make the Nissan / Nismo / Tomei / HKS sidefeed injectors. Your STI injectors are JECS too.

doridoridori · 03-16-2018, 01:42 AM

Quote:

Originally Posted by derass

What? JECS is an OEM. They make the Nissan / Nismo / Tomei / HKS sidefeed injectors. Your STI injectors are JECS too.

sorry said that wrong, i mean the cheaper aftermarket jecs injectors have been known to be 50/50. also heard (not sure if true or not haven't personally dealt with this) but some injectors are labeled via ebay as jecs oem and aren't, i only really trust oem injectors i know pulled from a vehicle. seems like if the price is cheap enough on ebay they could be oem looking replica injectors. Either way got the injectors i need

doridoridori · 03-16-2018, 01:43 AM

Quote:

Originally Posted by brndck

or just go to EVERYJUNKYARDINAMERICA
clip pigtails off ANYSUBARUEVER
leave.

would have did that but with my work schedule i'll never make it to a junkyard before they close

Ilya · 03-16-2018, 09:17 AM

What injector latency do you use with the STIs? I have a hard time believing that the latency is 1050uS for 550cc.

Also, you cannot beat the price of Yellows, for 120$ you have superior quality injectors with brand new adapter pigtails.

derass · 03-16-2018, 02:03 PM

Quote:

Originally Posted by doridoridori

sorry said that wrong, i mean the cheaper aftermarket jecs injectors have been known to be 50/50. also heard (not sure if true or not haven't personally dealt with this) but some injectors are labeled via ebay as jecs oem and aren't, i only really trust oem injectors i know pulled from a vehicle. seems like if the price is cheap enough on ebay they could be oem looking replica injectors. Either way got the injectors i need

Gotcha. Calling them "aftermarket jecs" isn't quite accurate though. Those eBay ones for $150 clearly are not JECS, but rather some other aftermarket brand. It's damn near impossible that they're OEM quality for that price.

And then there are re-drilled injectors like Five-0 and Deatschwerks. They either start with a stock JECS or other injectors and drill out the tips for more flow. The quality and resulting spray pattern are often garbage.

http://www.motoiq.com/MagazineArticl...Injectors.aspx

doridoridori · 03-18-2018, 12:26 PM

Quote:

Originally Posted by derass

Gotcha. Calling them "aftermarket jecs" isn't quite accurate though. Those eBay ones for $150 clearly are not JECS, but rather some other aftermarket brand. It's damn near impossible that they're OEM quality for that price.

And then there are re-drilled injectors like Five-0 and Deatschwerks. They either start with a stock JECS or other injectors and drill out the tips for more flow. The quality and resulting spray pattern are often garbage.

http://www.motoiq.com/MagazineArticl...Injectors.aspx

thanks for clearing that up, my term was wrong i think i meant to say redrilled, someone told me to stay away from those. And you are right for how cheap that price was sounds too good to be true and it usually is. I just had a fresh engine rebuil, spent a pretty penny don't want any failure due to re-drilled injectors. I've heard bad stories. Either way got my injector clips in put them on yesturday and they fit just fine.

03-11-2018, 09:39 PM	#1
doridoridori Zilvia Junkie Join Date: Feb 2014 Location: cali Posts: 520 Trader Rating: (4) Feedback Score: 4 reviews	SR20 STI 550cc injector pigtails question had a quick question, so i went with the yellow 550 sti injectors (04-06), a friend had told me to order some denso connectors and put them in place of my stock injector clips. Problem is the ones i got do not fit properly. Wanted to know does anyone have a direct link where i can buy pigtails that will fit with no issue?

03-11-2018, 10:46 PM	#4
bardabe Post Whore! Join Date: Aug 2005 Location: SoCal Age: 34 Posts: 4,719 Trader Rating: (10) Rides Gallery: bardabe Feedback Score: 10 reviews	I used 350Z pig tails on my STi yellows. wiring specialties should have them. __________________ Review Thread

03-14-2018, 08:11 AM	#8
thom Join Date: Jan 2018 Location: Greece Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	Why use pigtails ? I have those on my sr20 and the only thing i did was a little trimming on the side of the injector and move the pins inside a little on an angle. And they fitted perfect . __________________

03-15-2018, 12:22 AM	#10
thom Join Date: Jan 2018 Location: Greece Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	Sorry i meant why use different Because i used the original, just unplugged the stock injectors and with that small modification i mentioned i put them on. __________________

03-15-2018, 06:28 AM	#11
EFITTZY Zilvia Junkie Join Date: Mar 2016 Location: I n d i a n a Age: 28 Posts: 349 Trader Rating: (0) Feedback Score: 0 reviews	Another option would be the nismo 555cc injectors. Reasonably priced IMO https://www.ebay.com/itm/4x-OEM-NISM...VY-Bdn&vxp=mtr No dicking around with other pigtails or soldering into injector harness... Just plug, tune, and dori __________________ (づ｡◕‿‿◕｡)づ T E A M B L O O M

03-11-2018, 10:24 PM	#2
oLemurs Zilvia Member Join Date: Aug 2017 Location: MO Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	did you get the ebay special denso connectors? it looks like these should just plug right in you just do the pigtail wiring. https://www.wiringspecialties.com/de...tor-connector/

03-11-2018, 10:50 PM	#5
Ilya Zilvia Addict Join Date: Jan 2008 Location: San Diego Age: 34 Posts: 712 Trader Rating: (2) Feedback Score: 2 reviews	I purchased these for my 550cc yellows: https://motorwestperformance.com/product/c120-4pack-l1/ Work like a charm. No soldering and easy to switch back to stock (California ughhhh)

03-12-2018, 08:19 AM	#7
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	any Subaru should have the same clip...buddy clipped mine for me from an NA outback at the junkyard

03-15-2018, 07:58 AM	#13
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	that works too...but for those who don't like trimming...its 2 wires and I have yet to see anyone mess up the wire order to cut and solder or butt connect the wires

03-16-2018, 09:17 AM	#20
Ilya Zilvia Addict Join Date: Jan 2008 Location: San Diego Age: 34 Posts: 712 Trader Rating: (2) Feedback Score: 2 reviews	What injector latency do you use with the STIs? I have a hard time believing that the latency is 1050uS for 550cc. Also, you cannot beat the price of Yellows, for 120$ you have superior quality injectors with brand new adapter pigtails.