The everything cd009 swap thread.

[-kenny-]

Originally Posted by TheRealSy90

If you had an affected shifter they would have contacted you by email. If they haven't then don't worry about it.


Sent from my iPhone using Tapatalk

well i bought it of another member so no luck there. still brand new

[KyleT]

Well after waiting for two months already, touge factory told me it will be another 5-6 weeks on the serial nine shifters

[kkaleher]

Got my serialnine shifter today and got the transmission all installed, still need to make some tweaks and put the interior back together but I'm pumped. Shifter sits about 2in further back with the 2j but it shouldn't be a big deal. Quarter master TOB is all shimmed and I think I got it perfect, clutch pedal feels great. Can't wait to actually get this thing back on the road.

[BiG MiKE86]

Originally Posted by kkaleher

Got my serialnine shifter today and got the transmission all installed, still need to make some tweaks and put the interior back together but I'm pumped. Shifter sits about 2in further back with the 2j but it shouldn't be a big deal. Quarter master TOB is all shimmed and I think I got it perfect, clutch pedal feels great. Can't wait to actually get this thing back on the road.

Why did you have to shim the TOB? Pics? Im about to do the same trans swap. Already purchased the SerialNine shifter and ill be getting the collins A340 kit

[KyleT]

My friend ended up giving me his serial nine shifter he just got in the mail. Looks awesome and fits great.

Dropped my 1jz/cd009 in the s13 the other day. After pounding the crap out of the trans tunnel beforehand it still was a very tight fit. I'm using freed engine mounts and the full collins kit. The shifter hole in the tunnel will need to be cut about 2" farther back to fit the shifter base. As expected, but the shifter arm should sit in the right spot on the console.

I'll take some pictures of the transmission later

[Nissansota240]

Originally Posted by KyleT

What Power Steering reservoir is that?

[KyleT]

Originally Posted by Nissansota240

What Power Steering reservoir is that?

You can find it on like any late 90's toyota camry, corolla, solara, etc. Bend the bracket a little and it fits perfect by the clutch master. Same hose sizes as the 240 rack and jz pump.

[Nissansota240]

Originally Posted by KyleT

You can find it on like any late 90's toyota camry, corolla, solara, etc. Bend the bracket a little and it fits perfect by the clutch master. Same hose sizes as the 240 rack and jz pump.

I dig that one, looks better then using the stock one since the ports are out the side, nice!

[di-devol]

Anyone run the new bolt on collins for 1j/2j?

[Rb26kouki]

Anyone running this trans on a KA & which adapter ? I mainly see SR & JZ guys doing this conversion

I founf 4 companies that makes them for the KA

Autotech (half plate)
Collins (full plate)
Jwt (auto bell housing)
Maverick motor sports (full plate)

Trying to see which would be the best one to go with
Jwt is out the picture due to the fact that I need to use their clutch setup

My main concern is being able to use my carbonetic triple disc clutch setup with this conversion

[rbs14kouki]

Originally Posted by Rb26kouki

Anyone running this trans on a KA & which adapter ? I mainly see SR & JZ guys doing this conversion

I founf 4 companies that makes them for the KA

Autotech (half plate)
Collins (full plate)
Jwt (auto bell housing)
Maverick motor sports (full plate)

Trying to see which would be the best one to go with
Jwt is out the picture due to the fact that I need to use their clutch setup

My main concern is being able to use my carbonetic triple disc clutch setup with this conversion

I all ready used (3x) autotech plate on sr and they are perfectly made ... super.fast shiping and great customer service ... you just need to make sure you have the proper air gap for the release bearing and the clutcg

The z33 bellhousing is huge tho and the auto bellhousing + midplate from JWT sure is a great alternative to help with clearence . I just never saw and used any

Stay away from collins . Bad fitment and poor machining on 2 kit we ordered (rb and 13b)

[TheRealSy90]

That's the same email that I received from them. So OBVIOUSLY they ARE reaching out to some people.


Sent from my iPhone using Tapatalk

[MattTenFour]

Originally Posted by TheRealSy90

That's the same email that I received from them. So OBVIOUSLY they ARE reaching out to some people.


Sent from my iPhone using Tapatalk

Exactly, some people were contacted, but obviously not everyone with an effected shifter. Because of the issues I was having, I sent them an email with my order number and asked if mine was one of the units effected. Then I received a response telling me they would ship out a new shifter. So if anyone has yet to hear from them, hold tight, GKTech OBVIOUSLY has not contacted everyone yet.

[Nissansota240]

Originally Posted by MattTenFour

Exactly, some people were contacted, but obviously not everyone with an effected shifter. Because of the issues I was having, I sent them an email with my order number and asked if mine was one of the units effected. Then I received a response telling me they would ship out a new shifter. So if anyone has yet to hear from them, hold tight, GKTech OBVIOUSLY has not contacted everyone yet.

Your issue dosent seem to be relative to the recall (recall being that the material used for the shifter lever itself was not the correct one.) Yours seems like the shifter alignment itself to your transmission.

[MattTenFour]

Originally Posted by Nissansota240

Your issue dosent seem to be relative to the recall (recall being that the material used for the shifter lever itself was not the correct one.) Yours seems like the shifter alignment itself to your transmission.

I didn't really think the shifter itself was the issue. I'm guessing either the shifter is not aligned correctly, rubbing the tunnel, or I have a bent shift fork. I figured it wouldn't hurt to reach out to GKTech and ask if anyone else was experiencing the same issue. I didn't know what the defect was with the first shifters they released until they sent me the email back.

[rbs14kouki]

Bought 3 shifter from gktech and got 3 email to send replacement parts !!! Not one shifter broke but for them to send the right stuff is great

+1 for gktech i love there customer service

[Black240Ct]

+1 for maverick motorsports. I am running their plate and flywheel with act 350z clutch. love the setup

[TheRealSy90]

As far as the GkTech one goes, I haven't actually received any replacement parts yet lol.

[KyleT]

Got the Serialnine shifter installed and it's awesome. Had to cut the shifter hole back a bit and then a little more to be able to slide the shifter on with the transmission in the car. I'll be making a plate to cover the old shifter hole and the part that I had to cut out. The shifter Fits perfect in the console and shifter movement is great!

[joshg51]

damn that shifter position looks perfect. what engine is the trans mated to?

[KyleT]

Originally Posted by joshg51

damn that shifter position looks perfect. what engine is the trans mated to?

1jz vvti with the Collins adapter kit


Sent from my iPhone using Tapatalk

[TheRealSy90]

Insert foot in mouth, my replacement parts for my GkTech shifter were in my mailbox for about a week XD

[TheRealSy90]

Shameless plug my complete SRVQ cd009 kit is for sale.


Sent from my iPhone using Tapatalk

[DJDANGER24]

Aawaaqa!! igloo 9
Pplpl ppl plplplp)l]llpllplpl) p ok o0ll pplplom
O

Sent from my SM-G928T using Tapatalk

[di-devol]

Anyone have trouble getting a hold of Collins? I sent an email with some good questions, failed to receive a reply. I', looking at their whole 1jz/cd009 SWAP kit. So it includes everything needed. Doesn't mention motor brackets, think it comes with it?

EDIT:

lol, I just heard from them. It does include everything I need. I'll be getting the whole stage 3 kit. I'll post up the result when I get it.

[KyleT]

Originally Posted by di-devol

Anyone have trouble getting a hold of Collins? I sent an email with some good questions, failed to receive a reply. I', looking at their whole 1jz/cd009 SWAP kit. So it includes everything needed. Doesn't mention motor brackets, think it comes with it?

EDIT:

lol, I just heard from them. It does include everything I need. I'll be getting the whole stage 3 kit. I'll post up the result when I get it.

I've got the stage 3 kit as well for my 1jz. There should be an option for engine brackets when buying.

[di-devol]

It just said mounts with isolators, I was just being thorough that it included the bracket.

[TheRealSy90]

Nobody is looking for a compete cd009 kit for their sr20? [emoji25]


Sent from my iPhone using Tapatalk

[hanzbrady]

Hey guys,

Our next batch of bellhousings just started heading our way so they'll be available in about 2 weeks. In the next 2 weeks you can preorder your kit or bellhousing for 10% off!

[kkaleher]

Cd009/Fk40 trans---- hooked up a Dakota digital sgi5 to one of the abs sensors on the q45 (97-01) diff but I can't get it to read under 40mph. 40mph+ I can get it pretty close so I scoped the sensor and found it doesn't seem to put out enough voltage at lower speeds for the sgi5 to work. The sgi5 is 1-19V input. Anyone else encounter this or found a solution other than some kind of a gps box?