nascar v8 350z drift car - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

born2boost · 05-24-2011, 09:03 PM

I use to run an s13 with an s13 SR until I fenced it at XDC New Jersey. Right before qualifying I went to burn in a new set and check some changes and I ended up backing into the wall on the bank. the rear quarter caved onto the wheel and the cage and frame twisted. The car lasted for 4 years and I had a blast.

For the 2011 season I have acquired an 03 350z track edition.
I played around with it at streetwise in December and had a blast, I cant wait to see how the car feels with almost triple the horsepower and properly set up.

I began stripping it down with the help of some friends to prepare for soda blasting

Since soda blasting, Autosport Dynamics has begun transforming my 350z from a local drift event beater into a first class burnout machine for XDC and the Streetwise Drift Pro-Am series. Thankfully, Falken’s contract with ASD only restricts them from building a competitor’s Formula Drift Pro car.

Jesse Wisner, an ASD fabricator who isn’t involved with the Falken Drift Program, has been hard at work prepping the car. This will be the 3rd 350z built by ASD, not counting the rebuild on Tyler’s retired pro car for ASD mechanic Steve Sokol.

Jesse has over 80 feet of tubing in the car and is tig welding the cage as well as other components. He is new to drifting, but obviously not new to welding and fabrication; he has been involved in building race cars for many years. Here is his fabrication work on the steering shaft and Wilwood pedal mount.

The cage is complete and only a few more components are left to fabricate before the car heads to paint. Dave from ASD approves!

I originally planned to swap a basic LS1 set up in the car, but I was given an opportunity I couldn’t refuse. ASD has taken on the task of fitting a Dodge Nationwide engine into the Z. The engine has been converted to electronic fuel injection managed by a Haltech P2000 from ASD and tuned by Six Sigma Dyno Services.

The car is way further along but I havent had the time to upload the new pics. I will find the time in the next few days to post them up.

mrchomponthis · 05-24-2011, 09:15 PM

um wow, amazing! I don't even want to think about how much money this is costing.

bubadrft · 05-24-2011, 09:43 PM

woow amazing drift car but as mrchomponthis says how much money is costing

Nick_04K · 05-24-2011, 10:25 PM

Motor specs perhaps? Im not caught up on my nationwide engines haha.

born2boost · 05-25-2011, 11:46 AM

Its a Dodge Evernham engine, 358CI we will see how much power it makes without restrictions, Ive heard they can be in the 800 hp range. To handle all that power the z subframe received a winters quickchange rear end and Driveshaft Shop custom axels and driveshaft.

photo by HaydenHorton, on Flickr

outtamyway · 05-27-2011, 11:20 AM

wow! that thing is beastly!

mr_eh · 05-27-2011, 11:55 AM

mother of god.

Corbic · 05-31-2011, 04:46 PM

Formula D cars really are just becoming Cup Cars.

pandaroo · 05-31-2011, 05:09 PM

holly shit!!! i wana be you when i grow up!

Bambi · 05-31-2011, 10:36 PM

Quote:

Originally Posted by Corbic

Formula D cars really are just becoming Cup Cars.

So true...

XeroX · 06-02-2011, 11:38 AM

Subscribed...

That cage looks FRESH

battle_240sx · 06-24-2011, 03:22 PM

any updates on this yet??

blingbling · 07-02-2011, 04:42 PM

Update with moaar pics!

Imarvin240 · 09-05-2011, 10:08 PM

any updates on this yet hah its been long enough hah time for updates!

NismoTuner21 · 09-05-2011, 11:07 PM

This is extremely sick.

RB240zDET · 09-21-2011, 06:47 PM

OMG! Amazing. Although I am not a fan of 350z's I have to say that this 350z will surely change my mind. I would have loved to have seen a ls1 into a 350z though. I am in the process of putting a ls1 into my caged 280z and plan on drifting it some day. Keep up the good work and more pictures!!!

djayyykiddoh · 10-01-2011, 12:58 AM

just looking at the cage is jawdropping

Wheelchair · 10-15-2011, 03:40 AM

motor win...update fail

pandaroo · 10-15-2011, 06:52 PM

i dont think this guy went through with the build or he probably would of updated it by know.
probably realized he could build this or buy a house for the same money lol.

300ZXttZMAN · 11-17-2011, 10:51 AM

We need an update!!!

graffkid732 · 11-20-2011, 10:19 AM

Quote:

Originally Posted by 300ZXttZMAN

We need an update!!!

This would be nice.

05-24-2011, 09:03 PM	#1
born2boost Leaky Injector Join Date: Dec 2007 Location: Charlotte/Concord, NC Posts: 99 Trader Rating: (1) Feedback Score: 1 reviews	nascar v8 350z drift car I use to run an s13 with an s13 SR until I fenced it at XDC New Jersey. Right before qualifying I went to burn in a new set and check some changes and I ended up backing into the wall on the bank. the rear quarter caved onto the wheel and the cage and frame twisted. The car lasted for 4 years and I had a blast. For the 2011 season I have acquired an 03 350z track edition. I played around with it at streetwise in December and had a blast, I cant wait to see how the car feels with almost triple the horsepower and properly set up. I began stripping it down with the help of some friends to prepare for soda blasting Since soda blasting, Autosport Dynamics has begun transforming my 350z from a local drift event beater into a first class burnout machine for XDC and the Streetwise Drift Pro-Am series. Thankfully, Falken’s contract with ASD only restricts them from building a competitor’s Formula Drift Pro car. Jesse Wisner, an ASD fabricator who isn’t involved with the Falken Drift Program, has been hard at work prepping the car. This will be the 3rd 350z built by ASD, not counting the rebuild on Tyler’s retired pro car for ASD mechanic Steve Sokol. Jesse has over 80 feet of tubing in the car and is tig welding the cage as well as other components. He is new to drifting, but obviously not new to welding and fabrication; he has been involved in building race cars for many years. Here is his fabrication work on the steering shaft and Wilwood pedal mount. The cage is complete and only a few more components are left to fabricate before the car heads to paint. Dave from ASD approves! I originally planned to swap a basic LS1 set up in the car, but I was given an opportunity I couldn’t refuse. ASD has taken on the task of fitting a Dodge Nationwide engine into the Z. The engine has been converted to electronic fuel injection managed by a Haltech P2000 from ASD and tuned by Six Sigma Dyno Services. The car is way further along but I havent had the time to upload the new pics. I will find the time in the next few days to post them up. __________________ www.HaydenHorton.com

05-24-2011, 09:15 PM	#2
mrchomponthis Zilvia Addict Join Date: Mar 2009 Location: fghjghjfg Age: 36 Posts: 877 Trader Rating: (11) Feedback Score: 11 reviews	um wow, amazing! I don't even want to think about how much money this is costing. __________________ CHOMPONWHAT?

05-25-2011, 11:46 AM	#5
born2boost Leaky Injector Join Date: Dec 2007 Location: Charlotte/Concord, NC Posts: 99 Trader Rating: (1) Feedback Score: 1 reviews	Its a Dodge Evernham engine, 358CI we will see how much power it makes without restrictions, Ive heard they can be in the 800 hp range. To handle all that power the z subframe received a winters quickchange rear end and Driveshaft Shop custom axels and driveshaft. photo by HaydenHorton, on Flickr __________________ www.HaydenHorton.com

05-27-2011, 11:55 AM	#7
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 42 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	mother of god. __________________ My 96 S14 \| 501whp SOLD

05-31-2011, 05:09 PM	#9
pandaroo Zilvia Member Join Date: Nov 2010 Location: panama city florida Posts: 165 Trader Rating: (1) Feedback Score: 1 reviews	holly shit!!! i wana be you when i grow up! __________________ 89 2tone coupe 2jzgte swap in progress

05-24-2011, 09:43 PM	#3
bubadrft Join Date: Dec 2010 Location: mexico Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	woow amazing drift car but as mrchomponthis says how much money is costing

05-24-2011, 10:25 PM	#4
Nick_04K Zilvia Junkie Join Date: Jun 2010 Location: Vernal, UT Age: 29 Posts: 467 Trader Rating: (0) Feedback Score: 0 reviews	Motor specs perhaps? Im not caught up on my nationwide engines haha.

05-27-2011, 11:20 AM	#6
outtamyway Leaky Injector Join Date: Nov 2010 Location: SoCal Posts: 141 Trader Rating: (1) Feedback Score: 1 reviews	wow! that thing is beastly!

05-31-2011, 04:46 PM	#8
Corbic Post Whore! Join Date: Jul 2005 Location: US Age: 40 Posts: 8,226 Trader Rating: (8) Feedback Score: 8 reviews	Formula D cars really are just becoming Cup Cars.

06-02-2011, 11:38 AM	#11
XeroX Zilvia Junkie Join Date: Jan 2009 Location: Sacramento, CA Age: 40 Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	Subscribed... That cage looks FRESH

06-24-2011, 03:22 PM	#12
battle_240sx Leaky Injector Join Date: Jan 2010 Location: jacksonville nc Age: 39 Posts: 95 Trader Rating: (1) Feedback Score: 1 reviews	any updates on this yet?? __________________

07-02-2011, 04:42 PM	#13
blingbling Zilvia Junkie Join Date: Jan 2011 Location: phoenix az Posts: 360 Trader Rating: (0) Feedback Score: 0 reviews	Update with moaar pics!

09-05-2011, 10:08 PM	#14
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	any updates on this yet hah its been long enough hah time for updates! __________________ https://instagram.com/eck_matthew/

09-05-2011, 11:07 PM	#15
NismoTuner21 Zilvia Addict Join Date: Nov 2007 Location: Wellington, FL Age: 33 Posts: 658 Trader Rating: (10) Feedback Score: 10 reviews	This is extremely sick.

09-21-2011, 06:47 PM	#16
RB240zDET Zilvia Member Join Date: Aug 2011 Location: ATL Posts: 157 Trader Rating: (5) Feedback Score: 5 reviews	OMG! Amazing. Although I am not a fan of 350z's I have to say that this 350z will surely change my mind. I would have loved to have seen a ls1 into a 350z though. I am in the process of putting a ls1 into my caged 280z and plan on drifting it some day. Keep up the good work and more pictures!!!

10-01-2011, 12:58 AM	#17
djayyykiddoh Join Date: Sep 2011 Location: Temecula Age: 30 Posts: 10 Trader Rating: (1) Feedback Score: 1 reviews	just looking at the cage is jawdropping

10-15-2011, 03:40 AM	#18
Wheelchair Leaky Injector Join Date: Mar 2009 Location: ATL Posts: 137 Trader Rating: (0) Feedback Score: 0 reviews	motor win...update fail

10-15-2011, 06:52 PM	#19
pandaroo Zilvia Member Join Date: Nov 2010 Location: panama city florida Posts: 165 Trader Rating: (1) Feedback Score: 1 reviews	i dont think this guy went through with the build or he probably would of updated it by know. probably realized he could build this or buy a house for the same money lol. __________________ 89 2tone coupe 2jzgte swap in progress

11-17-2011, 10:51 AM	#20
300ZXttZMAN Leaky Injector Join Date: Oct 2011 Location: Sulphur, LA 70665 Age: 32 Posts: 64 Trader Rating: (0) Feedback Score: 0 reviews	We need an update!!!