dual cam pistons in a single cam? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Regal_Six707 · 07-16-2018, 08:55 PM

hello all! i had an idea to put these wiseco forged pistons for a dual cam into a single cam. i have searched around and have only found info about swapping single cam pistons into dual cam motors to raise the compression. the piston specs are 89.5 bore and 9.0:1 compression ratio. how would this affect the compression ratio in a single cam motor? if this is a possibility i would go turbo.
my car is an 89. not sure if it is 8.6:1 or 9.1:1. i can check manufacture date next time i drive it. any feedback on this is appreciated!

07-16-2018, 08:55 PM	#1
Regal_Six707 Join Date: Jul 2018 Location: california Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	dual cam pistons in a single cam? hello all! i had an idea to put these wiseco forged pistons for a dual cam into a single cam. i have searched around and have only found info about swapping single cam pistons into dual cam motors to raise the compression. the piston specs are 89.5 bore and 9.0:1 compression ratio. how would this affect the compression ratio in a single cam motor? if this is a possibility i would go turbo. my car is an 89. not sure if it is 8.6:1 or 9.1:1. i can check manufacture date next time i drive it. any feedback on this is appreciated!