The everything cd009 swap thread.

[Joobie610]

I'm using a local kit for SR20 to z33 in Australia by Insane Drifters. They're on fb.

https://facebook.com/InsaneDrifters/

Paid AUD $2350.00 including shipping.





It came with:

- Adapter plate
- Bellhousing machining
- Test fit to ensure everything fit without further modification (no chassis mods)
- Shifter w/ Reverse Lockout
- Gearbox crossmember adapter plates (suit s15 gearbox crossmember and factory mount)
- All required bolts/nuts/washers
- Braided clutch line to suit RHD s13 master to z33 slave
- Single piece tailshaft to suit abs housing

I haven't fit it to the car yet, but he uses the same setup in his ADGP s13 and his old man's daily s15. Looks the goods, comes out in factory location with no need to modify anything.

I believe he would be willing to sell components separately, I just couldn't say no to having it test fit before I coughed up dough.

Edit: I'm using the factory z33 throwout fork and pivot with a Nismo Super coppermix twin plate. I've been told that it will work - another customer has used it before I think.

[Dboyizmlg]

Originally Posted by Joobie610

I'm using a local kit for SR20 to z33 in Australia by Insane Drifters. They're on fb.

https://facebook.com/InsaneDrifters/

Paid AUD $2350.00 including shipping.





It came with:

- Adapter plate
- Bellhousing machining
- Test fit to ensure everything fit without further modification (no chassis mods)
- Shifter w/ Reverse Lockout
- Gearbox crossmember adapter plates (suit s15 gearbox crossmember and factory mount)
- All required bolts/nuts/washers
- Braided clutch line to suit RHD s13 master to z33 slave
- Single piece tailshaft to suit abs housing

I haven't fit it to the car yet, but he uses the same setup in his ADGP s13 and his old man's daily s15. Looks the goods, comes out in factory location with no need to modify anything.

I believe he would be willing to sell components separately, I just couldn't say no to having it test fit before I coughed up dough.

Edit: I'm using the factory z33 throwout fork and pivot with a Nismo Super coppermix twin plate. I've been told that it will work - another customer has used it before I think.

That looks really good!

Is it cheaper than the Mazworx kit?

[Lazyvert93]

Originally Posted by Joobie610

I'm using a local kit for SR20 to z33 in Australia by Insane Drifters. They're on fb.

https://facebook.com/InsaneDrifters/

Paid AUD $2350.00 including shipping.





It came with:

- Adapter plate
- Bellhousing machining
- Test fit to ensure everything fit without further modification (no chassis mods)
- Shifter w/ Reverse Lockout
- Gearbox crossmember adapter plates (suit s15 gearbox crossmember and factory mount)
- All required bolts/nuts/washers
- Braided clutch line to suit RHD s13 master to z33 slave
- Single piece tailshaft to suit abs housing

I haven't fit it to the car yet, but he uses the same setup in his ADGP s13 and his old man's daily s15. Looks the goods, comes out in factory location with no need to modify anything.

I believe he would be willing to sell components separately, I just couldn't say no to having it test fit before I coughed up dough.

Edit: I'm using the factory z33 throwout fork and pivot with a Nismo Super coppermix twin plate. I've been told that it will work - another customer has used it before I think.

Could I ask you a question. What rear diff did you end up running with the jz swap?

[Joobie610]

Originally Posted by Lazyvert93

Could I ask you a question. What rear diff did you end up running with the jz swap?

Wow, I haven't looked at this thread for ages. I run an SR20 in a '97 180sx.

It comes with an R200 ABS longnose diff from factory. I'm using the ABS sensor in the nose of the diff to pickup the speed, R32 extended rear (for extra oil/cooling), 2-way (Tomei I think), R32 5 bolt half shafts and brake setup.

My driveshaft was custom made to suit the application as part of the kit.