17x9 front wheels RUB? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Import_Prophetz · 07-30-2009, 09:21 PM

Do 17x9 Front wheels rub even with tien coilovers? I heard they his the top perch and I would need 15mm Spacers. Has anybody done this, and not need spacers?

blackrms13 · 07-30-2009, 09:24 PM

need to know the offset...

Import_Prophetz · 07-30-2009, 09:27 PM

I want to say +35. Bad offset, and before I get knocked I know I coul have hit the search button. I was lazy, wont happen again.

w0nderbr3ad · 07-30-2009, 09:58 PM

I have about 5mm of space between my coilover and my inner lip. I'm on 17x9 +17 running -3 camber. If you're rubbing just get a spacer or another set of wheels.

slo_slideways · 07-30-2009, 11:34 PM

With a positive offset like 35 or so you may need a 10-15mm spacer. If your running like +20 or less you should be good.

Import_Prophetz · 08-03-2009, 01:52 PM

I was thinking about 15mm spacers, But dont I need to get extended studs?

BigVinnie · 08-03-2009, 02:07 PM

Quote:

Originally Posted by Import_Prophetz

Do 17x9 Front wheels rub even with tien coilovers? I heard they his the top perch and I would need 15mm Spacers. Has anybody done this, and not need spacers?

If your car is an S14 you will need a 10mm spacer, and extended studs.
If you have an s13 you will need a 8mm spacer, no extended lugs needed.

How do I know this? Because I have the sprt MAX 962 rims on my s13, and s14.

JAYTRON · 08-03-2009, 02:18 PM

Quote:

Originally Posted by Import_Prophetz

I was thinking about 15mm spacers, But dont I need to get extended studs?

Just spend a little more and buy 25mm spacers.

Most come with extended studs and screws for your original studs.

Like above.

And to top it off, you'll probably regret not getting 25mm if you buy 15mm

because most people end up wanting a bit more "poke"

Sileighty_85 · 08-03-2009, 04:00 PM

around +20 will be fine

this is my 18X9.5+20 with NO spacers on an S13

venom_5 · 08-03-2009, 04:39 PM

17x9+22 dont rub on an S14 with Eibach Sportlines on KYB GR-2s, since you have coilovers you will have more inside clearance so id say a +35 shouldnt rub but theres only 1 way to be 100% sure

***FaLKoN240*** · 08-03-2009, 06:13 PM

Quote:

Originally Posted by venom_5

17x9+22 dont rub on an S14 with Eibach Sportlines on KYB GR-2s, since you have coilovers you will have more inside clearance so id say a +35 shouldnt rub but theres only 1 way to be 100% sure

Shocks and springs /= coilovers.

The lowest offset you can go on an s chassis with coils and 9" wheels is a 17x9 +25-22.

That's getting lucky, it also depends on how you have your preload set up.

JRwerks · 08-03-2009, 06:17 PM

i run a 17x9.5 +15 with a 235/45 tire in the front ... fenders are not rolled or pulled and i clear fine

***FaLKoN240*** · 08-03-2009, 06:41 PM

Quote:

Originally Posted by silverman182

i run a 17x9.5 +15 with a 235/45 tire in the front ... fenders are not rolled or pulled and i clear fine

Pics of your car and ride height would be important here.

I find that hard to believe since I had an S13 with 17x9 +12 (5mm spacer) with a 215/45/17 and it rubbed when turning.

See the tire on the fender?

You can see smoke from the tire rubbing.

Import_Prophetz · 08-03-2009, 11:57 PM

Nice viper. Thanks, I actually have the sportmazz 962's. Also I have the Rota Grid +15 offset 16x8. I have some volks te37's but they dont look great. Thanks guys. I will try the 8mm studs first. The rear I am putting a widebody on, So I will need some spacers back there. Thanks.

blackrms13 · 08-04-2009, 02:23 AM

Quote:

Originally Posted by Import_Prophetz

Nice viper. Thanks, I actually have the sportmazz 962's. Also I have the Rota Grid +15 offset 16x8. I have some volks te37's but they dont look great. Thanks guys. I will try the 8mm studs first. The rear I am putting a widebody on, So I will need some spacers back there. Thanks.

+35 offset on a widebody?

erghhhhhhhhhhhhh

and im pretty sure Grids are +10mm not 15mm

Brian · 08-04-2009, 10:24 AM

on my s13. stock fenders. front wheel - 17x9.5 +14 and also 17x9 +4 or something.
on my S14. stock fenders. front wheel - 17x9 +-0

I rubbed some tire on the fender here and there, but then again, the cars were low.

Devil Man · 08-04-2009, 10:41 AM

thats a noble not a viper.

i rock 17x9 +22 with a 10mm spacer and i have no rubbing issues.

8Nismo9 · 08-04-2009, 11:09 AM

Quote:

Originally Posted by JAYTRON

Just spend a little more and buy 25mm spacers.

Most come with extended studs and screws for your original studs.

Like above.

And to top it off, you'll probably regret not getting 25mm if you buy 15mm

because most people end up wanting a bit more "poke"

im using those,i still rubbed but that was the inner linear,also rolled my fenders.17x9 +35 all around

Import_Prophetz · 08-06-2009, 08:48 PM

Grids are +15, Custom for my AE86, but I am selling my AE86 soon. I just decided to widebody, and convert the front to s15. Since I sold my MK4 supra I am kinda depressed. That gives me the excuse to work on one of my cars.

Import_Prophetz · 08-06-2009, 09:27 PM

Went to check Rota's, your right +10 offset, sorry.

cole d · 11-26-2009, 01:57 PM

I got a questions for you guys I contemplating rota grid's 18x9.5 +20 all around would that clear springs and agx shocks on a s13?

!Zar! · 11-26-2009, 04:03 PM

There aren't really any clearance issues with shocks and springs.

Coilovers are what you need to watch out for.

mptjimmy · 11-27-2009, 04:07 AM

if you have megan coilovers, they have extended lower brackets,

http://www.meganracing.com/demo/prod...=588&catid=105

cole d · 11-28-2009, 08:47 PM

Quote:

Originally Posted by !Zar!

There aren't really any clearance issues with shocks and springs.

Coilovers are what you need to watch out for.

So, I can get a 18x9.5 +20 on the front of a s13 with shock and springs without a clearance issues?

1gr8bar10der · 12-24-2009, 06:20 PM

I'm about to put 17x10 +25 on mine with coils.

cumbewong · 12-24-2009, 06:58 PM

I'm goin to be buying 18x9.5 +35 wheels. do i need spacers? and if so, what mm?

thankss

wiggafly808 · 12-24-2009, 07:00 PM

I have tein hrs and sportmaxx 962 17x9s as well.

25mm spacers, 25mm overfenders, and i dont rub (front coils all the way down).
I did need 15mm spacers to clear the coils, but opted to go 25 so i wouldnt have to change my studs.

Heres a pic:

LayNLow · 12-24-2009, 08:07 PM

Quote:

Originally Posted by wiggafly808

I have tein hrs and sportmaxx 962 17x9s as well.

25mm spacers, 25mm overfenders, and i dont rub (front coils all the way down).
I did need 15mm spacers to clear the coils, but opted to go 25 so i wouldnt have to change my studs.

Heres a pic:

Um, so whats the offset on the whees?

nismo racer · 12-24-2009, 08:24 PM

right now im running 17x9 spaced out to +4 with -3 camber with just a roll and i rub but not that bad only on full lock is when i rub. its flush on the fender oh and my coils are maxed out low with two collars on each side on the fronts. when i had them at 17x9 et 24 i didnt have any clearance issue with my coils.

lilrusty · 12-24-2009, 10:50 PM

im running 17x9 +28 with 235/40 up front and i dont rub at all....

07-30-2009, 09:21 PM	#1
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	17x9 front wheels RUB? Do 17x9 Front wheels rub even with tien coilovers? I heard they his the top perch and I would need 15mm Spacers. Has anybody done this, and not need spacers?

07-30-2009, 09:24 PM	#2
blackrms13 Post Whore! Join Date: Jul 2007 Location: 626 Posts: 2,591 Trader Rating: (21) Feedback Score: 21 reviews	need to know the offset... __________________ 91' 240sx Fastback LE

07-30-2009, 11:34 PM	#5
slo_slideways Leaky Injector Join Date: Jan 2008 Location: Sactown Age: 39 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	With a positive offset like 35 or so you may need a 10-15mm spacer. If your running like +20 or less you should be good. __________________ REPPIN' NORCAL HARDER THAN HERSHEY'S TURTLE SHELL CHOCOLATE SHIZ!!!

08-03-2009, 04:00 PM	#9
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	around +20 will be fine this is my 18X9.5+20 with NO spacers on an S13 __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

08-03-2009, 04:39 PM	#10
venom_5 Zilvia Member Join Date: May 2008 Location: Nashville, TN Posts: 243 Trader Rating: (2) Feedback Score: 2 reviews	17x9+22 dont rub on an S14 with Eibach Sportlines on KYB GR-2s, since you have coilovers you will have more inside clearance so id say a +35 shouldnt rub but theres only 1 way to be 100% sure __________________ RIP: 95 "Slamry" \| Welcome: "Blurple" 96 240SX SE

07-30-2009, 09:27 PM	#3
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	I want to say +35. Bad offset, and before I get knocked I know I coul have hit the search button. I was lazy, wont happen again.

07-30-2009, 09:58 PM	#4
w0nderbr3ad Zilvia FREAK! Join Date: Feb 2004 Location: Vantucky Posts: 1,294 Trader Rating: (50) Feedback Score: 50 reviews	I have about 5mm of space between my coilover and my inner lip. I'm on 17x9 +17 running -3 camber. If you're rubbing just get a spacer or another set of wheels.

08-03-2009, 01:52 PM	#6
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	I was thinking about 15mm spacers, But dont I need to get extended studs?

08-03-2009, 06:17 PM	#12
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	i run a 17x9.5 +15 with a 235/45 tire in the front ... fenders are not rolled or pulled and i clear fine

08-03-2009, 11:57 PM	#14
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	Nice viper. Thanks, I actually have the sportmazz 962's. Also I have the Rota Grid +15 offset 16x8. I have some volks te37's but they dont look great. Thanks guys. I will try the 8mm studs first. The rear I am putting a widebody on, So I will need some spacers back there. Thanks.

08-04-2009, 10:24 AM	#16
Brian Post Whore! Join Date: Jan 2003 Location: usa Posts: 12,840 Trader Rating: (54) Rides Gallery: Brian Feedback Score: 54 reviews	on my s13. stock fenders. front wheel - 17x9.5 +14 and also 17x9 +4 or something. on my S14. stock fenders. front wheel - 17x9 +-0 I rubbed some tire on the fender here and there, but then again, the cars were low. __________________ http://bhworld.wordpress.com/

08-06-2009, 08:48 PM	#19
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	Grids are +15, Custom for my AE86, but I am selling my AE86 soon. I just decided to widebody, and convert the front to s15. Since I sold my MK4 supra I am kinda depressed. That gives me the excuse to work on one of my cars.

08-06-2009, 09:27 PM	#20
Import_Prophetz Leaky Injector Join Date: Aug 2006 Location: Colorado Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	Went to check Rota's, your right +10 offset, sorry.

11-26-2009, 01:57 PM	#21
cole d Zilvia Member Join Date: Jun 2009 Location: Tejas Age: 16 Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	I got a questions for you guys I contemplating rota grid's 18x9.5 +20 all around would that clear springs and agx shocks on a s13?

11-26-2009, 04:03 PM	#22
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	There aren't really any clearance issues with shocks and springs. Coilovers are what you need to watch out for. __________________

11-27-2009, 04:07 AM	#23
mptjimmy Zilvia Member Join Date: Oct 2009 Location: LA, CA Posts: 151 Trader Rating: (1) Feedback Score: 1 reviews	if you have megan coilovers, they have extended lower brackets, http://www.meganracing.com/demo/prod...=588&catid=105

12-24-2009, 06:20 PM	#25
1gr8bar10der Post Whore! Join Date: Aug 2009 Location: Tampa/Bangkok Posts: 3,431 Trader Rating: (77) Feedback Score: 77 reviews	I'm about to put 17x10 +25 on mine with coils.

12-24-2009, 06:58 PM	#26
cumbewong BANNED Join Date: Dec 2009 Location: Orlando, Florida Age: 34 Posts: 85 Trader Rating: (0) Feedback Score: 0 reviews	I'm goin to be buying 18x9.5 +35 wheels. do i need spacers? and if so, what mm? thankss

12-24-2009, 07:00 PM	#27
wiggafly808 Zilvia Junkie Join Date: Feb 2008 Location: Corvallis, OR Posts: 346 Trader Rating: (11) Feedback Score: 11 reviews	I have tein hrs and sportmaxx 962 17x9s as well. 25mm spacers, 25mm overfenders, and i dont rub (front coils all the way down). I did need 15mm spacers to clear the coils, but opted to go 25 so i wouldnt have to change my studs. Heres a pic:

12-24-2009, 08:24 PM	#29
nismo racer Zilvia FREAK! Join Date: Feb 2008 Location: the 805! Posts: 1,057 Trader Rating: (17) Feedback Score: 17 reviews	right now im running 17x9 spaced out to +4 with -3 camber with just a roll and i rub but not that bad only on full lock is when i rub. its flush on the fender oh and my coils are maxed out low with two collars on each side on the fronts. when i had them at 17x9 et 24 i didnt have any clearance issue with my coils. __________________ PEGASUS

12-24-2009, 10:50 PM	#30
lilrusty Zilvia Addict Join Date: Oct 2008 Location: los angeles Posts: 648 Trader Rating: (37) Feedback Score: 37 reviews	im running 17x9 +28 with 235/40 up front and i dont rub at all....