Clutch Fork Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Racingmax53 · 04-16-2016, 06:34 PM

I recently swapped bellhousings for my S13 and after struggling to get the clutch release fork installed I installed the transmission on the engine. I cannot get the clutch slave cylinder in between the fork and the bolts. I cannot move the clutch fork by hand back and forth. I have the throwout bearing installed the correct way and the retaining clip as well. Any ideas on what the issue might be? Do I have to pull the trans back out? Thank you

04-16-2016, 06:34 PM	#1
Racingmax53 Join Date: Sep 2014 Location: Washington Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Clutch Fork Help I recently swapped bellhousings for my S13 and after struggling to get the clutch release fork installed I installed the transmission on the engine. I cannot get the clutch slave cylinder in between the fork and the bolts. I cannot move the clutch fork by hand back and forth. I have the throwout bearing installed the correct way and the retaining clip as well. Any ideas on what the issue might be? Do I have to pull the trans back out? Thank you