|
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
08-08-2021, 08:35 PM | #1 |
Join Date: Feb 2020
Location: Riverview, FL
Age: 43
Posts: 13
Trader Rating: (0)
Feedback Score: 0 reviews
|
No power to fuel pump
1996 Nissan 240sx with sr20det swap
Issue: Fuel pump is hard wired to the battery via relay and one day all of a sudden loss power. Things I tried 1. Checked fuses 2. Fuel pump works when directly powered via battery 3. Replaced relay with new one 4. Checked my connections and inspected the signal wire (b/y wire) 5. ECU checked by Martin (Rs Enthalpy) found to be in good condition. Tested on another car and works. Pump does not prime/turn on when car is on position. Is there another relay or something else I can check? Car has been down for several days and would love to get her back on the road. Thanks in advance! |
Sponsored Links |
08-09-2021, 09:20 AM | #2 |
Zilvia Junkie
Join Date: Sep 2012
Location: Colorado
Age: 35
Posts: 543
Trader Rating: (12)
Feedback Score: 12 reviews
|
you checked the wiring on the top hat? You may have a semi-broken connection that's requiring more amperage than that relay can provide.
Show a picture of your setup. |
08-09-2021, 09:58 AM | #3 | |
Join Date: Feb 2020
Location: Riverview, FL
Age: 43
Posts: 13
Trader Rating: (0)
Feedback Score: 0 reviews
|
No power to fuel pump
Quote:
So i actually rewired my Walbro fuel pump directly to the relay. Only connection the the top hat are the fuel gauge, low fuel light. I checked my wiring and all looks solid |
|
08-09-2021, 12:21 PM | #4 |
Zilvia Addict
|
My fuel pump works intermittently as well. I assumed the fuel pump was just on its way out. I checked and fixed all connections without pulling the top hat off. Walbro 255, relay setup.
Almost same symptoms. Key to ON position, no fuel pump prime but if I keep trying, it'll eventually work. If you figure out the issue, please post it here. |
Bookmarks |
|
|