DOC RACE TURBO MANIFOLDS Blowout Holiday Sale & FREE Shipping!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

468POWER · 12-12-2012, 10:07 PM

DOC RACE TURBO MANIFOLDS Blowout Holiday Sale & FREE Shipping!!!

WE HAVE DEFINATELY BEGAN DRINKING EARLY WITH TOO MUCH EGG NOGG AND BUBBLY AS OUR HOLIDAY SALE WITH FREE SHIPPING IS LEAVING US WITH NO PROFITS ON THESE QUALITY GOOD 'OL USA MADE DOC RACE TURBO MANIFOLDS AND INTERCOOLERS!!! CONSIDER IT A PRESENT TO ALL OUR FELLOW ZILVIA NISSAN FANS FROM THE BESTEST DOC RACE AUTHORIZED DEALER - PERFORMANCE AUTOWORKS!!!

POST YOUR INQUIRIES HERE, PM, OR EMAIL US FOR OUR BLOWOUT HOLIDAY PRICES.

MAKE IT A VERY MERRY CHRISTMAS, HAPPY HANUKKAH, KWANZAA, AND/OR FESTIVUS FOR THE REST OF US BY PURCHASING ONE OF THESE BAD BOYS FOR A LOVED ONE OR IF YOU LOVE YOURSELF!!!

HERE ARE THE DETAILS AND PICS OF EACH MANIFOLD. WE ALSO HAVE MANIFOLDS FOR 350Z TURBO, Toyota 2JZ, 1JZ, Mazda 93+ RX7, Mazda Miata, Honda and more! We carry every item DOC Race manufactures. See their website for further details...
DOC Race Store, Turbocharging Components

For SR20DET...

Nissan SR20DET T3 Top Mount Manifold

Application notes:
-T3 flange
-Option for 2-bolt 38mm, Tial MVS or MVR/44mm wastegate flange
-Retains AC

Stainless downpipes are also available upon request for $350 in 3" Stainless with 4-bolt, 5-bolt or V-band flange.

The DOC Race Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional ramhorn. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

************************************************** *******

Nissan SR20DET T25 Bottom Mount

The DOC Race SR20DET T25 Bottom mount turbo manifold places your t25/28 framed turbocharger in the factory location. Made from sch 40 stainless steel and a true merge collector this manifold will maximize the output of any turbo that will fit on it.

************************************************** *******

Nissan SR20DET T4 Front Facing Manifold

Application notes:
-Open T4 flange (T3 option available below)
-Single Tial MVR or Dual MVS gate option
-Retains Powersteering and Air Conditioning on S Chassis

The DOC Race T4 Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. This manifold is capable of well over 1000hp in our Twinscroll version and is designed for peak-power situations. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional T3 Center set manifold. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

************************************************** *******

Nissan SR20DET V-Band Top Mount Manifold

Application notes:
Tial V-band Inlet flange
Option for MVS or MVR V-band wastegate flange
Retains AC
Stainless downpipes are also available upon request for $350 in 3" Stainless with 4-bolt, 5-bolt or V-band flange.

The DOC Race Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional T25 Bottom-mount. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

************************************************** *******

SR20DET High Port Billet Intake Manifold

DOC Race Billet SR20DET Intake Manifold. Works with most throttle bodies including the Ross Machine 90mm.

DOC Race Intake Manifolds are designed for extreme boost applications with increased plenum size and calculated runner length for optimum power delivery. These intake manifolds have CNC intake ports for proper airflow through the plenum. Intake manifolds are standard with a billet flange and an array of throttle body possibilities such as the sought after 90mm in the Mustang bolt pattern. DOC still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

This Intake Manifold is designed for maximum output of your SR20DET engine. ECU tuning will be necessary to gain all the possible torque that comes with this High Volume Intake Manifold.

-Will also work with factory-medium sized cams and smaller frame turbo's for mid-range gains.

************************************************** *******

For KA24DE Turbo...

KA24DE T3 Topmount Manifold

DOC Race Nissan KA24DE Topmount Manifold
-Fits ALL Twincam KA24DE Engines, 91-98 240SX
-Powersteering pump bracket modifications necessary

Available with a MVS or MVR wastegate flange, this T3 turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC KA Topmount turbo manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional bottom-mount T25 manifold. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

************************************************** *******

KA24DE T25 Bottom-Mount

The DOC Race Nissan KA24DE T25 Bottom-mount Turbo Manifold was designed to be a bolt-on manifold that will support most Internally Gated T2 frame turbo's. This manifold is able to use the SR20DET T25 Turbo outlet and retains A/C and Powersteering.

Made with 304 sch 40 Stainless steel and a true merge collector, this hand-built piece will take your T28 frame to the maximum!

************************************************** *******

For RB20/25/26...

RB20/25/26 Openscroll Topmount

DOC Race Open T4 Topmount available for RB20/25/26
-T4 Open Inlet Flange
-Single MVR Wastegate flange standard
The DOC Race RB Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit Larger Frame Turbo's. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

************************************************** *******

RB20/25/26 Twinscroll Topmount

Application Notes:
-Standard with Dual Tial MVS V-band wastegate outlets
-Up to 4" downpipe
Tubing specs: 1.660" OD, 1.380" ID, 0.140" wall rated for 1300hp

The DOC Race Twinscroll Turbo manifold is similar to our Topmount manifold application. Our Twinscroll manifold is for maximum flow of your engine and turbo including the best possible spool and no limitations of the maximum output of your combination. DOC Race Twinscroll manifolds have had years of development in order to utilize the proper exhaust pulses to eliminate unwanted exhaust backpressure and vale overlap, in-turn giving you maximum airflow. This manifold is simply the most efficient available on the market! D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds.

POST YOUR INQUIRIES HERE, PM, OR EMAIL US FOR OUR BLOWOUT HOLIDAY PRICES.

Again Happy Holidays and HAPPY NEW YEAR to all fellow Zilvia members and their families from Performance Autoworks!!!

Mitsubayati · 12-12-2012, 10:25 PM

How much for the RB25 Top mount open scroll manifold?

801nismo104 · 12-12-2012, 10:35 PM

price on sr20det t3 top mount and sr20det vband topmount please

K_style · 12-13-2012, 01:43 AM

Price for T3 top mount with 44mm and T2 bottom mount for SR20DET

91EfSi · 12-13-2012, 02:10 AM

Price for Rb20/25 Openscroll top mount as well.

irritatedmax · 12-13-2012, 03:33 AM

SR T25 bottom mount price, please.

1quk240 · 12-13-2012, 07:23 AM

PM price for NA 2jz-ge t3 twinscroll shipped to 85301 please.

mechavore884 · 12-13-2012, 08:49 AM

price for KA24de T3 shipped to 23507

468POWER · 12-13-2012, 09:50 AM

Whoooweee - all PMs and posts replied to! Santa and his raindeer are gonna be a busy man these next two weeks if you guys all jump on this limited deal!

str84dapokie · 12-13-2012, 10:11 AM

KA24DE T25 Bottom-mount Turbo Manifold shipped to 08835

MrJdmEh2 · 12-13-2012, 11:01 AM

can i get a price for a sr20 t25 bottom mount to 11206 thanks.

ForeignMuscle · 12-13-2012, 03:31 PM

3" sr20det downpipe..

Is it just one piece or the two piece like Mazworx that replaces the bottom downpipe before the cat?

Noone selling these has been able to give me any info on the downpipe. Paypal ready I need one TODAY.

Thanks!

Theworm · 12-13-2012, 07:00 PM

Price for - KA24DE T3 Topmount Manifold shipped to 52001

Thanks

VATOCLOWN · 12-13-2012, 09:20 PM

price for front face manifold sr20det in t3 config if possible

AVmagneticZ · 12-13-2012, 09:29 PM

interested in the price of the t3 top mount and t28 oem location bottom mount manifold for sr20

468POWER · 12-14-2012, 06:08 AM

All PMs and posts replied to! Keep em coming.

ForeignMuscle · 12-14-2012, 06:52 AM

Except mine...

Same exact thing I went through with a previous dealer. Ignored and eventually told "oh, doc didn't give any info on the downpipe.."

Thanks anyway..

468POWER · 12-15-2012, 12:22 AM

Quote:

Originally Posted by ForeignMuscle

Except mine...

Same exact thing I went through with a previous dealer. Ignored and eventually told "oh, doc didn't give any info on the downpipe.."

Thanks anyway..

Dude, I am waiting for the exact answer to come in from my buddies at DOC RACE. I just emailed them early this morning. It's only been a day since you asked us the question. Patience is a virtue. LMK if you still need an answer.

Regards,
Will

LOVERboy · 12-15-2012, 12:24 AM

Ka24de t3 top mount manifold shipped to 91730 please! PayPal ready!!!

Sunny D.-

ForeignMuscle · 12-15-2012, 10:00 PM

Hey bud, no problem. Letting me know that to begin with would have been fine too. Take your time.

468POWER · 12-15-2012, 11:57 PM

Quote:

Originally Posted by ForeignMuscle

Hey bud, no problem. Letting me know that to begin with would have been fine too. Take your time.

Weekend now so hope to have an answer for you Monday.

Luvs2slide · 12-16-2012, 01:45 AM

Price for rb25 top mount twin scroll mani shipped to 96319 and 94535

want2drag · 12-20-2012, 11:46 AM

Price on open scroll for rb25, and will it fill s14 with rb25 swap ?

468POWER · 12-25-2012, 09:56 AM

Merry Christmas fellow Zilvia members!
Some of you must be very happy children when Santa delivered your shiny Doc Race manifolds! Not to worry for those that missed out - the UPS man can deliver the same shiny manifold to your door now if you PM or post on thread for our super low beat all blow out price!

Gripstarr · 12-30-2012, 06:56 PM

how much for the sr20det t4 front setting manifold shipped to 70452??

468POWER · 01-10-2013, 10:04 AM

Quote:

Originally Posted by Gripstarr

how much for the sr20det t4 front setting manifold shipped to 70452??

You have PM.

Riodcs · 01-14-2013, 04:25 PM

ka top manifold shipped to 60056

can u guys make ka intake manifold?

468POWER · 01-15-2013, 07:45 PM

Quote:

Originally Posted by Riodcs

ka top manifold shipped to 60056

can u guys make ka intake manifold?

You have PM.

1gr8bar10der · 02-09-2013, 03:10 AM

SR T25 bottom mount shipped to 33615 please.

ng26 · 02-09-2013, 08:52 AM

Ka top mount shipped to 80817?

12-12-2012, 10:07 PM	#1
468POWER Zilvia Junkie Join Date: Sep 2010 Location: New York Posts: 408 Trader Rating: (9) Feedback Score: 9 reviews	DOC RACE TURBO MANIFOLDS Blowout Holiday Sale & FREE Shipping!!! DOC RACE TURBO MANIFOLDS Blowout Holiday Sale & FREE Shipping!!! WE HAVE DEFINATELY BEGAN DRINKING EARLY WITH TOO MUCH EGG NOGG AND BUBBLY AS OUR HOLIDAY SALE WITH FREE SHIPPING IS LEAVING US WITH NO PROFITS ON THESE QUALITY GOOD 'OL USA MADE DOC RACE TURBO MANIFOLDS AND INTERCOOLERS!!! CONSIDER IT A PRESENT TO ALL OUR FELLOW ZILVIA NISSAN FANS FROM THE BESTEST DOC RACE AUTHORIZED DEALER - PERFORMANCE AUTOWORKS!!! POST YOUR INQUIRIES HERE, PM, OR EMAIL US FOR OUR BLOWOUT HOLIDAY PRICES. MAKE IT A VERY MERRY CHRISTMAS, HAPPY HANUKKAH, KWANZAA, AND/OR FESTIVUS FOR THE REST OF US BY PURCHASING ONE OF THESE BAD BOYS FOR A LOVED ONE OR IF YOU LOVE YOURSELF!!! HERE ARE THE DETAILS AND PICS OF EACH MANIFOLD. WE ALSO HAVE MANIFOLDS FOR 350Z TURBO, Toyota 2JZ, 1JZ, Mazda 93+ RX7, Mazda Miata, Honda and more! We carry every item DOC Race manufactures. See their website for further details... DOC Race Store, Turbocharging Components For SR20DET... Nissan SR20DET T3 Top Mount Manifold Application notes: -T3 flange -Option for 2-bolt 38mm, Tial MVS or MVR/44mm wastegate flange -Retains AC Stainless downpipes are also available upon request for $350 in 3" Stainless with 4-bolt, 5-bolt or V-band flange. The DOC Race Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional ramhorn. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. ************************************************ *** Nissan SR20DET T25 Bottom Mount The DOC Race SR20DET T25 Bottom mount turbo manifold places your t25/28 framed turbocharger in the factory location. Made from sch 40 stainless steel and a true merge collector this manifold will maximize the output of any turbo that will fit on it. ********************************************** *** Nissan SR20DET T4 Front Facing Manifold** Application notes: -Open T4 flange (T3 option available below) -Single Tial MVR or Dual MVS gate option -Retains Powersteering and Air Conditioning on S Chassis The DOC Race T4 Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. This manifold is capable of well over 1000hp in our Twinscroll version and is designed for peak-power situations. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional T3 Center set manifold. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. ************************************************ *** Nissan SR20DET V-Band Top Mount Manifold** Application notes: Tial V-band Inlet flange Option for MVS or MVR V-band wastegate flange Retains AC Stainless downpipes are also available upon request for $350 in 3" Stainless with 4-bolt, 5-bolt or V-band flange. The DOC Race Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional T25 Bottom-mount. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. ************************************************ *** SR20DET High Port Billet Intake Manifold DOC Race Billet SR20DET Intake Manifold. Works with most throttle bodies including the Ross Machine 90mm. DOC Race Intake Manifolds are designed for extreme boost applications with increased plenum size and calculated runner length for optimum power delivery. These intake manifolds have CNC intake ports for proper airflow through the plenum. Intake manifolds are standard with a billet flange and an array of throttle body possibilities such as the sought after 90mm in the Mustang bolt pattern. DOC still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. This Intake Manifold is designed for maximum output of your SR20DET engine. ECU tuning will be necessary to gain all the possible torque that comes with this High Volume Intake Manifold. -Will also work with factory-medium sized cams and smaller frame turbo's for mid-range gains. ********************************************** *** For KA24DE Turbo... KA24DE T3 Topmount Manifold** DOC Race Nissan KA24DE Topmount Manifold -Fits ALL Twincam KA24DE Engines, 91-98 240SX -Powersteering pump bracket modifications necessary Available with a MVS or MVR wastegate flange, this T3 turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC KA Topmount turbo manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then our traditional bottom-mount T25 manifold. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. ************************************************ *** KA24DE T25 Bottom-Mount The DOC Race Nissan KA24DE T25 Bottom-mount Turbo Manifold was designed to be a bolt-on manifold that will support most Internally Gated T2 frame turbo's. This manifold is able to use the SR20DET T25 Turbo outlet and retains A/C and Powersteering. Made with 304 sch 40 Stainless steel and a true merge collector, this hand-built piece will take your T28 frame to the maximum! ********************************************** *** For RB20/25/26... RB20/25/26 Openscroll Topmount DOC Race Open T4 Topmount available for RB20/25/26 -T4 Open Inlet Flange -Single MVR Wastegate flange standard The DOC Race RB Topmount Turbo manifold is for the more extreme setup looking for the potential limit of the vehicles engine. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit Larger Frame Turbo's. D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. ********************************************** *** RB20/25/26 Twinscroll Topmount** Application Notes: -Standard with Dual Tial MVS V-band wastegate outlets -Up to 4" downpipe Tubing specs: 1.660" OD, 1.380" ID, 0.140" wall rated for 1300hp The DOC Race Twinscroll Turbo manifold is similar to our Topmount manifold application. Our Twinscroll manifold is for maximum flow of your engine and turbo including the best possible spool and no limitations of the maximum output of your combination. DOC Race Twinscroll manifolds have had years of development in order to utilize the proper exhaust pulses to eliminate unwanted exhaust backpressure and vale overlap, in-turn giving you maximum airflow. This manifold is simply the most efficient available on the market! D.O.C. still applies our elaborate porting process to complement maximum flow within ALL of our manifolds. POST YOUR INQUIRIES HERE, PM, OR EMAIL US FOR OUR BLOWOUT HOLIDAY PRICES. Again Happy Holidays and HAPPY NEW YEAR to all fellow Zilvia members and their families from Performance Autoworks!!!

12-12-2012, 10:25 PM	#2
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	How much for the RB25 Top mount open scroll manifold? __________________

12-13-2012, 03:33 AM	#6
irritatedmax Zilvia FREAK! Join Date: Sep 2005 Location: Ashland, NE Age: 38 Posts: 1,359 Trader Rating: (20) Feedback Score: 20 reviews	SR T25 bottom mount price, please. __________________ BRICKHOUSE PRODUCTS IG @brickhouse_products

12-13-2012, 10:11 AM	#10
str84dapokie Leaky Injector Join Date: Dec 2009 Location: right here Age: 40 Posts: 119 Trader Rating: (2) Feedback Score: 2 reviews	KA24DE T25 Bottom-mount Turbo Manifold shipped to 08835 __________________ www.iDigsThat.com ....Check it out....

12-16-2012, 01:45 AM	#22
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 42 Posts: 1,490 Trader Rating: (81) Feedback Score: 81 reviews	Price for rb25 top mount twin scroll mani shipped to 96319 and 94535 __________________

12-12-2012, 10:35 PM	#3
801nismo104 Zilvia Member Join Date: May 2010 Location: Utah Posts: 233 Trader Rating: (8) Feedback Score: 8 reviews	price on sr20det t3 top mount and sr20det vband topmount please

12-13-2012, 01:43 AM	#4
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	Price for T3 top mount with 44mm and T2 bottom mount for SR20DET

12-13-2012, 02:10 AM	#5
91EfSi Leaky Injector Join Date: Dec 2011 Location: Salina, Kansas Age: 33 Posts: 140 Trader Rating: (4) Feedback Score: 4 reviews	Price for Rb20/25 Openscroll top mount as well.

12-13-2012, 07:23 AM	#7
1quk240 Banned from the Marketplace Join Date: Mar 2007 Location: Planet Earth Posts: 768 Trader Rating: (21) Feedback Score: 21 reviews	PM price for NA 2jz-ge t3 twinscroll shipped to 85301 please.

12-13-2012, 08:49 AM	#8
mechavore884 Zilvia Member Join Date: Dec 2007 Location: NOVA Posts: 218 Trader Rating: (6) Feedback Score: 6 reviews	price for KA24de T3 shipped to 23507

12-13-2012, 09:50 AM	#9
468POWER Zilvia Junkie Join Date: Sep 2010 Location: New York Posts: 408 Trader Rating: (9) Feedback Score: 9 reviews	Whoooweee - all PMs and posts replied to! Santa and his raindeer are gonna be a busy man these next two weeks if you guys all jump on this limited deal!

12-13-2012, 11:01 AM	#11
MrJdmEh2 Join Date: Nov 2010 Location: Boogie down BRONX Posts: 31 Trader Rating: (5) Feedback Score: 5 reviews	can i get a price for a sr20 t25 bottom mount to 11206 thanks.

12-13-2012, 03:31 PM	#12
ForeignMuscle Zilvia Addict Join Date: Feb 2012 Location: Ya momma's house Posts: 860 Trader Rating: (16) Feedback Score: 16 reviews	3" sr20det downpipe.. Is it just one piece or the two piece like Mazworx that replaces the bottom downpipe before the cat? Noone selling these has been able to give me any info on the downpipe. Paypal ready I need one TODAY. Thanks!

12-13-2012, 07:00 PM	#13
Theworm Leaky Injector Join Date: Oct 2011 Location: Iowa Age: 39 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Price for - KA24DE T3 Topmount Manifold shipped to 52001 Thanks

12-13-2012, 09:20 PM	#14
VATOCLOWN Leaky Injector Join Date: Jun 2009 Location: LA Posts: 133 Trader Rating: (3) Feedback Score: 3 reviews	price for front face manifold sr20det in t3 config if possible

12-13-2012, 09:29 PM	#15
AVmagneticZ Zilvia Member Join Date: Jun 2009 Location: Toronto, Canada Age: 36 Posts: 161 Trader Rating: (2) Feedback Score: 2 reviews	interested in the price of the t3 top mount and t28 oem location bottom mount manifold for sr20

12-14-2012, 06:08 AM	#16
468POWER Zilvia Junkie Join Date: Sep 2010 Location: New York Posts: 408 Trader Rating: (9) Feedback Score: 9 reviews	All PMs and posts replied to! Keep em coming.

12-14-2012, 06:52 AM	#17
ForeignMuscle Zilvia Addict Join Date: Feb 2012 Location: Ya momma's house Posts: 860 Trader Rating: (16) Feedback Score: 16 reviews	Except mine... Same exact thing I went through with a previous dealer. Ignored and eventually told "oh, doc didn't give any info on the downpipe.." Thanks anyway..

12-15-2012, 12:24 AM	#19
LOVERboy Zilvia Junkie Join Date: Jun 2008 Location: RC Posts: 464 Trader Rating: (4) Feedback Score: 4 reviews	Ka24de t3 top mount manifold shipped to 91730 please! PayPal ready!!! Sunny D.-

12-15-2012, 10:00 PM	#20
ForeignMuscle Zilvia Addict Join Date: Feb 2012 Location: Ya momma's house Posts: 860 Trader Rating: (16) Feedback Score: 16 reviews	Hey bud, no problem. Letting me know that to begin with would have been fine too. Take your time.

12-20-2012, 11:46 AM	#23
want2drag Join Date: Nov 2012 Location: maine Age: 37 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	Price on open scroll for rb25, and will it fill s14 with rb25 swap ?

12-25-2012, 09:56 AM	#24
468POWER Zilvia Junkie Join Date: Sep 2010 Location: New York Posts: 408 Trader Rating: (9) Feedback Score: 9 reviews	Merry Christmas fellow Zilvia members! Some of you must be very happy children when Santa delivered your shiny Doc Race manifolds! Not to worry for those that missed out - the UPS man can deliver the same shiny manifold to your door now if you PM or post on thread for our super low beat all blow out price!

12-30-2012, 06:56 PM	#25
Gripstarr Join Date: Dec 2012 Location: n.o. Age: 37 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	how much for the sr20det t4 front setting manifold shipped to 70452??

01-14-2013, 04:25 PM	#27
Riodcs Leaky Injector Join Date: Jul 2009 Location: Chicago Age: 33 Posts: 149 Trader Rating: (0) Feedback Score: 0 reviews	ka top manifold shipped to 60056 can u guys make ka intake manifold?

02-09-2013, 03:10 AM	#29
1gr8bar10der Post Whore! Join Date: Aug 2009 Location: Tampa/Bangkok Posts: 3,431 Trader Rating: (77) Feedback Score: 77 reviews	SR T25 bottom mount shipped to 33615 please.

02-09-2013, 08:52 AM	#30
ng26 Leaky Injector Join Date: Jan 2013 Location: I.E. Posts: 86 Trader Rating: (1) Feedback Score: 1 reviews	Ka top mount shipped to 80817?