Microtech EFI Standalone System - LOW PRICE! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tougefactory · 03-29-2005, 08:27 PM

Microtech EFI LT units offers real time tunability combined with quality that surpasses its price. Microtech is also known for its user friendly software,install, and tunability.

Another major advantage of the Microtech is it's ability to use the factory engine sensors.No more drilling,tapping,modifying or making special brackets to fit aftermarket sensors.A job that is compulsory with almost all other aftermarket management systems.

All units come with complete step by step wiring diagram and labelled wiring loom. Average person can install the whole kit in 3-4 hrs.

Microtech is MAP based so it eliminates the restrictive MAFS. Simply run the included line to a vacuum source to the main unit.

All units come with base map configured for its vehicle, which means no guesswork involved. Simply, after install, start the car and drive to the nearest dyno shop to get it tuned.

Microtech LT-series ECUs offer datalogging with text and graphical displays. Also comes with auxilliary inputs and outputs.

All LT's can be fined tuned either by the hand controller or by laptop making the system perfect for the 1st time tuner or the professional racer.

Microtech Website

LT8S - Microtech's Basic 4cyl ECU
Reg Price $949 Groupbuy Price $780Comes with 20psi built in MAP sensor, Wiring diagram, Manual, labeled wiring loom Click here for full Specs

LT10S - 4cyl ECU with upgrade options, 1 extra auxilliary input wire and 3 auxilliary outputs
Reg Price $1049 Groupbuy Price $860
20psi built in MAP sensor, Wiring diagram, Manual, labeled wiring loom
Upgrades - Internal 30psi upgrade $150, Internal 45psi upgrade $200

X4 Ignition Amplifier Box- Reg Price $180 Groupbuy Price $120
Used with LT10S unit, Eliminates stock ignitor, works with IGBT Ignition boost function which is available on LT10S as a standard feature.

Hand Controller - Reg Price $225 Groupbuy Price $140

Software and Cable - Reg Price $150 Groupbuy price $95

Our recommended setups

Under 20psi - LT8S & Software = $875 LT10S & X4 Ign Box & Software = $1075

30psi - LT10S & 30psi upgrade & Software = $1105

BEST Setup - LT10S & 30psi upgrade & X4 Ign Box & Software = $1255

We will be only accepting phone orders on this groupbuy. 847-412-1271
We currently have limited stock available for immediate shipping. Please call.
Usual wait time is 3-4 weeks (coming from Australia).

All non-stock orders will be paid in full for this groupbuy price. We will place order the following day, there is no waiting for bulk order.

Shipping is $15 to lower states, contact us for other areas.

This Groupbuy will end on April 15th.

www.TougeFactory.com

ghostuss · 03-29-2005, 08:37 PM

Hmm not sure about this company but Standalone for little over 1g is a killer price. I would jump on this if I had got my motor done with turbo kit hehe. I don't want to jump ahead of my plan =).

brokeAs240sx · 03-29-2005, 10:05 PM

Checked the site, doesn't seem to be a specific base map for individual vehicles but generic base maps for each type of engine (4 cyl, 6 cyl, etc).

Also, considering there are no plug-in harnesses, it would take a while (even w/ an fsm) to do the wiring, longer than 3-4 hrs for the "average person" imho.

Has anyone set this up on a 240sx before? more specifically, ka24et?

03-29-2005, 08:27 PM	#1
tougefactory Zilvia.net Advertiser Join Date: Oct 2003 Location: Chicago, IL Posts: 1,511 Trader Rating: (27) Feedback Score: 27 reviews	Microtech EFI Standalone System - LOW PRICE! Microtech EFI LT units offers real time tunability combined with quality that surpasses its price. Microtech is also known for its user friendly software,install, and tunability. Another major advantage of the Microtech is it's ability to use the factory engine sensors.No more drilling,tapping,modifying or making special brackets to fit aftermarket sensors.A job that is compulsory with almost all other aftermarket management systems. All units come with complete step by step wiring diagram and labelled wiring loom. Average person can install the whole kit in 3-4 hrs. Microtech is MAP based so it eliminates the restrictive MAFS. Simply run the included line to a vacuum source to the main unit. All units come with base map configured for its vehicle, which means no guesswork involved. Simply, after install, start the car and drive to the nearest dyno shop to get it tuned. Microtech LT-series ECUs offer datalogging with text and graphical displays. Also comes with auxilliary inputs and outputs. All LT's can be fined tuned either by the hand controller or by laptop making the system perfect for the 1st time tuner or the professional racer. Microtech Website LT8S - Microtech's Basic 4cyl ECU Reg Price $949 Groupbuy Price $780Comes with 20psi built in MAP sensor, Wiring diagram, Manual, labeled wiring loom Click here for full Specs LT10S - 4cyl ECU with upgrade options, 1 extra auxilliary input wire and 3 auxilliary outputs Reg Price $1049 Groupbuy Price $860 20psi built in MAP sensor, Wiring diagram, Manual, labeled wiring loom Upgrades - Internal 30psi upgrade $150, Internal 45psi upgrade $200 X4 Ignition Amplifier Box- Reg Price $180 Groupbuy Price $120 Used with LT10S unit, Eliminates stock ignitor, works with IGBT Ignition boost function which is available on LT10S as a standard feature. Hand Controller - Reg Price $225 Groupbuy Price $140 Software and Cable - Reg Price $150 Groupbuy price $95 Our recommended setups Under 20psi - LT8S & Software = $875 LT10S & X4 Ign Box & Software = $1075 30psi - LT10S & 30psi upgrade & Software = $1105 BEST Setup - LT10S & 30psi upgrade & X4 Ign Box & Software = $1255 We will be only accepting phone orders on this groupbuy. 847-412-1271 We currently have limited stock available for immediate shipping. Please call. Usual wait time is 3-4 weeks (coming from Australia). All non-stock orders will be paid in full for this groupbuy price. We will place order the following day, there is no waiting for bulk order. Shipping is $15 to lower states, contact us for other areas. This Groupbuy will end on April 15th. www.TougeFactory.com

03-29-2005, 08:37 PM	#2
ghostuss Zilvia FREAK! Join Date: Jan 2004 Location: San Diego/San Francisco Age: 38 Posts: 1,337 Trader Rating: (0) Feedback Score: 0 reviews	Hmm not sure about this company but Standalone for little over 1g is a killer price. I would jump on this if I had got my motor done with turbo kit hehe. I don't want to jump ahead of my plan =). __________________ 96 all suspension s14 SOLD 90 s13 coupe - SOLD Currently rocking 2002 BMW M3 w/ custom suspension. ButtonWillow, CA entire circuit drift/grip event by shock drifting spot for sale. Take over my spot for $150 only.

03-29-2005, 10:05 PM	#3
brokeAs240sx Nissanaholic! Join Date: May 2004 Location: Southern California Posts: 1,917 Trader Rating: (40) Feedback Score: 40 reviews	Checked the site, doesn't seem to be a specific base map for individual vehicles but generic base maps for each type of engine (4 cyl, 6 cyl, etc). Also, considering there are no plug-in harnesses, it would take a while (even w/ an fsm) to do the wiring, longer than 3-4 hrs for the "average person" imho. Has anyone set this up on a 240sx before? more specifically, ka24et?