Intercooler Kit Group Buy - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kings_blend · 05-17-2005, 04:27 PM

***S13 full aluminum piping kits are now available for USD $485.
There is also a new design of the original s13 kit with rubber pipes. Pic is attatched bellow.***

New install pics on page 2.

Hey guys I know there are a lot of you looking for intercooler kits for a good price so I managed to dig some up. KGCM2 Infinity Performance in Australia is offering intercooler kits for the following at the following prices:

S13 = USD $450

S14/S15 = USD $470

Skyline = USD$460

WRX = USD $480

These intercoolers are bar and plate.
High flow power handle supported up to 700hp
Big inlet 76mm or 3"
High efficiency big core with internal fins
Low pressure drop 0.2psi at 15psi 80 psi tested

Dimensions:
Core Length : 24" (600mm)
Core Height: 12" (300mm)
Core Thickness: 3" (76mm)
Inlet Size: 3" o/d (76mm)
Outlet Size: 3" o/d (76mm)
"End to End" Length: 32" (800mm)
Heat Exchange: 72C - 24C

Shipping will be around $35 to US and $89 to International including Canada and will take between a week to two weeks depending on the location.

The only thing about the S13 piping is that it comes with plastic/rubber pipes from the intercooler (just like stock side mount pipes) but the coldpipe is aluminum. The rest of the kits are aluminum. Kits do not come with hotpipe, but those are easy to make/get. Couplers and clamps are included as well.
The S13 full aluminum piping kits are sold out right now and probably wont be in stock for a month or so. But the plastic/rubber piping has been tested and they said there was no HP difference in the numbers they got between aluminum and plastic/rubber pipes.

NOW FOR THE PICS!!!

S13 kit

S14/S15 kit

Skyline kit

WRX kit

The pics are from their website. This is an open group buy, and will be open for 30 days. After that prices go back up. If you have any questions please PM me or email me at [email protected] <(fastest way to reach me)

GOOD LUCK!

infinitexsound · 05-17-2005, 05:34 PM

are u from ca?

Ritz S14 · 05-17-2005, 05:44 PM

Are these for the KA or SR?

kings_blend · 05-17-2005, 06:22 PM

Im in canada, but the kits are coming from Australia.

These are for sr, but if you think about it, the ka and sr both have the throttle body in the same area, so the cold pipe might work, and it dosnt come with a hotpipe so you can get one from HT or fab one up. The kit isnt very expensive so it could even be altered to work for the ka.

TOMY · 05-17-2005, 08:50 PM

are these in stock or are er going to wait a year to get them?

sr240mike · 05-17-2005, 09:46 PM

Kgcm2 sells them for the exact same price on ebay, so where's the groupbuy deal?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
I can understand if that price is temporary just to get some positive feedback, but why buy this kit if there are other cheap alternatives for $30 more that include the hotpipe, all aluminum piping, silicone couplers, and t-bolt clamps?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

kings_blend · 05-18-2005, 12:39 AM

these kits are in stock.

I didnt know they sell them on ebay as well. But i do know that they just started selling in north america. Maybe its just a way to get noticed. The kit you found on ebay from the other seller is just a generic one. The kit KGCM2 Infinity Performance sells is an actual shop run in Australia. Who would you turst more with an intercooler kit? www.kgcm2.com is there website if you would like to review it for yourself. A lot of people are uncomfortable shopping on ebay. This way you dont have to. As soon as these kits start selling in north america the price will go up.

ballr858 · 05-18-2005, 06:51 AM

i'm most likely in.

AzNCmB · 05-18-2005, 06:58 AM

does it come with regular hose clamps or t-bolt clamps?

kings_blend · 05-18-2005, 12:19 PM

Quote:

Originally Posted by AzNCmB

does it come with regular hose clamps or t-bolt clamps?

They come with regular hose clamps.

ballr858 · 05-19-2005, 02:32 PM

anybody else have any opinions on the plastic hoses?

240KAT · 05-19-2005, 05:34 PM

how much for just the core?

240KAT · 05-19-2005, 05:34 PM

...with endtanks, s13

kings_blend · 05-19-2005, 09:22 PM

I will let you guys know ASAP when the s13 aluminum piping kits will be available.

240KAT the core alone without piping is $290 US with free shipping in the US.

Let me know if I can be of any more help.

ballr858 · 05-21-2005, 10:14 AM

so should we be ordering directly from their site? aren't those ones on ebay the exact same ones???

kings_blend · 05-21-2005, 10:26 AM

Quote:

Originally Posted by ballr858

so should we be ordering directly from their site? aren't those ones on ebay the exact same ones???

The ebay ones look to be the same, if you want to order, just PM me with your shipping address so I can calculate shipping (might be a little cheaper) as well as what kit you want, and your payment method, and I will email or Pm you all the details and all you gotta do is send payment and your IC kit will be shipped out on the following wednesday.

parker · 05-21-2005, 01:27 PM

is it possible just to get the cold pipe? i need a S14 cold pipe

kings_blend · 05-22-2005, 12:48 AM

Quote:

Originally Posted by parker

is it possible just to get the cold pipe? i need a S14 cold pipe

No sorry dude.

richardxfeng · 05-22-2005, 02:28 PM

Please let me know when the S13 kit is available, [email protected]
Also i have a question, Can the S13 kit fit in both pop up lights and Silvia lights style?
Thanks!

kings_blend · 05-22-2005, 02:36 PM

Quote:

Originally Posted by richardxfeng

Please let me know when the S13 kit is available, [email protected]
Also i have a question, Can the S13 kit fit in both pop up lights and Silvia lights style?
Thanks!

The kit is available right now if you wish to purchase. The kit fits on the popup lights perfectly, but for the silivia conversion, you will need to modify the top bracket.

PANGES · 05-25-2005, 12:02 AM

so the skyline kit is for an RB into an s13? or is it just for a skyline?

blk240sx · 05-25-2005, 01:27 AM

so you only have the s13 kits with the plastic piping??? alsoi am in canada, edmonton to be exact my postal code is t6j-4k5, What would it cost to have an s13 kit shipped here!

lotusdrift · 05-26-2005, 10:47 AM

any chance of us getting a close up of the internal core and of the exterior fins.

kings_blend · 05-26-2005, 11:09 AM

fukuokas13, blk240sx, and PNAGES check your PM's guys.

There is a pic of the core in my first post, as for a pic of the inside I will get back to you on that one.

lotusdrift · 05-26-2005, 11:33 AM

I want to see the actual internal core design (the charge air flow path, fin design, header design, etc), the area inside the endtanks...you should be able to get a decent picture through the endtanks.

I'd also like to see a close up of the fin design in the ambient air path (face of the core).

Thanks, if you want to email them to me it is [email protected]

TheSpeedFactor · 05-26-2005, 11:59 AM

i would love to see the actual flow, psi drop and heat transfer numbers you guys see on this. i know who makes them and there are quite a few different numbers out there for it. for you guys running stock or close to it boost you will see heavy pressure drop. FOr the price though i guess you can't go wrong.

TOMY · 05-26-2005, 02:01 PM

i would like to get feedback of people who actually have this. I'm going Ka-T and i was wondering which pipes i could and could not use. Also.... could the S14 kit be a better option. I like the polished toobing!

kings_blend · 05-26-2005, 08:56 PM

Quote:

Originally Posted by lotusdrift

I want to see the actual internal core design (the charge air flow path, fin design, header design, etc), the area inside the endtanks...you should be able to get a decent picture through the endtanks.

I'd also like to see a close up of the fin design in the ambient air path (face of the core).

Thanks, if you want to email them to me it is [email protected]

Pic has been added at your request. Go up to the first post to see.

kings_blend · 05-26-2005, 09:00 PM

Quote:

Originally Posted by TOMY

i would like to get feedback of people who actually have this. I'm going Ka-T and i was wondering which pipes i could and could not use. Also.... could the S14 kit be a better option. I like the polished toobing!

The s13 kit is also available with aluminum piping. The s14 kit might need a little fabbing but for the price it dosnt really matter. Note that the s13 hotside piping is not all one diameter. See the pic up top.

richardxfeng · 05-27-2005, 01:58 AM

So did you find out if the S13 kit will fit on both head lights style? And how much more for the kit with alumnium piping? Thanks!

05-17-2005, 05:34 PM	#2
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 41 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	are u from ca? __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

05-17-2005, 09:46 PM	#6
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	Kgcm2 sells them for the exact same price on ebay, so where's the groupbuy deal? http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 I can understand if that price is temporary just to get some positive feedback, but why buy this kit if there are other cheap alternatives for $30 more that include the hotpipe, all aluminum piping, silicone couplers, and t-bolt clamps? http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 __________________ TWO IN THE COOT, ONE IN THE POOT

05-19-2005, 05:34 PM	#12
240KAT Zilvia Addict Join Date: Jul 2003 Location: Columbia, MD Age: 37 Posts: 797 Trader Rating: (0) Feedback Score: 0 reviews	how much for just the core? __________________ Drew

05-19-2005, 05:34 PM	#13
240KAT Zilvia Addict Join Date: Jul 2003 Location: Columbia, MD Age: 37 Posts: 797 Trader Rating: (0) Feedback Score: 0 reviews	...with endtanks, s13 __________________ Drew

05-19-2005, 09:22 PM	#14
kings_blend Leaky Injector Join Date: Jun 2004 Location: WINDSOR Age: 39 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	I will let you guys know ASAP when the s13 aluminum piping kits will be available. 240KAT the core alone without piping is $290 US with free shipping in the US. Let me know if I can be of any more help. Last edited by kings_blend; 05-19-2005 at 10:27 PM..

05-17-2005, 05:44 PM	#3
Ritz S14 Post Whore! Join Date: Jul 2004 Location: C A L I F O R N I A Age: 42 Posts: 3,586 Trader Rating: (0) Feedback Score: 0 reviews	Are these for the KA or SR?

05-17-2005, 06:22 PM	#4
kings_blend Leaky Injector Join Date: Jun 2004 Location: WINDSOR Age: 39 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	Im in canada, but the kits are coming from Australia. These are for sr, but if you think about it, the ka and sr both have the throttle body in the same area, so the cold pipe might work, and it dosnt come with a hotpipe so you can get one from HT or fab one up. The kit isnt very expensive so it could even be altered to work for the ka.

05-17-2005, 08:50 PM	#5
TOMY BANNED Join Date: Mar 2003 Location: Chicago Posts: 237 Trader Rating: (0) Feedback Score: 0 reviews	are these in stock or are er going to wait a year to get them?

05-18-2005, 12:39 AM	#7
kings_blend Leaky Injector Join Date: Jun 2004 Location: WINDSOR Age: 39 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	these kits are in stock. I didnt know they sell them on ebay as well. But i do know that they just started selling in north america. Maybe its just a way to get noticed. The kit you found on ebay from the other seller is just a generic one. The kit KGCM2 Infinity Performance sells is an actual shop run in Australia. Who would you turst more with an intercooler kit? www.kgcm2.com is there website if you would like to review it for yourself. A lot of people are uncomfortable shopping on ebay. This way you dont have to. As soon as these kits start selling in north america the price will go up.

05-18-2005, 06:51 AM	#8
ballr858 Zilvia Member Join Date: Jun 2004 Location: San Diego Posts: 214 Trader Rating: (3) Feedback Score: 3 reviews	i'm most likely in.

05-18-2005, 06:58 AM	#9
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 39 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	does it come with regular hose clamps or t-bolt clamps?

05-19-2005, 02:32 PM	#11
ballr858 Zilvia Member Join Date: Jun 2004 Location: San Diego Posts: 214 Trader Rating: (3) Feedback Score: 3 reviews	anybody else have any opinions on the plastic hoses?

05-21-2005, 10:14 AM	#15
ballr858 Zilvia Member Join Date: Jun 2004 Location: San Diego Posts: 214 Trader Rating: (3) Feedback Score: 3 reviews	so should we be ordering directly from their site? aren't those ones on ebay the exact same ones???

05-21-2005, 01:27 PM	#17
parker Join Date: Apr 2003 Location: nu jeruuu Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	is it possible just to get the cold pipe? i need a S14 cold pipe __________________ i remember one time i did this thing which was so amazing that this other guy did it too.

05-22-2005, 02:28 PM	#19
richardxfeng Zilvia Addict Join Date: Jan 2003 Location: China Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	Please let me know when the S13 kit is available, [email protected] Also i have a question, Can the S13 kit fit in both pop up lights and Silvia lights style? Thanks!

05-25-2005, 12:02 AM	#21
PANGES Zilvia Junkie Join Date: Apr 2005 Location: Nor Cal Posts: 591 Trader Rating: (0) Feedback Score: 0 reviews	so the skyline kit is for an RB into an s13? or is it just for a skyline? __________________ I can't, but Chris Brown sure can.

05-25-2005, 01:27 AM	#22
blk240sx Join Date: Apr 2005 Location: edmonton AB Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	so you only have the s13 kits with the plastic piping??? alsoi am in canada, edmonton to be exact my postal code is t6j-4k5, What would it cost to have an s13 kit shipped here! __________________ Image too large. Removed by Moderator.

05-26-2005, 10:47 AM	#23
lotusdrift Zilvia Member Join Date: Jul 2003 Location: norfolk va Age: 42 Posts: 211 Trader Rating: (0) Feedback Score: 0 reviews	any chance of us getting a close up of the internal core and of the exterior fins.

05-26-2005, 11:09 AM	#24
kings_blend Leaky Injector Join Date: Jun 2004 Location: WINDSOR Age: 39 Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	fukuokas13, blk240sx, and PNAGES check your PM's guys. There is a pic of the core in my first post, as for a pic of the inside I will get back to you on that one.

05-26-2005, 11:33 AM	#25
lotusdrift Zilvia Member Join Date: Jul 2003 Location: norfolk va Age: 42 Posts: 211 Trader Rating: (0) Feedback Score: 0 reviews	I want to see the actual internal core design (the charge air flow path, fin design, header design, etc), the area inside the endtanks...you should be able to get a decent picture through the endtanks. I'd also like to see a close up of the fin design in the ambient air path (face of the core). Thanks, if you want to email them to me it is [email protected]

05-26-2005, 11:59 AM	#26
TheSpeedFactor Leaky Injector Join Date: Dec 2003 Location: Northern Va Age: 42 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	i would love to see the actual flow, psi drop and heat transfer numbers you guys see on this. i know who makes them and there are quite a few different numbers out there for it. for you guys running stock or close to it boost you will see heavy pressure drop. FOr the price though i guess you can't go wrong. __________________

05-26-2005, 02:01 PM	#27
TOMY BANNED Join Date: Mar 2003 Location: Chicago Posts: 237 Trader Rating: (0) Feedback Score: 0 reviews	i would like to get feedback of people who actually have this. I'm going Ka-T and i was wondering which pipes i could and could not use. Also.... could the S14 kit be a better option. I like the polished toobing!

05-27-2005, 01:58 AM	#30
richardxfeng Zilvia Addict Join Date: Jan 2003 Location: China Posts: 675 Trader Rating: (0) Feedback Score: 0 reviews	So did you find out if the S13 kit will fit on both head lights style? And how much more for the kit with alumnium piping? Thanks!