Group Buy: All New Custom Front Mount Intercoolers - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 05-29-2005, 06:48 PM

ok, we are doing a group buy on these intercoolers for few reasons. One they fit up in your front end without having to trim your bumper support.
Two, they have been track tested on 400 HP cars, which means they are the perfect size for people with modded, but not super crazy HP engines.
The actual core size without the end tanks is 20X6X3 . Its the perfect size for quick throttle response.
We will be working on piping kits for them as well for specific applications.
This is a 1 week special at $175 shipped for each and we need
10 people. Repeat core size is 20x6x3 , pic actually makes it look small. hahahhhaha

zero.counter · 05-29-2005, 07:08 PM

If that is $160 shipped, I am in!

reccakun08 · 05-29-2005, 07:26 PM

definately let me know about the core and piping for s13 with redtop motor. The other intercooler groupbuy looks really nice esp with the sizing of the core and aluminum piping. If you can provide a cheaper route there maybe a lot more interest. thanks.

drift freaq · 05-29-2005, 07:50 PM

Quote:

Originally Posted by reccakun08

definately let me know about the core and piping for s13 with redtop motor. The other intercooler groupbuy looks really nice esp with the sizing of the core and aluminum piping. If you can provide a cheaper route there maybe a lot more interest. thanks.

I will work on piping, right now its just the core.
as far as shipping goes it should not be more than $10-15. per core

zero.counter · 05-29-2005, 07:59 PM

Quote:

Originally Posted by drift freaq

I will work on piping, right now its just the core.
as far as shipping goes it should not be more than $10-15. per core

Well, in that case, if you can do $170 shipped, count me in on the GB.

Quick240 · 05-30-2005, 11:51 AM

What's the size on the inlet and outlet?

decksy · 05-30-2005, 03:39 PM

when do you think piping will be available?

Andrew85cm · 05-30-2005, 05:32 PM

I am probably down for this do you take paypal? How much is the shipping to 27265?
~ANDREW~

autobahNESSA · 06-01-2005, 02:00 PM

Does this come with endtanks?
Is it bar and plate, or tube fin?

Are these similar to the ones on ebay for the 160-180 price range?

autobahNESSA · 06-01-2005, 04:08 PM

Is this the same one your getting?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
Almost same dimensions, and claims 400hp also.
If so do you have test information on it. temp changes, psi drop etc.

240KAT · 06-01-2005, 05:20 PM

Will this work with piping from other kits. either way, im in on this.

nismostate · 06-01-2005, 11:07 PM

im in too if it's still going.

drift freaq · 06-01-2005, 11:40 PM

Quote:

Originally Posted by 240KAT

Will this work with piping from other kits. either way, im in on this.

yes it will .

drift freaq · 06-01-2005, 11:57 PM

ok I am going to try and answer all questions. the inlet and outlet size are 2.5 inches. do not let people tell you that you need a 3 inch inlet or outlet to flow horsepower. That is marketing . For the kind of horsepowers numbers this intercooler can handle the inlet and outlet are perfect. On the 400 hp tip its been dyno'd at that and like I said in the opening of this thread one of these is on a 400hp car. I would say that it could run all day long around 350-375 without breaking a sweat. no I do not have pressure drop numbers. I can try and get some. It is going on a Formula D drivers car that also competes in D1. It is bar and plate and if you look at the pic yes the end tanks are there . I listed the core measurements minus the endtanks cause thats the main area you get your charge cooling from.
The pic of the one on ebay is similar, but I cannot say they are the same.
I will say you take your chances on ebay. As far as vendors go.
a quicklist of people so far reads as follows.
zero counter
Andrew85cm
240kat
nismostate
marco69

not bad five more people and this will rock. as far as piping goes I am indeed working on a complete kit with piping and hoses. though the kit price will be a lot more than the individual coolers.
pricing is officially now $170 shipped plus $5 for paypal.

Marco69 · 06-02-2005, 10:10 AM

Count me in for one of these intercoolers.
Can you give me an estimate of how long it would take to get mine? Also, do you have a timeframe for the piping kit release and pricing?

Thanks,
Marco

drift freaq · 06-02-2005, 06:19 PM

Quote:

Originally Posted by Marco69

Count me in for one of these intercoolers.
Can you give me an estimate of how long it would take to get mine? Also, do you have a timeframe for the piping kit release and pricing?

Thanks,
Marco

once we have ten people the coolers will be picked up and ship now seeing as I did this as a one week deal we have around 2-4 days more before it closes so people get on board. As far as piping and hoses go I am working on it and I should have a piping and hose set uo in around a 1 1/2 - 2 weeks . I will be polished mandrel bent aluminum piping.

nismostate · 06-02-2005, 07:05 PM

any idea on how much the pipings will be?

drift freaq · 06-02-2005, 08:41 PM

Quote:

Originally Posted by nismostate

any idea on how much the pipings will be?

not at this time, still work out a few of the details.

vinhisbored · 06-02-2005, 10:03 PM

hm.. i might be interested if this comes with piping/couplings.. if so.. throw out a price, and i'll let you know

Andrew85cm · 06-02-2005, 11:41 PM

Well pm me when you have the ten people or post on here so I can send you the money as long as im promised one I am definately in on this. I dont want to send if not enough people get on board.
~ANDREW~

drifter_e · 06-03-2005, 01:29 AM

is there any way we can just get the piping kit????

autobahNESSA · 06-03-2005, 12:01 PM

Do you have any photos of these IC's? Also is their a way they can be anodized?

drift freaq · 06-03-2005, 09:50 PM

Quote:

Originally Posted by bayarea240

Do you have any photos of these IC's? Also is their a way they can be anodized?

ok for some reason I accidently deleted the pic, but it is back up know at the beginning of the thread. Yes you could have it anodized, no we are not going to anodize them.

drift freaq · 06-06-2005, 01:48 PM

ok guys, since I did go out of town over the official week end of the group buy. I will extend it to this wed to try and get the extra people on board. I also might talk to the supplier and see if I can do an initial at 8 people.

Andrew85cm · 06-07-2005, 12:17 AM

Just tell me when to send the money. Now if someone backs out and I send the money I assume you will just send it back? Paypal will be sent as soon as 10 are reached this sounds like deal. How is this intercooler which is smaller than a lot rated to 400 hp when some that are 5 inches longer are only rated to 300. I guess it would just be less efficient up there.

NZO · 06-07-2005, 05:43 PM

How much boost was the 400hp car running? I'm going for ~350 wheel and I have a huge novelty size Hybrid fmic (24x11.5x3) which is probably total overkill but it came with the car. Considering this instead when you guys come out with the +piping version.

drift freaq · 06-08-2005, 08:27 PM

ok I talked to my supplier and we can start this at the 5 people that are in. so lets start collecting so we can get this taken care of. paypal is [email protected]

DrifterProdigy85 · 06-12-2005, 10:59 AM

Is this GB still going? Im definitly buying an intercooler this week and want to buy this one. Im sending a PM.

drift freaq · 06-12-2005, 12:07 PM

ok guys, the door is still open for late comers. I was putting a time frame on it because some people wanted it to move quickly but they are lagging.
so there is still room for another 5 people who want in.

trsilvias13 · 06-12-2005, 01:17 PM

can i just get in for the piping? im interested if i can just get the piping kit. also let me know how much piping is avalible and which car and motor is it for? ka or sr? s13 or s14? im interested in s14 with ka, and put up price too.

Thanks

05-29-2005, 06:48 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Group Buy: All New Custom Front Mount Intercoolers ok, we are doing a group buy on these intercoolers for few reasons. One they fit up in your front end without having to trim your bumper support. Two, they have been track tested on 400 HP cars, which means they are the perfect size for people with modded, but not super crazy HP engines. The actual core size without the end tanks is 20X6X3 . Its the perfect size for quick throttle response. We will be working on piping kits for them as well for specific applications. This is a 1 week special at $175 shipped for each and we need 10 people. Repeat core size is 20x6x3 , pic actually makes it look small. hahahhhaha __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 06-03-2005 at 09:49 PM..

05-30-2005, 03:39 PM	#7
decksy Zilvia Junkie Join Date: Mar 2004 Location: Orange, Ca Posts: 418 Trader Rating: (0) Feedback Score: 0 reviews	when do you think piping will be available? __________________ gettin' it sidewayzzz

06-01-2005, 02:00 PM	#9
autobahNESSA Zilvia FREAK! Join Date: Aug 2002 Location: Milpitas/Irvine, CA Posts: 1,257 Trader Rating: (3) Feedback Score: 3 reviews	Does this come with endtanks? Is it bar and plate, or tube fin? Are these similar to the ones on ebay for the 160-180 price range? __________________

06-01-2005, 04:08 PM	#10
autobahNESSA Zilvia FREAK! Join Date: Aug 2002 Location: Milpitas/Irvine, CA Posts: 1,257 Trader Rating: (3) Feedback Score: 3 reviews	Is this the same one your getting? http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 Almost same dimensions, and claims 400hp also. If so do you have test information on it. temp changes, psi drop etc. __________________

06-01-2005, 05:20 PM	#11
240KAT Zilvia Addict Join Date: Jul 2003 Location: Columbia, MD Age: 37 Posts: 797 Trader Rating: (0) Feedback Score: 0 reviews	Will this work with piping from other kits. either way, im in on this. __________________ Drew

05-29-2005, 07:08 PM	#2
zero.counter Nissanaholic! Join Date: Jun 2003 Location: At work Posts: 2,003 Trader Rating: (0) Feedback Score: 0 reviews	If that is $160 shipped, I am in!

05-29-2005, 07:26 PM	#3
reccakun08 Zilvia FREAK! Join Date: Jun 2003 Location: Rockville, Maryland Age: 39 Posts: 1,090 Trader Rating: (5) Feedback Score: 5 reviews	definately let me know about the core and piping for s13 with redtop motor. The other intercooler groupbuy looks really nice esp with the sizing of the core and aluminum piping. If you can provide a cheaper route there maybe a lot more interest. thanks.

05-30-2005, 11:51 AM	#6
Quick240 Join Date: Dec 2002 Location: Omaha, NE Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	What's the size on the inlet and outlet?

05-30-2005, 05:32 PM	#8
Andrew85cm Leaky Injector Join Date: Dec 2003 Location: High Point, NC Age: 38 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	I am probably down for this do you take paypal? How much is the shipping to 27265? ~ANDREW~

06-01-2005, 11:07 PM	#12
nismostate Banned from the Marketplace Join Date: Jan 2004 Location: Memphis, TN Posts: 266 Trader Rating: (3) Feedback Score: 3 reviews	im in too if it's still going.

06-01-2005, 11:57 PM	#14
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	ok I am going to try and answer all questions. the inlet and outlet size are 2.5 inches. do not let people tell you that you need a 3 inch inlet or outlet to flow horsepower. That is marketing . For the kind of horsepowers numbers this intercooler can handle the inlet and outlet are perfect. On the 400 hp tip its been dyno'd at that and like I said in the opening of this thread one of these is on a 400hp car. I would say that it could run all day long around 350-375 without breaking a sweat. no I do not have pressure drop numbers. I can try and get some. It is going on a Formula D drivers car that also competes in D1. It is bar and plate and if you look at the pic yes the end tanks are there . I listed the core measurements minus the endtanks cause thats the main area you get your charge cooling from. The pic of the one on ebay is similar, but I cannot say they are the same. I will say you take your chances on ebay. As far as vendors go. a quicklist of people so far reads as follows. zero counter Andrew85cm 240kat nismostate marco69 not bad five more people and this will rock. as far as piping goes I am indeed working on a complete kit with piping and hoses. though the kit price will be a lot more than the individual coolers. pricing is officially now $170 shipped plus $5 for paypal. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 06-02-2005 at 06:15 PM..

06-02-2005, 10:10 AM	#15
Marco69 Join Date: May 2005 Location: South Florida Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Count me in for one of these intercoolers. Can you give me an estimate of how long it would take to get mine? Also, do you have a timeframe for the piping kit release and pricing? Thanks, Marco

06-02-2005, 07:05 PM	#17
nismostate Banned from the Marketplace Join Date: Jan 2004 Location: Memphis, TN Posts: 266 Trader Rating: (3) Feedback Score: 3 reviews	any idea on how much the pipings will be?

06-02-2005, 10:03 PM	#19
vinhisbored Zilvia FREAK! Join Date: Apr 2005 Location: socal Posts: 1,359 Trader Rating: (15) Feedback Score: 15 reviews	hm.. i might be interested if this comes with piping/couplings.. if so.. throw out a price, and i'll let you know

06-02-2005, 11:41 PM	#20
Andrew85cm Leaky Injector Join Date: Dec 2003 Location: High Point, NC Age: 38 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Well pm me when you have the ten people or post on here so I can send you the money as long as im promised one I am definately in on this. I dont want to send if not enough people get on board. ~ANDREW~

06-03-2005, 01:29 AM	#21
drifter_e Leaky Injector Join Date: Feb 2004 Location: ct Posts: 133 Trader Rating: (0) Feedback Score: 0 reviews	is there any way we can just get the piping kit????

06-03-2005, 12:01 PM	#22
autobahNESSA Zilvia FREAK! Join Date: Aug 2002 Location: Milpitas/Irvine, CA Posts: 1,257 Trader Rating: (3) Feedback Score: 3 reviews	Do you have any photos of these IC's? Also is their a way they can be anodized? __________________

06-06-2005, 01:48 PM	#24
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	ok guys, since I did go out of town over the official week end of the group buy. I will extend it to this wed to try and get the extra people on board. I also might talk to the supplier and see if I can do an initial at 8 people. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

06-07-2005, 12:17 AM	#25
Andrew85cm Leaky Injector Join Date: Dec 2003 Location: High Point, NC Age: 38 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Just tell me when to send the money. Now if someone backs out and I send the money I assume you will just send it back? Paypal will be sent as soon as 10 are reached this sounds like deal. How is this intercooler which is smaller than a lot rated to 400 hp when some that are 5 inches longer are only rated to 300. I guess it would just be less efficient up there.

06-07-2005, 05:43 PM	#26
NZO Zilvia FREAK! Join Date: Mar 2002 Location: Reno, NV Age: 41 Posts: 1,424 Trader Rating: (0) Rides Gallery: NZO Feedback Score: 0 reviews	How much boost was the 400hp car running? I'm going for ~350 wheel and I have a huge novelty size Hybrid fmic (24x11.5x3) which is probably total overkill but it came with the car. Considering this instead when you guys come out with the +piping version. __________________ sentinelguild.com/nzo/PFCDB/

06-08-2005, 08:27 PM	#27
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	ok I talked to my supplier and we can start this at the 5 people that are in. so lets start collecting so we can get this taken care of. paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

06-12-2005, 10:59 AM	#28
DrifterProdigy85 Leaky Injector Join Date: Aug 2004 Location: Glen Rock, PA Age: 38 Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	Is this GB still going? Im definitly buying an intercooler this week and want to buy this one. Im sending a PM. __________________ 1995 Nissan 240sx RB25DET

06-12-2005, 12:07 PM	#29
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	ok guys, the door is still open for late comers. I was putting a time frame on it because some people wanted it to move quickly but they are lagging. so there is still room for another 5 people who want in. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

06-12-2005, 01:17 PM	#30
trsilvias13 Nissanaholic! Join Date: Nov 2001 Posts: 1,994 Trader Rating: (5) Feedback Score: 5 reviews	can i just get in for the piping? im interested if i can just get the piping kit. also let me know how much piping is avalible and which car and motor is it for? ka or sr? s13 or s14? im interested in s14 with ka, and put up price too. Thanks