Small Questions Thread (SEARCH FIRST! Use this instead of making NEW threads) - Page 344 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

chiboy002 · 04-03-2012, 01:33 PM

Quote:

Originally Posted by Renelovesnike

Stuck between BRIDE FG rails or nagisa..... i have a zeta 2 and was wondering with of the two sat lower!!!!

bride FG are angled back more than nagisa rails
both sit at the same height, more or less. you won't notice much difference

there was a very good thread on here, search it. i believe it was bride vs nagisa rails or something

JasianBlazin · 04-03-2012, 03:45 PM

is the s14 rear bumper held on by plugs? I popped my trunk today and saw that all the holes have nothing in them :/

e5s4y · 04-03-2012, 04:50 PM

Quote:

Originally Posted by blksylv

wheres a good place online to find metal t fittings for vacuum lines?

why online? just go to ace hardware

MeGusta.jpeg · 04-03-2012, 05:47 PM

i got a problem.

today i let my car idle for a while while working on something, after 10-15 mins the car started idle rough and had a strong smell of gas. first time this happened, the car has been sitting for a while but i usually start it and let it idle every other day or so. its a stock dual cam KA.

blessedhellrider · 04-03-2012, 05:52 PM

busted fuel line ?

PeaceOnesxWai · 04-03-2012, 08:04 PM

So i picked up a set of Volk RE30s for a low low price.. problem is i only have 3 wheels and they are 19x10s +22 front and 19x11s +25 rear. ..

What should i do? Sell them or order the 4th wheel and run them on my Supermade s13?

KiLLeR2001 · 04-03-2012, 08:30 PM

Quote:

Originally Posted by PeaceOnesxWai

So i picked up a set of Volk RE30s for a low low price.. problem is i only have 3 wheels and they are 19x10s +22 front and 19x11s +25 rear. ..

What should i do? Sell them or order the 4th wheel and run them on my Supermade s13?

This is something you should have thought about before picking them up. Personally, I think 19 inch wheels on an S13 is retarded.

PeaceOnesxWai · 04-03-2012, 08:41 PM

Quote:

Originally Posted by KiLLeR2001

This is something you should have thought about before picking them up. Personally, I think 19 inch wheels on an S13 is retarded.

Yea but it was a heck of a deal.. Well i guess ill sell and get 18s

***S14DB*** · 04-04-2012, 12:31 AM

Quote:

Originally Posted by JasianBlazin

is the s14 rear bumper held on by plugs? I popped my trunk today and saw that all the holes have nothing in them :/

Yeah there should be the 2 part plugs in those holes.

bentmode360 · 04-04-2012, 12:49 AM

i have a s14 zenki and my fenders keep bending up everytime i leave a driveway and it scrapes what could i do to stop this? ive seen way lower zenkis scrape and nothing happen to their fenders. is it because i dont have the bumper support?

mau5trap · 04-04-2012, 03:27 AM

whats the difference between A "True" manual rack or No P/S rack?

hatin' · 04-04-2012, 05:37 AM

I've got some old tires laying around in my garage that are the perfect size for these new rims I want to buy, and still have a good amount of tread left. They're old, but not that used, would I be safe stretching them? Or should I buy a whole new set. I just don't see the point in wasting good tires, but I don't know if anyone's ever tried stretching old tires. (old being maybe 3 or 4 years old, these aren't from like the 90s lol.)

axiomatik · 04-04-2012, 10:40 AM

Quote:

Originally Posted by MeGusta.jpeg

i got a problem.

today i let my car idle for a while while working on something, after 10-15 mins the car started idle rough and had a strong smell of gas. first time this happened, the car has been sitting for a while but i usually start it and let it idle every other day or so. its a stock dual cam KA.

possibly leaking injector.

PeaceOnesxWai · 04-04-2012, 02:03 PM

Quote:

Originally Posted by mau5trap

whats the difference between A "True" manual rack or No P/S rack?

True manual steering racks has no line going/coming from a Power steering pump, it is fully enclosed and was purposely built that way. No Power steering rack may mean that the person took the belt off/ took the pump off

mau5trap · 04-04-2012, 02:18 PM

Quote:

Originally Posted by PeaceOnesxWai

True manual steering racks has no line going/coming from a Power steering pump, it is fully enclosed and was purposely built that way. No Power steering rack may mean that the person took the belt off/ took the pump off

icic, what's the difference in function??

oscarsx · 04-04-2012, 02:24 PM

what injectors are available for a single cam KA with a T3 set up? plug n play preferred.

Sent from my DROID X2

daftphunk · 04-04-2012, 02:56 PM

Quote:

Originally Posted by daftphunk

Just wanted to make sure on this:

I have an S13 Blacktop
I want to go ahead and get a PowerFC, and the one I have found is for a Red top.

From what I have heard, it's just a matter of switching a few wires or something along those lines and it will work just fine.

Can anyone else chime in on this?

Bump it up

BLACKhatchBACK · 04-04-2012, 03:47 PM

Hey guys new to the forum but I have a question if someone has an answer. I am just wondering if the wiring for the type-x sr20 is the same as the regular black or redtop sr20's. I know they have different ECU's but is any of the other wiring different. If anyone knows, or has a link let me know please!

Prophet513 · 04-04-2012, 05:37 PM

Are there crankcase breather filters for s13's?

also of these spark plugs: http://www.ngksparkplugs.com/part_fi...uv/results.asp

is the iridium ix the one i want to get for my mild NA build? and WHERE do i order it...

if the link doesnt work its just the part finder for a '91 240sx and the bottom model BKR5EIX-11

JasianBlazin · 04-04-2012, 06:38 PM

can someone plz tell me the headlight bolts size to the s14? i would bring one to auto zone and compare but i don't have any. thanks.

leung · 04-04-2012, 07:29 PM

Quote:

Originally Posted by BLACKhatchBACK

Hey guys new to the forum but I have a question if someone has an answer. I am just wondering if the wiring for the type-x sr20 is the same as the regular black or redtop sr20's. I know they have different ECU's but is any of the other wiring different. If anyone knows, or has a link let me know please!

Yes the wiring is different for the J4 ecu's. Shouldn't be too big of a difference though.

Quote:

Originally Posted by Prophet513

Are there crankcase breather filters for s13's?

Yes but they're not recommended, get a oil catch can instead.

machuca212 · 04-04-2012, 08:02 PM

NISSAN KNOWLEDGE NEEDED

anybody know of any nissan wheels that have 2.5 inch center caps?

KiLLeR2001 · 04-04-2012, 08:10 PM

Quote:

Originally Posted by machuca212

NISSAN KNOWLEDGE NEEDED

anybody know of any nissan wheels that have 2.5 inch center caps?

Better go to a Nissan dealership and start measuring LOL.

Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

machuca212 · 04-04-2012, 08:16 PM

Quote:

Originally Posted by KiLLeR2001

Better go to a Nissan dealership and start measuring LOL.

yea i figured id have to go up there and bother the people at the parts counter. just wanted to see if anyone might have known off the top of their head

PeaceOnesxWai · 04-04-2012, 08:32 PM

Quote:

Originally Posted by mau5trap

icic, what's the difference in function??

Manual steering racks are stronger. De-powered racks are weaker due to the lack of fluid it uses to create power/pressure.

s13 loverr · 04-04-2012, 09:40 PM

I need to know if this is a two way or not. I am trying to find out for a sale-thanks!

blessedhellrider · 04-04-2012, 09:57 PM

dude it wrapped in ,"bitch i suffocate you plastic" fetish clothing? fuuuk i dont know!

Pandaaaa · 04-04-2012, 11:55 PM

Have an s13 Kade 175 across the board compression test but my car has no power whatsoever any diagnostics on what's wrong with it?

bejota180sx · 04-05-2012, 12:59 AM

i don't really have time to check this out myself so i thought i might trust your experience... im about to fill the stock mounts this weekend, but can i rest my SR engine on the bases without damaging anything? i think the oil pan might hit the crossmember before the steel bases rest on the crossmember right? will leaving it held up by the trans (the kinda safe part to raise the engine) a few days while the poly cures damage anything?

upsdude · 04-05-2012, 01:04 AM

ok i guess i suck at searching but i've only got so much time to get my car running so i can drive to work lol. but does it matter if the engine harness of an s14 is auto or manual? i've got a 98 5 spd that need a new engine harness but so far the ones i've found are either auto or the seller can't tell. it's the lower harness that matters for that no?

also is the lower harness year specific...meaning does a 95-96 lower harness only work in the zenki or is that stuff totally interchangeable?

04-04-2012, 03:27 AM	#10301
mau5trap Zilvia FREAK! Join Date: Dec 2009 Location: los ganjales///OC Posts: 1,417 Trader Rating: (8) Feedback Score: 8 reviews	whats the difference between A "True" manual rack or No P/S rack? __________________

04-04-2012, 02:24 PM	#10306
oscarsx Zilvia Addict Join Date: Apr 2006 Location: SoCal Posts: 697 Trader Rating: (6) Feedback Score: 6 reviews	what injectors are available for a single cam KA with a T3 set up? plug n play preferred. Sent from my DROID X2 __________________ IG: @ozc2jz

04-04-2012, 03:47 PM	#10308
BLACKhatchBACK Join Date: Apr 2012 Location: Pullman Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	180sx type-x sr20det Hey guys new to the forum but I have a question if someone has an answer. I am just wondering if the wiring for the type-x sr20 is the same as the regular black or redtop sr20's. I know they have different ECU's but is any of the other wiring different. If anyone knows, or has a link let me know please!

04-04-2012, 05:37 PM	#10309
Prophet513 Leaky Injector Join Date: Nov 2011 Location: Cincinnati, OH Age: 32 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	Are there crankcase breather filters for s13's? also of these spark plugs: http://www.ngksparkplugs.com/part_fi...uv/results.asp is the iridium ix the one i want to get for my mild NA build? and WHERE do i order it... if the link doesnt work its just the part finder for a '91 240sx and the bottom model BKR5EIX-11 __________________ time for a v8

04-03-2012, 03:45 PM	#10292
JasianBlazin Zilvia Addict Join Date: Oct 2010 Location: Central California Posts: 941 Trader Rating: (24) Feedback Score: 24 reviews	is the s14 rear bumper held on by plugs? I popped my trunk today and saw that all the holes have nothing in them :/

04-03-2012, 05:47 PM	#10294
MeGusta.jpeg Join Date: Jan 2012 Location: Portland Age: 33 Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	i got a problem. today i let my car idle for a while while working on something, after 10-15 mins the car started idle rough and had a strong smell of gas. first time this happened, the car has been sitting for a while but i usually start it and let it idle every other day or so. its a stock dual cam KA.

04-03-2012, 05:52 PM	#10295
blessedhellrider Zilvia Member Join Date: Jan 2012 Location: tampaish Age: 42 Posts: 277 Trader Rating: (0) Feedback Score: 0 reviews	busted fuel line ?

04-03-2012, 08:04 PM	#10296
PeaceOnesxWai Zilvia FREAK! Join Date: Mar 2010 Location: SoCal Age: 32 Posts: 1,220 Trader Rating: (34) Feedback Score: 34 reviews	So i picked up a set of Volk RE30s for a low low price.. problem is i only have 3 wheels and they are 19x10s +22 front and 19x11s +25 rear. .. What should i do? Sell them or order the 4th wheel and run them on my Supermade s13?

04-04-2012, 12:49 AM	#10300
bentmode360 Zilvia Member Join Date: Mar 2010 Location: socal Age: 33 Posts: 258 Trader Rating: (8) Feedback Score: 8 reviews	i have a s14 zenki and my fenders keep bending up everytime i leave a driveway and it scrapes what could i do to stop this? ive seen way lower zenkis scrape and nothing happen to their fenders. is it because i dont have the bumper support?

04-04-2012, 05:37 AM	#10302
hatin' Join Date: Jan 2012 Location: Detroit Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	I've got some old tires laying around in my garage that are the perfect size for these new rims I want to buy, and still have a good amount of tread left. They're old, but not that used, would I be safe stretching them? Or should I buy a whole new set. I just don't see the point in wasting good tires, but I don't know if anyone's ever tried stretching old tires. (old being maybe 3 or 4 years old, these aren't from like the 90s lol.)

04-04-2012, 06:38 PM	#10310
JasianBlazin Zilvia Addict Join Date: Oct 2010 Location: Central California Posts: 941 Trader Rating: (24) Feedback Score: 24 reviews	can someone plz tell me the headlight bolts size to the s14? i would bring one to auto zone and compare but i don't have any. thanks.

04-04-2012, 08:02 PM	#10312
machuca212 Leaky Injector Join Date: Nov 2010 Location: indiana Age: 30 Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	NISSAN KNOWLEDGE NEEDED anybody know of any nissan wheels that have 2.5 inch center caps?

04-04-2012, 09:57 PM	#10317
blessedhellrider Zilvia Member Join Date: Jan 2012 Location: tampaish Age: 42 Posts: 277 Trader Rating: (0) Feedback Score: 0 reviews	dude it wrapped in ,"bitch i suffocate you plastic" fetish clothing? fuuuk i dont know!

04-04-2012, 11:55 PM	#10318
Pandaaaa Leaky Injector Join Date: Feb 2012 Location: Valencia Age: 31 Posts: 58 Trader Rating: (6) Feedback Score: 6 reviews	Have an s13 Kade 175 across the board compression test but my car has no power whatsoever any diagnostics on what's wrong with it?

04-05-2012, 01:04 AM	#10320
upsdude Post Whore! Join Date: Apr 2009 Location: Fontana (the good part) Posts: 2,721 Trader Rating: (46) Rides Gallery: upsdude Feedback Score: 46 reviews	ok i guess i suck at searching but i've only got so much time to get my car running so i can drive to work lol. but does it matter if the engine harness of an s14 is auto or manual? i've got a 98 5 spd that need a new engine harness but so far the ones i've found are either auto or the seller can't tell. it's the lower harness that matters for that no? also is the lower harness year specific...meaning does a 95-96 lower harness only work in the zenki or is that stuff totally interchangeable?