S15 from Moscow + LS376/480 - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blades13.5 · 04-29-2012, 10:28 AM

Maladiets! I married a ukranian girl whos teaching me russian. Ochen horosho machina. I like it alot! Keep posting!

Georgiy Stepanyan · 05-01-2012, 12:57 PM

Have a problem with transmission fitment, I have quicktime 8020, camaro t56, monster clutch. The gap between bellhouse and engine about 5mm. Today my friend start making spacers under bellhouse and slave cylinder. Photos soon ^)

Georgiy Stepanyan · 05-18-2012, 05:02 PM

Transmission problem solved

Georgiy Stepanyan · 05-29-2012, 01:14 AM

Finish line =)

psychos13 · 05-29-2012, 03:54 AM

nice build

KansaiDrifter · 06-03-2012, 09:08 PM

Hey that blue silicon hose that's plugged off with a bolt above the upper radiator hose is the steam vent for the heads, you need to run that in to the radiator or you will bow head gaskets left and right! You should run it into the radiator, you can run it into the radiator hose like a temp gauge block or have a fitting welded into the radiator. Could also run a swirl pot and run that into it. That hose lets the heads bleed air/steam out really nice when it's hooked up right.

Pstl_pete · 06-03-2012, 10:11 PM

Quote:

Originally Posted by KansaiDrifter

Hey that blue silicon hose that's plugged off with a bolt above the upper radiator hose is the steam vent for the heads, you need to run that in to the radiator or you will bow head gaskets left and right! You should run it into the radiator, you can run it into the radiator hose like a temp gauge block or have a fitting welded into the radiator. Could also run a swirl pot and run that into it. That hose lets the heads bleed air/steam out really nice when it's hooked up right.

YES! Great point. There are several options, I just welded a bung onto my radiator and ran the line there but whatever you do dont go ripping on the motor with the steam port plugged.

Georgiy Stepanyan · 06-04-2012, 01:49 AM

Quote:

Originally Posted by KansaiDrifter

Hey that blue silicon hose that's plugged off with a bolt above the upper radiator hose is the steam vent for the heads, you need to run that in to the radiator or you will bow head gaskets left and right! You should run it into the radiator, you can run it into the radiator hose like a temp gauge block or have a fitting welded into the radiator. Could also run a swirl pot and run that into it. That hose lets the heads bleed air/steam out really nice when it's hooked up right.

I already weld a tube on my radiator and connect them, but thanks for advice!
I have a strange problem, I run engine... few minutes and radiator are hot, and spals are working... but the oil cooler and oil filter still cold. How it could be??

Georgiy Stepanyan · 06-04-2012, 01:51 AM

Quote:

Originally Posted by Pstl_pete

YES! Great point. There are several options, I just welded a bung onto my radiator and ran the line there but whatever you do dont go ripping on the motor with the steam port plugged.

Pete what the normal water temperature you have with this engine?

Georgiy Stepanyan · 06-04-2012, 01:54 AM

danee · 06-04-2012, 03:50 AM

Awesome

Darren · 06-04-2012, 08:36 AM

Looks amazing! Nice to see what's happening in the Russian Scene!

TinMan09 · 06-04-2012, 02:59 PM

fantastic build. I love the videos. I cant wait to see more with the LS.

Georgiy Stepanyan · 06-12-2012, 02:32 PM

so it's done! first race, and some problems... I never before try to race on NA engine. But yesterday on the 4th gear in drift, I can't take maximum rpm... only 4500-4800. What can I do with this? Maybe setup stock ECU, or what? Enough torque, but not enough rpm... gas pedal on the floor..

gretz · 06-12-2012, 02:57 PM

cams? If you stay NA, Cams are the way to go for high RPM fun...

Georgiy Stepanyan · 06-12-2012, 03:40 PM

there are already hot cam, this is LS 376/480

Georgiy Stepanyan · 06-15-2012, 08:46 AM

on the tests =)

robots · 06-19-2012, 04:55 AM

Video davai ))

ixfxi · 06-19-2012, 10:04 AM

this thread is proof why russians and americans, and car enthusiasts from all over the world can and do get along. damn politicians are the ones making us fight.

and now we quote rocky 4
"During this fight, I've seen a lot of changing, in the way you feel about me, and in the way I feel about you. In here, there were two guys killing each other, but I guess that's better than twenty million. I guess what I'm trying to say, is that if I can change, and you can change, everybody can change! "

this goes down as one of the best threads on zilvia. why? because vodka, because racecar

Georgiy Stepanyan · 06-19-2012, 04:05 PM

Quote:

Originally Posted by robots

Video davai ))

skoro!)

all night we drift on the streets only for this one shot!) next week we start making new video

future · 06-19-2012, 04:16 PM

Thanks for the new lock screen picture

keifer · 06-19-2012, 07:22 PM

Like the guy above me ^^^
thanks for the new background on my macbook

awesome build! you're an amazing drifter

robots · 06-28-2012, 04:23 PM

https://vimeo.com/44827008 mozhet v temu budet

chokudoriS13 · 11-23-2012, 01:27 AM

tiho chto to. Gde update?

Sent from a rotary-dial phone using Edna the Small Town Operator

05-01-2012, 12:57 PM	#62
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	Have a problem with transmission fitment, I have quicktime 8020, camaro t56, monster clutch. The gap between bellhouse and engine about 5mm. Today my friend start making spacers under bellhouse and slave cylinder. Photos soon ^) __________________

05-18-2012, 05:02 PM	#63
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	Transmission problem solved __________________

05-29-2012, 01:14 AM	#64
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	Finish line =) __________________

05-29-2012, 03:54 AM	#65
psychos13 Zilvia FREAK! Join Date: Dec 2010 Location: Long Beach, Ca Age: 32 Posts: 1,184 Trader Rating: (13) Feedback Score: 13 reviews	nice build __________________ UNDER DESTRUCTION!: 91 s13 Top Secret Build

06-03-2012, 09:08 PM	#66
KansaiDrifter Zilvia Addict Join Date: Oct 2006 Location: Marysville, WA Age: 38 Posts: 615 Trader Rating: (6) Feedback Score: 6 reviews	Hey that blue silicon hose that's plugged off with a bolt above the upper radiator hose is the steam vent for the heads, you need to run that in to the radiator or you will bow head gaskets left and right! You should run it into the radiator, you can run it into the radiator hose like a temp gauge block or have a fitting welded into the radiator. Could also run a swirl pot and run that into it. That hose lets the heads bleed air/steam out really nice when it's hooked up right. __________________

04-29-2012, 10:28 AM	#61
blades13.5 Zilvia Junkie Join Date: Mar 2011 Location: Dallas, TX Age: 33 Posts: 316 Trader Rating: (4) Feedback Score: 4 reviews	Maladiets! I married a ukranian girl whos teaching me russian. Ochen horosho machina. I like it alot! Keep posting!

06-04-2012, 01:54 AM	#70
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	__________________

06-04-2012, 03:50 AM	#71
danee Join Date: Mar 2012 Location: Sweden Age: 34 Posts: 40 Trader Rating: (0) Feedback Score: 0 reviews	Awesome __________________ C=(-_-Q)

06-04-2012, 08:36 AM	#72
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 48 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	Looks amazing! Nice to see what's happening in the Russian Scene!

06-04-2012, 02:59 PM	#73
TinMan09 Leaky Injector Join Date: May 2012 Location: El Paso, Tx Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	fantastic build. I love the videos. I cant wait to see more with the LS.

06-12-2012, 02:32 PM	#74
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	so it's done! first race, and some problems... I never before try to race on NA engine. But yesterday on the 4th gear in drift, I can't take maximum rpm... only 4500-4800. What can I do with this? Maybe setup stock ECU, or what? Enough torque, but not enough rpm... gas pedal on the floor.. __________________

06-12-2012, 02:57 PM	#75
gretz Leaky Injector Join Date: Apr 2008 Location: Alberta Age: 38 Posts: 148 Trader Rating: (1) Feedback Score: 1 reviews	cams? If you stay NA, Cams are the way to go for high RPM fun...

06-12-2012, 03:40 PM	#76
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	there are already hot cam, this is LS 376/480 __________________

06-15-2012, 08:46 AM	#77
Georgiy Stepanyan Join Date: Nov 2011 Location: Moscow Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	on the tests =) __________________

06-19-2012, 04:55 AM	#78
robots Leaky Injector Join Date: May 2008 Location: Beijing, China Age: 39 Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	Video davai ))

06-19-2012, 10:04 AM	#79
ixfxi Post Whore! Join Date: Apr 2006 Location: bangin on my chest Account: BANNED #fucksupreme Age: 82 Posts: 5,932 Trader Rating: (3) Feedback Score: 3 reviews	this thread is proof why russians and americans, and car enthusiasts from all over the world can and do get along. damn politicians are the ones making us fight. and now we quote rocky 4 "During this fight, I've seen a lot of changing, in the way you feel about me, and in the way I feel about you. In here, there were two guys killing each other, but I guess that's better than twenty million. I guess what I'm trying to say, is that if I can change, and you can change, everybody can change! " this goes down as one of the best threads on zilvia. why? because vodka, because racecar

06-19-2012, 07:22 PM	#82
keifer Leaky Injector Join Date: Jun 2011 Location: Rochester, NY Posts: 111 Trader Rating: (0) Feedback Score: 0 reviews	Like the guy above me ^^^ thanks for the new background on my macbook awesome build! you're an amazing drifter

06-28-2012, 04:23 PM	#83
robots Leaky Injector Join Date: May 2008 Location: Beijing, China Age: 39 Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	https://vimeo.com/44827008 mozhet v temu budet

11-23-2012, 01:27 AM	#84
chokudoriS13 Zilvia FREAK! Join Date: Oct 2002 Location: Los Angeles, CA Age: 43 Posts: 1,019 Trader Rating: (0) Feedback Score: 0 reviews	tiho chto to. Gde update? Sent from a rotary-dial phone using Edna the Small Town Operator __________________ S13/86/Miatas/DR30/MX83/E36 M3/S60R/E30 M3 -gone! Now: Porsche 993/MK6 GTI