s14 Ka24de DOHC Maf/ s14 Ka24de 3C ecu/s14 oem fogs w/ brackets - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

project_sr20det · 05-30-2008, 05:36 PM

Make/Model: 95SE Zenki 240sx/se KA 5speed

Just finished doing a swap on my "daily" and she left me these parts, all of the parts were boxed up during the swap to protect them from damage, all parts are in good condition no cracks or dents anywhere unless otherwise stated, also have some mis. parts not from swap

All parts are very much negotiable, shot me an offer and you will get a quick response

Paypal info: [email protected]

- s14 sr20det flywheel -- $40 shipped
(got stock sr clutch if need as well)

- s14 ka24de DOHC Maf -- $35 shipped

- s14 ka24de 5speed 3C ecu -- $60 shipped

- s14 se fogs w/ brackets -- $110 shipped

-SR Cam Angle Sensor -- $40 shipped
(Never cranked motor with this CAS, was replaced wiht another one because of crack on sensor
also needs new rubber gasket, don't know if it works or not, but sensor can be replaced)

-KA Clutch Slave Cylinder -- $35 shipped

-95-96 S14 Driver-side power window/lock switches-- $45 shipped
(driver-side window switch is not as firm as brand new but still works good)

-S14 KA radiator fan -- $30 shipped

-S14 Power moonroof switches/light -- $20 shipped

-S14 se front lip -- $50 you pay shipping
(lip has scrap damage as you can see but no major cracks, needs to be repainted)

Paypal info: [email protected]

DriftSwift · 05-30-2008, 06:03 PM

Where are you located at?!? interested in your MAF

project_sr20det · 05-30-2008, 07:02 PM

located in Louisiana

project_sr20det · 05-31-2008, 01:45 PM

Bump Bump Bump

project_sr20det · 06-26-2008, 01:43 PM

New stuff added bump bump

d1spec_drifter · 09-30-2008, 04:48 AM

i could use that ecu BAD.
get back to me ASAP

enjoisk8board891 · 09-30-2008, 09:45 AM

ill take the fog brackets if your willing to part them out. let me know!

Wreckless35 · 09-30-2008, 10:11 AM

does anybody know if the zenki fogs will fit in the usdm SE kouki bumper?

SilviaSlut_39 · 02-27-2014, 08:32 PM

Do you still have the power window switch?!?!?!

05-30-2008, 05:36 PM	#1
project_sr20det Zilvia Member Join Date: Jan 2007 Location: lafayette Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	s14 Ka24de DOHC Maf/ s14 Ka24de 3C ecu/s14 oem fogs w/ brackets Make/Model: 95SE Zenki 240sx/se KA 5speed Just finished doing a swap on my "daily" and she left me these parts, all of the parts were boxed up during the swap to protect them from damage, all parts are in good condition no cracks or dents anywhere unless otherwise stated, also have some mis. parts not from swap All parts are very much negotiable, shot me an offer and you will get a quick response Paypal info: [email protected] - s14 sr20det flywheel -- $40 shipped (got stock sr clutch if need as well) - s14 ka24de DOHC Maf -- $35 shipped - s14 ka24de 5speed 3C ecu -- $60 shipped - s14 se fogs w/ brackets -- $110 shipped -SR Cam Angle Sensor -- $40 shipped (Never cranked motor with this CAS, was replaced wiht another one because of crack on sensor also needs new rubber gasket, don't know if it works or not, but sensor can be replaced) -KA Clutch Slave Cylinder -- $35 shipped -95-96 S14 Driver-side power window/lock switches-- $45 shipped (driver-side window switch is not as firm as brand new but still works good) -S14 KA radiator fan -- $30 shipped -S14 Power moonroof switches/light -- $20 shipped -S14 se front lip -- $50 you pay shipping (lip has scrap damage as you can see but no major cracks, needs to be repainted) Paypal info: [email protected] Last edited by project_sr20det; 06-26-2008 at 01:43 PM..

05-30-2008, 06:03 PM	#2
DriftSwift Zilvia Member Join Date: Aug 2006 Location: The LA area Posts: 204 Trader Rating: (0) Feedback Score: 0 reviews	Where are you located at?!? interested in your MAF __________________ Team Outkast So Cal Division Reppin since 1993

09-30-2008, 04:48 AM	#6
d1spec_drifter Join Date: Sep 2006 Location: austin, texas Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	do you still have the S14 ecu? i could use that ecu BAD. get back to me ASAP __________________ 95' 240sx/silvia 500 rwhp KA26DET

05-30-2008, 07:02 PM	#3
project_sr20det Zilvia Member Join Date: Jan 2007 Location: lafayette Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	located in Louisiana

05-31-2008, 01:45 PM	#4
project_sr20det Zilvia Member Join Date: Jan 2007 Location: lafayette Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	Bump Bump Bump

06-26-2008, 01:43 PM	#5
project_sr20det Zilvia Member Join Date: Jan 2007 Location: lafayette Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	New stuff added bump bump

09-30-2008, 09:45 AM	#7
enjoisk8board891 Zilvia Junkie Join Date: Mar 2008 Location: Illinois Age: 34 Posts: 324 Trader Rating: (6) Feedback Score: 6 reviews	ill take the fog brackets if your willing to part them out. let me know!

09-30-2008, 10:11 AM	#8
Wreckless35 Zilvia Member Join Date: Aug 2008 Location: Northern VA Age: 38 Posts: 232 Trader Rating: (4) Feedback Score: 4 reviews	does anybody know if the zenki fogs will fit in the usdm SE kouki bumper?

02-27-2014, 08:32 PM	#9
SilviaSlut_39 Join Date: Feb 2013 Location: Japan, okinawa/ Oceanside CA Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	Do you still have the power window switch?!?!?!