Rb25 240 Build - Page 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TrustS13 · 08-02-2011, 09:12 AM

I think you blew the 10A fuse, I blew it in mine and had similar issues, check your fuse box.

It's the 3rd to last on the left side. While you're there, might as well check all the fusees. You can get a fuse puller/tester for like 5 bucks at your local parts store. LMK if this helps.

TwoHarbors240 · 08-02-2011, 09:47 PM

I already have a puller/tester. thanks for the info! once i have some time after work ill look into it. thanks again

TwoHarbors240 · 08-02-2011, 09:51 PM

It may not run perfect or have all the wiring issues worked out, but it alteast looks complete and finished. here is the final product

MVI_0313.mp4 video by Udee07 - Photobucket

s13_rb25 · 08-14-2011, 08:07 PM

Awesome Build! my car will be getting a new heart in the near future! i have a rb20. i wanna do a 25 or a 2j. trying to stay out of the ls money pit but its tempting.

TwoHarbors240 · 08-18-2011, 08:06 AM

So im pretty sure the problem was the 75amp alternator fuse, but the problem is when I put the fuse in it blows it every time. The one I had in it, and the one I just got in the mail the other day. Guessing I have something grounded that shouldnt be? Any ideas??

TwoHarbors240 · 08-23-2011, 02:20 PM

got everything sorted out, she's just about ready to go!

g_mac530 · 08-23-2011, 10:46 PM

Swap looks awesome! What was the issue you were having?

TwoHarbors240 · 08-24-2011, 01:39 PM

ahh the 75amp alternator fuse was blown, I just overlooked it before. after i put one in everything worked as it should. so besides a tune its ready to go

TwoHarbors240 · 08-28-2011, 06:27 PM

So im having some overboosting problems. my wastegate has a 1.0 bar spring in it, but for some reason the gauge is telling me its boosting to like 30lbs... Idk if the gauge is dicked up, or if it could be something else. Any ideas??

omgRWDgoodness! · 08-28-2011, 06:58 PM

How did it feel/run before you replaced the fuse? I've been trying to figure out why my RB feels so slow. It starts up, idles, and drives more or less fine but just doesn't haul ass like it should when I get on it. It sucks

TwoHarbors240 · 08-28-2011, 09:18 PM

It ran the same, just fine, just some of the electrical shit didnt work. that fuse should have nothing to do with how your car runs. sounds like you have some other kinds of problems bro

rb20240sx · 09-12-2011, 09:48 AM

Quote:

Originally Posted by TwoHarbors240

I would never put that cover over this motor, to each their own, but i do not like them at all so it will be staying the way that is. haha

Well do you have your stock neo coil cover?

Ever figure out your overboosting issue. And motor looks great post a vid for sound

s13Kurt · 09-12-2011, 02:05 PM

Quote:

Originally Posted by omgRWDgoodness!

How did it feel/run before you replaced the fuse? I've been trying to figure out why my RB feels so slow. It starts up, idles, and drives more or less fine but just doesn't haul ass like it should when I get on it. It sucks

Have you checked your mechanical timing?

TwoHarbors240 · 10-19-2011, 11:11 PM

Done for this year. More to come this winter!

95BoostedS14 · 10-19-2011, 11:44 PM

Awesome build man, keep up the good work

sleeper108 · 10-20-2011, 02:38 PM

you mentioned having a plug and play harness? Where did you get it from? that is the part of my swap I am most concerned about, and unfortunately I am almost tapped out of cash! I am unsure I trust myself for the wiring, so I'm hoping people will have better options out there

S14DOOD · 10-20-2011, 02:52 PM

Beautiful car man!

TwoHarbors240 · 10-23-2011, 10:52 AM

Quote:

Originally Posted by sleeper108

you mentioned having a plug and play harness? Where did you get it from? that is the part of my swap I am most concerned about, and unfortunately I am almost tapped out of cash! I am unsure I trust myself for the wiring, so I'm hoping people will have better options out there

The guy that I bought it from had already had it done, so it was done for me..so I just meant that it was plug and play for me, lol. I actually have no idea where he had it done or if he did it himself. sorry man

d0ct0r7 · 10-23-2011, 12:01 PM

very clean, motor looks fresh too

RB Me · 10-23-2011, 05:49 PM

looks proper.

TwoHarbors240 · 03-18-2012, 10:05 PM

didnt really do much over the winter months, but got a few things done today so i might as well actually update this..

Got myself a Pioneer CD/DVD Player and also got a j30 LSD from a fellow member on here

pics

TwoHarbors240 · 04-04-2012, 10:29 AM

more updates. Having the car tuned this weekend so I got the hood painted, finished up my exhaust the way that i wanted it, and found a "different" spot for my wideband

TwoHarbors240 · 04-08-2012, 07:49 PM

Dyno day for me

eurogirl · 04-08-2012, 08:12 PM

Beautiful!

TwoHarbors240 · 04-09-2012, 12:11 AM

Got a new shifter bezel from Nissan as well, really cleaned up the look of the interior. Looks much better now IMO, without the painted and sticker bombed bezel.

TwoHarbors240 · 04-11-2012, 12:08 AM

Car made 445whp/340ftlb tq @ 18lbs, but the tune was cut short due to the alternator being bad.. have an alternator on order and the tune should be finished up in the next couple of weeks. Hoping for 20+ lbs and close to if not over 500whp

EjMalernee · 04-11-2012, 12:23 AM

Nice power, should make over 500 on 20+ for sure. I didn't read through everything but what cams do you have?

TwoHarbors240 · 04-11-2012, 12:27 AM

Just has stock cams for the time being, would like to upgrade at some point however

ch7794 · 04-11-2012, 05:09 AM

Nice car. Where did you get that new Bezel from? I need one desperately.thanks.

Initial_R90 · 04-11-2012, 06:32 AM

nice build , how much would you say you have into the motor/swap ?

08-28-2011, 06:58 PM	#100
omgRWDgoodness! Zilvia FREAK! Join Date: Jul 2009 Location: Palm Beach Gardens, FL Age: 33 Posts: 1,498 Trader Rating: (48) Feedback Score: 48 reviews	How did it feel/run before you replaced the fuse? I've been trying to figure out why my RB feels so slow. It starts up, idles, and drives more or less fine but just doesn't haul ass like it should when I get on it. It sucks __________________

08-02-2011, 09:12 AM	#91
TrustS13 Zilvia Addict Join Date: Nov 2008 Location: Greensboro, NC Age: 36 Posts: 631 Trader Rating: (16) Feedback Score: 16 reviews	I think you blew the 10A fuse, I blew it in mine and had similar issues, check your fuse box. It's the 3rd to last on the left side. While you're there, might as well check all the fusees. You can get a fuse puller/tester for like 5 bucks at your local parts store. LMK if this helps.

08-02-2011, 09:47 PM	#92
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	I already have a puller/tester. thanks for the info! once i have some time after work ill look into it. thanks again

08-02-2011, 09:51 PM	#93
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	It may not run perfect or have all the wiring issues worked out, but it alteast looks complete and finished. here is the final product MVI_0313.mp4 video by Udee07 - Photobucket

08-14-2011, 08:07 PM	#94
s13_rb25 Zilvia Addict Join Date: Jun 2010 Location: Orlando, FL Age: 31 Posts: 725 Trader Rating: (8) Feedback Score: 8 reviews	Awesome Build! my car will be getting a new heart in the near future! i have a rb20. i wanna do a 25 or a 2j. trying to stay out of the ls money pit but its tempting.

08-18-2011, 08:06 AM	#95
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	So im pretty sure the problem was the 75amp alternator fuse, but the problem is when I put the fuse in it blows it every time. The one I had in it, and the one I just got in the mail the other day. Guessing I have something grounded that shouldnt be? Any ideas??

08-23-2011, 02:20 PM	#96
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	got everything sorted out, she's just about ready to go!

08-23-2011, 10:46 PM	#97
g_mac530 Zilvia Junkie Join Date: Aug 2007 Location: Allentown, PA Age: 38 Posts: 576 Trader Rating: (11) Feedback Score: 11 reviews	Swap looks awesome! What was the issue you were having?

08-24-2011, 01:39 PM	#98
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	ahh the 75amp alternator fuse was blown, I just overlooked it before. after i put one in everything worked as it should. so besides a tune its ready to go

08-28-2011, 06:27 PM	#99
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	So im having some overboosting problems. my wastegate has a 1.0 bar spring in it, but for some reason the gauge is telling me its boosting to like 30lbs... Idk if the gauge is dicked up, or if it could be something else. Any ideas??

08-28-2011, 09:18 PM	#101
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	It ran the same, just fine, just some of the electrical shit didnt work. that fuse should have nothing to do with how your car runs. sounds like you have some other kinds of problems bro

10-19-2011, 11:11 PM	#104
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Done for this year. More to come this winter!

10-19-2011, 11:44 PM	#105
95BoostedS14 Zilvia Member Join Date: Nov 2010 Location: Orlando, Fl Posts: 155 Trader Rating: (2) Feedback Score: 2 reviews	Awesome build man, keep up the good work

10-20-2011, 02:38 PM	#106
sleeper108 Zilvia Junkie Join Date: Dec 2008 Location: Albuquerque, NM Age: 34 Posts: 511 Trader Rating: (7) Feedback Score: 7 reviews	you mentioned having a plug and play harness? Where did you get it from? that is the part of my swap I am most concerned about, and unfortunately I am almost tapped out of cash! I am unsure I trust myself for the wiring, so I'm hoping people will have better options out there

10-20-2011, 02:52 PM	#107
S14DOOD Leaky Injector Join Date: Nov 2010 Location: Antioch,TN Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Beautiful car man!

10-23-2011, 12:01 PM	#109
d0ct0r7 Join Date: Sep 2011 Location: pasadena Age: 40 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	very clean, motor looks fresh too

10-23-2011, 05:49 PM	#110
RB Me Zilvia Junkie Join Date: Feb 2011 Location: OKC Posts: 473 Trader Rating: (0) Feedback Score: 0 reviews	looks proper.

03-18-2012, 10:05 PM	#111
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	didnt really do much over the winter months, but got a few things done today so i might as well actually update this.. Got myself a Pioneer CD/DVD Player and also got a j30 LSD from a fellow member on here pics

04-04-2012, 10:29 AM	#112
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	more updates. Having the car tuned this weekend so I got the hood painted, finished up my exhaust the way that i wanted it, and found a "different" spot for my wideband

04-08-2012, 07:49 PM	#113
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Dyno day for me

04-08-2012, 08:12 PM	#114
eurogirl Join Date: Apr 2012 Location: Dallas, Georgia Age: 35 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Beautiful!

04-09-2012, 12:11 AM	#115
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Got a new shifter bezel from Nissan as well, really cleaned up the look of the interior. Looks much better now IMO, without the painted and sticker bombed bezel.

04-11-2012, 12:08 AM	#116
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Car made 445whp/340ftlb tq @ 18lbs, but the tune was cut short due to the alternator being bad.. have an alternator on order and the tune should be finished up in the next couple of weeks. Hoping for 20+ lbs and close to if not over 500whp

04-11-2012, 12:23 AM	#117
EjMalernee Zilvia Member Join Date: Jun 2011 Location: Orlando/FL Age: 38 Posts: 181 Trader Rating: (3) Feedback Score: 3 reviews	Nice power, should make over 500 on 20+ for sure. I didn't read through everything but what cams do you have?

04-11-2012, 12:27 AM	#118
TwoHarbors240 Zilvia Member Join Date: Jan 2010 Location: Duluth, MN Posts: 171 Trader Rating: (3) Feedback Score: 3 reviews	Just has stock cams for the time being, would like to upgrade at some point however

04-11-2012, 05:09 AM	#119
ch7794 Join Date: Feb 2012 Location: Transfer, PA Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	Nice car. Where did you get that new Bezel from? I need one desperately.thanks.

04-11-2012, 06:32 AM	#120
Initial_R90 Leaky Injector Join Date: Nov 2006 Location: Eastern PA Age: 34 Posts: 126 Trader Rating: (1) Feedback Score: 1 reviews	nice build , how much would you say you have into the motor/swap ?