NJ RB25 240sx Build up...

[89JDM240sx]

Wassup guys been on here for a while figured i'd share my Rb25 build...

Ok so i have a S13 Hatch that's being built for Time Attack/Drag and some Autox...

The original plan was to build a KA but i've been through my share so i figured i'd go a diff route... " Motor Swap " thought about and chose the Rb... Ok now to so Pics...

How the car sat with the KA still in...

Untitled by 89jdm240sx, on Flickr

I brought a daily so now it was time to get cracking... Pulling out the Old faithful...

Untitled by 89jdm240sx, on Flickr

The next week i got cracking on stripping and cleaning the bay for paint...

Untitled by 89jdm240sx, on Flickr

After grinding and sanding here's the final result of the bay... ( Rustoleum Metallic )

Untitled by 89jdm240sx, on Flickr

Untitled by 89jdm240sx, on Flickr

With the bay finished for now i turn my focus to the inside of the car... Doing a little weight reduction...

Untitled by 89jdm240sx, on Flickr

Untitled by 89jdm240sx, on Flickr

Sound deading removal...

Untitled by 89jdm240sx, on Flickr

Since i had to move the from my driveway i took it to my shop for some lift time...

Untitled by 89jdm240sx, on Flickr

Untitled by 89jdm240sx, on Flickr

Next i started stripping off all the undercoat for chassis welding and repaint...

Untitled by 89jdm240sx, on Flickr

Motor specs: Rb25det Series 2
The goal is to make the most power possible without a stroker kit... the Block was bored .40 over hot tanked, honed, Crank knife edged ( stock)

I ordered my pistons and Rods... Mahle Pistons .40 and Manley Turbo Tuff Rods and ACL bearings...

Untitled by 89jdm240sx, on Flickr

Ordered Greddy Intake Mani...

Untitled by 89jdm240sx, on Flickr

Untitled by 89jdm240sx, on Flickr

The Head:

Untitled by 89jdm240sx, on Flickr

The head recieved a full race port n polish and angle job... All parts for the head are Tomei

Tomei Oil galley Orifice 1.5
Tomei In/Ex Valves
Tomei Dual valve springs
Tomei Poncams 265
Tomei valve guides

Will have pics soon

R33 Diff i picked up:

Untitled by 89jdm240sx, on Flickr

Got the block back from Machine shop...

Untitled by 89jdm240sx, on Flickr

I got my valve covers and brakes powdercoated... R32 GTR brakes

Untitled by 89jdm240sx, on Flickr

Greddy Mani after port n Polish...

Untitled by 89jdm240sx, on Flickr

Untitled by 89jdm240sx, on Flickr

Other parts i have brought:
5 lug conversion
Wiring specialities harness
N1 waterpump
N1 Oil pump with spool gear
Cometic Head gasket
Full OEM gaskit kit
Skyo Mount kit

Have a lot of work at my shop will get more pics up later...

Untitled by 89jdm240sx, on Flickr