sr20det apexi metal gasket reuse with no final head bolt torque? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

R3cK · 04-26-2017, 10:45 AM

hi there

ive already put the head on with a 86x1.5mm apexi gasket
and i did all the torques from a - d
so only the final torque or 90° are missing.

question: i have to put the head down again.. is this possible with the same head gasket?
if yes, do i have to start from the beginning or just do the steps d, e and f (second 90°turn)?

thanks!

04-26-2017, 10:45 AM	#1
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	sr20det apexi metal gasket reuse with no final head bolt torque? hi there ive already put the head on with a 86x1.5mm apexi gasket and i did all the torques from a - d so only the final torque or 90° are missing. question: i have to put the head down again.. is this possible with the same head gasket? if yes, do i have to start from the beginning or just do the steps d, e and f (second 90°turn)? thanks!