Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 05-15-2005, 08:05 PM   #1
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
1st time at the track

Hey guys i finally got the 240 going and took her to the track today, went to hte worst possible one (as far as track prep and elevation) but still suprised the heck out of myself. Tell me what you guys think of my times and where i could improve my driving...

reaction-----.3180
60ft---------2.1948
330 ft-------6.2980
1/8 et-------9.66
1/8 mph-----73.30

heres my list of mods
1990 240sx se
s14 ka24de w/ intake mani from s13 and dizzy from s13 (s13 ecu)
pacesetter header
2.75" full exhaust (no cat)
removed all emission stuff
custom cold air intake

Ran these times on a set of used dry rotted tires, and cut springs, so im thinking if i stiffen up my suspension and get some good meat i should be low 9's, my friend that wentwith me has a s13 w/sr20 and his best time was a 9 flat so im not too far off, but im hoping to break 9.5 without any more motor work (just driving experience hopefully). Just wondering also if stiffer suspension will make a big difference in my times? and im also welding up the diff so i can get traction...

try not to flame me too much here, im excited cause everyone told me i wuoldnt break into the 9's with my setup, and my first run of hte day was a 9.7 so i am still SUPER excited. So with a good set of tires, welded diff and stiffer suspension what kind of times should i look for?
jarvis199 is offline   Reply With Quote
Sponsored Links
Old 05-15-2005, 08:12 PM   #2
JuJuBee
Zilvia Member
 
Join Date: Jul 2003
Location: SoCal
Posts: 207
Trader Rating: (0)
JuJuBee is an unknown quantity at this point
Feedback Score: 0 reviews
ummm....very few people compare 1/8th mile times and if you are going to drag its going to be costly
JuJuBee is offline   Reply With Quote
Old 05-15-2005, 08:14 PM   #3
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
dont really want to drag, it was just for fun, all my friends were going and i went, i was just proud cause they all said the fastest s14 up there with my mods was 10.3 , i really dont like drag all that much, but its fun sometimes.
jarvis199 is offline   Reply With Quote
Old 05-15-2005, 08:17 PM   #4
JuJuBee
Zilvia Member
 
Join Date: Jul 2003
Location: SoCal
Posts: 207
Trader Rating: (0)
JuJuBee is an unknown quantity at this point
Feedback Score: 0 reviews
well i dont drag eithgre but from what I have read, your reaction time can improve a lot as well as your 60 ft times

just reducing those will net you noticeable gains without having to spend extra money
JuJuBee is offline   Reply With Quote
Old 05-15-2005, 08:38 PM   #5
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
im not like trying to be cheap or anyhting, i just figure the cheapest way to get faster times is to be a better driver, and im sure ill be going to the track once in a while, so id like to work on my times a little. that along with some better suspension (for autox and drifting also, since those are the main area's id like to compete in)
jarvis199 is offline   Reply With Quote
Old 05-15-2005, 08:54 PM   #6
TheSparo
Zilvia FREAK!
 
Join Date: Sep 2002
Location: Athens/Chattanooga/ Cookeville/Morristown, TN
Age: 38
Posts: 1,141
Trader Rating: (0)
TheSparo is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to TheSparo
actually his reaction times could be 10 min and not change the e/t at all...
__________________
89 240 SR powered...
ummm i promise its stock
TheSparo is offline   Reply With Quote
Old 05-15-2005, 08:58 PM   #7
JuJuBee
Zilvia Member
 
Join Date: Jul 2003
Location: SoCal
Posts: 207
Trader Rating: (0)
JuJuBee is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by TheSparo
actually his reaction times could be 10 min and not change the e/t at all...

hehe that is true

i forgot about that
JuJuBee is offline   Reply With Quote
Old 05-15-2005, 09:29 PM   #8
Flybert
Post Whore!
 
Join Date: Mar 2003
Location: none
Posts: 3,862
Trader Rating: (7)
Flybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfectionFlybert is close to perfection
Feedback Score: 7 reviews
Anyone else think that the title of this thread should be "1st time at the strip"?
Flybert is offline   Reply With Quote
Old 05-15-2005, 09:31 PM   #9
MakotoS13
BANNED
 
MakotoS13's Avatar
 
Join Date: Jan 2004
Location: Texas
Age: 41
Posts: 4,205
Trader Rating: (0)
MakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-known
Feedback Score: 0 reviews
Send a message via AIM to MakotoS13
Quote:
Originally Posted by Flybert
Anyone else think that the title of this thread should be "1st time at the strip"?
not i said the mak.
MakotoS13 is offline   Reply With Quote
Old 05-15-2005, 09:32 PM   #10
MakotoS13
BANNED
 
MakotoS13's Avatar
 
Join Date: Jan 2004
Location: Texas
Age: 41
Posts: 4,205
Trader Rating: (0)
MakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-known
Feedback Score: 0 reviews
Send a message via AIM to MakotoS13
wait wait wait... cut springs?


end yourself NOW.
MakotoS13 is offline   Reply With Quote
Old 05-15-2005, 09:49 PM   #11
zero.counter
Nissanaholic!
 
zero.counter's Avatar
 
Join Date: Jun 2003
Location: At work
Posts: 2,003
Trader Rating: (0)
zero.counter is making a name for him/her selfzero.counter is making a name for him/her self
Feedback Score: 0 reviews
Send a message via AIM to zero.counter
I would prolly let heated springs go, but cut? Thank you, have a nice day and drive thru please...
zero.counter is offline   Reply With Quote
Old 05-15-2005, 10:17 PM   #12
wootwoot
Post Whore!
 
Join Date: Jan 2004
Location: sarasota florida biatch
Age: 38
Posts: 3,850
Trader Rating: (0)
wootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to all
Feedback Score: 0 reviews
Send a message via AIM to wootwoot
cut springs would probably help! more weight transfer, nice! But ditch that crap soon for real soon. Atleast get some nice shocks and some Whiteline springs or something. What was your technique on launching though? We might be able to help with that 60. you should be able to pull a 2.0 off which would help a lot.
__________________
I'm from Florida so I'm probably a bit more strange than you
wootwoot is offline   Reply With Quote
Old 05-16-2005, 06:00 AM   #13
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by MakotoS13
wait wait wait... cut springs?


end yourself NOW.
it wasnt me, they came like that, lol


and i was launching at about 3500, not getting on it too hard till it was finished spinning, i even tried a little lower to keep from spinning and it just bogged, so their really was no middle ground its either i bogged or spun a ton, the track spins a lot tho, i spin less on the street, its one of the worst tracks around for track prep, and i dont think the cut springs HELPED, their is no way, the car shakes and stuff cause one side seems cut lower than the other, i just got the car last week, and it was in pieces when i got it, missing a bunch of stuff too, so i just got it together saturday morning, had an exhaust welded up and went to the track, i was really impressed with its times tho, it was faster than most of the daily drivers there (civics, tegs, tiburons, a few gt's), i love my 240, im about to go pick up some new suspension in a few, so hopefully i may go back next week and see how that helped, either that or their is an autox in the area this weekend too, so i might hit that instead
jarvis199 is offline   Reply With Quote
Old 05-16-2005, 11:25 AM   #14
XxJaPxOxNeEs23xX
Zilvia Junkie
 
XxJaPxOxNeEs23xX's Avatar
 
Join Date: Jun 2003
Location: california
Posts: 572
Trader Rating: (0)
XxJaPxOxNeEs23xX is making a name for him/her selfXxJaPxOxNeEs23xX is making a name for him/her self
Feedback Score: 0 reviews
Send a message via AIM to XxJaPxOxNeEs23xX
i tought the lowest reaction time was .4 cuz of the lights, nd i also thought that the reaction time does add into ur e.t
XxJaPxOxNeEs23xX is offline   Reply With Quote
Old 05-16-2005, 11:27 AM   #15
uno
Zilvia Member
 
Join Date: Mar 2003
Location: Castlewood VA
Age: 42
Posts: 174
Trader Rating: (0)
uno is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via ICQ to uno
Quote:
Originally Posted by XxJaPxOxNeEs23xX
i tought the lowest reaction time was .4 cuz of the lights, nd i also thought that the reaction time does add into ur e.t
only if it's set up in "bracket mode" most street car tracks are set up in free run where reaction time doesn't matter. Good times, i ran a best of 9.7 in my n/a KA last year.
__________________
CA18DET t25, 440CC injectors, Greddy FMIC, Greddy Hot Pipe, Greddy Type RS Bov ,Greddy Turbo Outlet, Trust DP, Motoria 3" Catback , XS Tubular Manifold, Nismo AFPR ,Nismo Engine and Transmission Mounts ,Apex'i SAFC 2 Walbro 255lph, LSD, SPL Subframe Collars, Tein S Tech Springs, Tein Tie Rods, Upper Front and Rear Strut Tower Braces. Black 180sx wheels.
uno is offline   Reply With Quote
Old 05-16-2005, 11:51 AM   #16
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
thanks, what are you running in the ca18? im thinking of doing that swap, i like the fact it has a timing belt instead of a chain and that it revs well, anyway, what else could i do to get better times? just stiffer suspension, lsd, and better tires?

and what all did u have done to your ka when you ran the 9.7? everyone yesterday said the s14 ka's that usually come up that have my mods run 10.1-10.3, so the 9.6 was a shocker
jarvis199 is offline   Reply With Quote
Old 05-16-2005, 12:09 PM   #17
uno
Zilvia Member
 
Join Date: Mar 2003
Location: Castlewood VA
Age: 42
Posts: 174
Trader Rating: (0)
uno is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via ICQ to uno
Quote:
Originally Posted by jarvis199
thanks, what are you running in the ca18? im thinking of doing that swap, i like the fact it has a timing belt instead of a chain and that it revs well, anyway, what else could i do to get better times? just stiffer suspension, lsd, and better tires?

and what all did u have done to your ka when you ran the 9.7? everyone yesterday said the s14 ka's that usually come up that have my mods run 10.1-10.3, so the 9.6 was a shocker
Timing advanced 3 degrees, safc-2 injen full intake, asp crank pulley, hks hiper catback and all season tires in the KA. I haven't ran the CA yet.
__________________
CA18DET t25, 440CC injectors, Greddy FMIC, Greddy Hot Pipe, Greddy Type RS Bov ,Greddy Turbo Outlet, Trust DP, Motoria 3" Catback , XS Tubular Manifold, Nismo AFPR ,Nismo Engine and Transmission Mounts ,Apex'i SAFC 2 Walbro 255lph, LSD, SPL Subframe Collars, Tein S Tech Springs, Tein Tie Rods, Upper Front and Rear Strut Tower Braces. Black 180sx wheels.
uno is offline   Reply With Quote
Old 05-16-2005, 05:32 PM   #18
DMC
Zilvia Addict
 
DMC's Avatar
 
Join Date: Jan 2003
Location: Chesapeake, Va
Posts: 609
Trader Rating: (0)
DMC is an unknown quantity at this point
Feedback Score: 0 reviews
I ran a 10.7 in a beat up old sohc completely stock so i doubt 10.3 with those mods on a dohc is fast
DMC is offline   Reply With Quote
Old 05-16-2005, 06:49 PM   #19
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
well 10.3 was the fastest for anyone here, im hoping to be the first ka-t around here too
jarvis199 is offline   Reply With Quote
Old 05-16-2005, 07:05 PM   #20
Irukandji
Post Whore!
 
Join Date: Jul 2004
Location: Compton
Posts: 4,268
Trader Rating: (0)
Irukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfectionIrukandji is close to perfection
Feedback Score: 0 reviews
Send a message via AIM to Irukandji
Quote:
Originally Posted by jarvis199
well 10.3 was the fastest for anyone here, im hoping to be the first ka-t around here too

umm... ka-t's arent as uncommon as you think...
Irukandji is offline   Reply With Quote
Old 05-16-2005, 07:51 PM   #21
JuJuBee
Zilvia Member
 
Join Date: Jul 2003
Location: SoCal
Posts: 207
Trader Rating: (0)
JuJuBee is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by n1sm0r
umm... ka-t's arent as uncommon as you think...

but he is in kentucky...

so maybe
JuJuBee is offline   Reply With Quote
Old 05-16-2005, 08:24 PM   #22
jarvis199
 
Join Date: May 2005
Location: kentucky
Posts: 34
Trader Rating: (0)
jarvis199 is an unknown quantity at this point
Feedback Score: 0 reviews
yea ive never actually seen one lol, we have 1 sr20det here, and everyone says he is the best and ka-t's suck, and i love the idea of ka-t so thats waht im doing
jarvis199 is offline   Reply With Quote
Old 05-16-2005, 09:03 PM   #23
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
be nice if you got a 1/4 mile track around there.
S14DB is offline   Reply With Quote
Old 05-17-2005, 08:56 AM   #24
420sx
Post Whore!
 
420sx's Avatar
 
Join Date: Jun 2004
Location: Texas
Age: 41
Posts: 3,960
Trader Rating: (0)
420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future420sx has a brilliant future
Feedback Score: 0 reviews
all of a sudden everyone is a drag racer here on zilivia....
__________________
hydropgrahics!
ls1......
420sx is offline   Reply With Quote
Old 05-17-2005, 10:17 AM   #25
MakotoS13
BANNED
 
MakotoS13's Avatar
 
Join Date: Jan 2004
Location: Texas
Age: 41
Posts: 4,205
Trader Rating: (0)
MakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-knownMakotoS13 is making his/her stupidity well-known
Feedback Score: 0 reviews
Send a message via AIM to MakotoS13
shuttup and go back to your drifting pussy
MakotoS13 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net