My Project SR 56K BEWARE!!

[Sileighty_85]

Alright So I only got the rear bumper on cuz weather started to look bad.

Start by removing the four bolts holding the bumper support (two on each side) 14mm


Then remove the 6 nuts(10mm) (3 on each side)



On the passenger side there is a black box (vent thingy)
there are two 10mm nuts on the top
Remove that and get the other 3 nuts




Remove bumper, before pulling bumper compeletly off disconnet the two wires for the licence plate lights


Fucking Tow hook (I'll cut it off later)
*There are also two bolts located on this tow hook you have to remove


undo the crapload of 10 mils from the top of the bumper cover and the weird screw wedge thingys at the bottom and pull the licence plate lights wires through the bumper support dont forget the licence plate too



I painted this part so when I put everything together you wont see the original paint




So instead of using zip ties I reused the bumper cover holder thingys

depending on your kit you might have to waller the holes around until you get a good fit ment




Line up and drill out the holes for the licence plate lights


Painted the lower part cuz I dont ever wanna have to tak it off again




Finally installed after a hour of playing with it


Fitment is GREAT! Very flush




I've hear your not able to use the stock rear bumper support
But mine bolted up with out a problem, with no modification at all
(Bad Pic its more even now)







I'll be doing the side skirts tomorrow if the weather is good



*I highly advise having a buddy to help you install the rear bumper, I did it myself and it sucked so bad

[Sileighty_85]

Side Skirts installed today ^_^



Fitment is very nice




Just like any old car the door sags on the driver side so it made closing the door pretty challanging


So i took my handy dandy dremel again and grinded down the bottom sides of the door to help close it



Its lookin better


So i decided to start painting the car

Prepin for for paint
*My camera for some reason makes the blue look lighter, Its actually darker than the pics show*







Jared helpin me Wet Sand


Looks beautiful Lolz


Now to let it cure

[Dustxking]

That color looks alot like mine, you will love it.

[Gjohnson7]

Looks like it's coming along nice.

[BLKS13]

Would've done for a cleaner kit but looks good!


What are you painting it with? the kind of paint...

[kevtrinh]

100mph entry speed? im calling bs

otherwise cool motor

[Sileighty_85]

Originally Posted by Dustxking

That color looks alot like mine, you will love it.

Its looks darker in person, but dude I Love the hood

Originally Posted by BLKS13

Would've done for a cleaner kit but looks good!

Well its my car not yours, I Liked the Agressive so i'll stick with it.
Thanks anyway

Originally Posted by BLKS13

What are you painting it with? the kind of paint...

Rattle Can, its Krylon Fusion

I've only got one coat on right now, Not wet sanded yet.

Originally Posted by kevtrinh

100mph entry speed? im calling bs

You've never been to Mineral Wells, Texas

It an abandoned air field, more than enough pavement to run

[aa87]

Aero looks hot in person.

[86is300]

damn that's one sexy sexy car...

[SoloSilvia]

Pretty nice build! Impressive! Looks good! 100mph entry speeds sounds like a real good time!

[blueshark123]

its comin out good man alll u need is some jdm tight ballin rims yo lol. +1

[Sileighty_85]

Front Bumper Installed!!!
Finally after one year it has a bumper!!! W0000T

Now i have to relearn how to drive on these roads again without destroying the front bumper lol









Now its time to paint it lol

Originally Posted by blueshark123

alll u need is some jdm tight ballin rims yo lol. +1

Thanks ya'll, Rims will be last thing I get cuz I might go wide body later on

[Erjay1]

cool build. That rattle can paint looks good so far.

[Dustxking]

Rattle can ftw!

Haha thanks man, every one thought my hood was a vinal but nope just krylon all the way.

Dude 100mph entry over here in portland oregon on pir's turns 10 11 and 12.

[Sileighty_85]

Body and Kit Painted

Awaiting paint to cure and then wet sanding

For some reason these two pic show the acutal color of the Paint




I love Rainy Nights

[gerson408]

dude mad props on the paint man do you think i would be able to buff out the krylon army paint?? and do the whole wetsanding thing>??

[dookiedang]

wait...lower than 600 bucks plus the motor?? or lower than 600 for shipping??

[EroGori]

love the sticker on your fender. I really love boobs too.

[Sileighty_85]

Originally Posted by dookiedang

wait...lower than 600 bucks plus the motor?? or lower than 600 for shipping??

Just shipping the engine home Only, but my $600 inculded all my parts and acessories

Ex: Turbos, Intercooler, Spare Parts, Exhaust, Body Parts


If only the engine it would probably only cost you .....300-400 bucks?? cheaper than $600 though

So if you own a 180SX or can pic one up for cheap you can ship the engine and parts home for around $600

But it requires complete dissasembly of the Engine and breaking the Transmission in half.

Originally Posted by gerson408

dude mad props on the paint man do you think i would be able to buff out the krylon army paint?? and do the whole wetsanding thing>??

Thank man now i gotta wet sand it -o- Sigh* I dont see why you couldnt?

[Gymkana101]

Man ..... i'm kinda speechless dude ........
................................................ye a, i got nothing...
just, awesome job bro .............
(my mind just spontaneously combusted)

[NRogge]

looks great man!

[Phaze*2_Mizzark]

the build is looking sick!!

[ecuastyle84]

love the body kit with the kouki wing and paint...keep up the good work

+rep

[baoweezee]

can u list teh steps in which u paint? wet sanding too. im interested in following ur footsteps until i can afford a decent paint job.
and any close up shots of the paint on ur sexy car?

[slide180sx]

Interested in the lights and clutch. Pm.

[Sileighty_85]

Thanks Ya'll for the comments.
I just picked up another S13 for the wife so I'm gonna be teaching her how to build one with this one

Originally Posted by baoweezee

can u list teh steps in which u paint? wet sanding too. im interested in following ur footsteps until i can afford a decent paint job.
and any close up shots of the paint on ur sexy car?

I havent got very far since the first coat

but the process I will be doing is

Sand body with 250 grit
then 400
2x of paint
wet sand 800
2x more coats
wet sand 1,000 then 2,000

[Sileighty_85]

Well its been awhile since I've updated (if anyones cared lol)

I feel like sharing this... Went to Mineral Well last month for a Drift day and on the way home I had 2 of my exhaust bolt fall out (one from the DP-Cat, and Cat-Cat-Back)
so the damn this was draggin home on my 6 hour drive home

well i had to be at work by 11 that night, so i had no time to find a home depot and of course I didnt have any spare bolts long enough. I tried stickin 3/8 rachet extension and zip tieing them down and sticking screw drivers and zip tieing those....with no luck they kept falling out. (RIP)

So I dragged the damn thing for about 100 miles until the cat flang was catchin on the uneven roads So I pulled over for the 3rd time and ripped the damn off on the interstate and crammed it in the back with my other 8 drift rims.

probably the only good thing coming of this is better ground clearance


So luckily it didnt scrape all the way through so i decided to pick up a 3 in pipe cut if in half and weld it to reinforce it.



My handy Dandy Harbor Freight Flux Welder :P

I ended up conforming the metal to the flatness to retain slightly better ground clearance.


ALSO...
Ive been gathering parts for my Tune.



So next month I should be getting Dyno'd Tuned unless I decide to pic up this GT2871 from a co-worker, I really wanna but it depends on price...Its used so maybe it'll be cheap

[s13dan]

i need to meet this "a friend".

[Sileighty_85]

Sup peep kinda a little update, I finally have all my parts for my tune until I decided that I might as well upgrade to a GT2871R since i want more power and not spend the money twice on a tune so my plan is to get tuned around Christmas Time.

But I did Upgrade my lights I had some nice H3C I picked up in Japan but one burned out So I decided to Upgrade to an HID Kit.

Well I dont understand why ppl say that HID's in Silvia Light suck, Mine are F-ing Incredible. Amazing upgrade from regular Halogens.

I ordered a JD Lighting HID Kit from Phase 2 nice kit very easy install.




These Things are Tiny!


Installed




Pimp



I think these Have a Nice Cut off, I still need to adjust them a little bit but still...




Mine point straight, I dont know why ppl are always saying they point to the Right or whatever....
Like I said I need to tweak the a little bit

[iHeartTheTouge]

neatooo!!!!