Urgent Brake Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

lazymbf · 07-25-2008, 10:45 PM

Hi guys, I have searched and not find what I need. I need this fix in a hurry. So thanks guys. my 92 240sx, Driver Rear caliper stuck. I just rebuild the caliper, and I can turn the piston before installation in and out after the rebuild, no leaking after I bled the system and test. but after I install it back, and press the brake, it stuck at certain degree when i turn the wheel, then completely stuck after I try it with the wheel on. the E-brake is good, no problem with release or pull it. Another thing I find out is , car in neutral, if i turn the Pass rear wheel forward, my driver rear wheel won't move, drive shaft turns, hope this help. So I need advice bros. Thank you very much.

SilviaNOW · 07-25-2008, 10:50 PM

sliders could be stuck?

SoguRacing · 07-25-2008, 10:53 PM

i wasn't aware that the rear calipers were rebuildable.

cdlong · 07-26-2008, 07:34 AM

they are, but they suck ass even when rebuilt.

just throwing out some ideas, did you replace the rotor? are you sure it's sitting flat and not binding up anywhere? try disconnecting the parking brake cable. the passenger side cable might be frozen and all the tension is added to the driver's side.

lazymbf · 07-27-2008, 10:04 PM

i replace it with another caliper. it works now..... thanks

07-25-2008, 10:45 PM	#1
lazymbf Join Date: Jun 2005 Location: MD Age: 43 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	Urgent Brake Help Hi guys, I have searched and not find what I need. I need this fix in a hurry. So thanks guys. my 92 240sx, Driver Rear caliper stuck. I just rebuild the caliper, and I can turn the piston before installation in and out after the rebuild, no leaking after I bled the system and test. but after I install it back, and press the brake, it stuck at certain degree when i turn the wheel, then completely stuck after I try it with the wheel on. the E-brake is good, no problem with release or pull it. Another thing I find out is , car in neutral, if i turn the Pass rear wheel forward, my driver rear wheel won't move, drive shaft turns, hope this help. So I need advice bros. Thank you very much.

07-25-2008, 10:53 PM	#3
SoguRacing Post Whore! Join Date: Nov 2007 Location: (714) Age: 38 Posts: 2,967 Trader Rating: (23) Rides Gallery: SoguRacing Feedback Score: 23 reviews	i wasn't aware that the rear calipers were rebuildable. __________________ Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180

07-26-2008, 07:34 AM	#4
cdlong Nissanaholic! Join Date: Jun 2003 Location: Colorado Springs Age: 43 Posts: 1,864 Trader Rating: (0) Rides Gallery: cdlong Feedback Score: 0 reviews	they are, but they suck ass even when rebuilt. just throwing out some ideas, did you replace the rotor? are you sure it's sitting flat and not binding up anywhere? try disconnecting the parking brake cable. the passenger side cable might be frozen and all the tension is added to the driver's side. __________________

07-25-2008, 10:50 PM	#2
SilviaNOW Leaky Injector Join Date: Oct 2007 Location: Calgary alberta Age: 34 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	sliders could be stuck?

07-27-2008, 10:04 PM	#5
lazymbf Join Date: Jun 2005 Location: MD Age: 43 Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	i replace it with another caliper. it works now..... thanks