Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 279 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ktown_drifter · 01-28-2010, 06:48 AM

Quote:

Originally Posted by fliprayzin240sx

Looking sick RAY.. wanna trade for your old rims????????????/ lol

*fliprayzin240sx* · 01-28-2010, 07:50 AM

Quote:

Originally Posted by Ktown_drifter

Looking sick RAY.. wanna trade for your old rims????????????/ lol

Haha...Work Equips for knock off Work Equips. Shit, I wouldnt mind rocking 10/11j again.

ILoveJDM · 01-28-2010, 08:33 AM

Quote:

Originally Posted by Geezy

i didn't know they made TE-37s with concave and lipped like that.
found this on rimtuck.
19 x 9.5 +12
215 / 35
19 x 10.5 +12
235 / 35

only the 19" TE's come with lip like that
that car also belongs to VAs13 on here. i think.
its also been posted in this thread quite a few times, but this car never gets old

Ktown_drifter · 01-28-2010, 08:54 AM

boo didnt know they were knock offs...

Geezy · 01-28-2010, 09:33 AM

Quote:

^^ Bro! ur like a year late..... this car belongs to fellow zilvian! where were u???

playin in the devil's sand box, kid. just starting to catch up with the game.

Quote:

only the 19" TE's come with lip like that
that car also belongs to VAs13 on here. i think.
its also been posted in this thread quite a few times, but this car never gets old

"VIP BALLER TE-37s".

Geezy · 01-28-2010, 09:48 AM

Jesus, how do you drive that?!?!?!

joshls2 · 01-28-2010, 11:47 AM

^^^ Geezy, uuhhh.. you're late on that one as well, lol. why not just post your own pics?

CamryOnBronze · 01-28-2010, 12:21 PM

I want to run my future setup past you guys for some advice. Here is where I left off last fall:

F: 17x9 +12 225/45/17 Yokohama S-Drive (-2 camber)
R: 17x9 +12 245/40/17 Yokohama S-Drive (-2 camber)

Wheel specs were good, but ride height and tire sizing was off. I picked up Johnny's CR Kais and they are being repainted right now. I want to order new tires that fit better and go lower this spring with the full kouki aero. Here is what I am thinking:

F: 17x9 +17 215/45/17 (or 215/40?)
R: 17x9 +12 (5mm spacer) 225/45/17

Interested to see what you guys think. I know it won't be super cambered/aggressive, but I want to keep it semi-streetable with some grip out back. Power is going to be going from about 220whp to 290whp in the spring as well. I think those sizes should fit pretty well from what I have seen in this thread.

InlandCarParts · 01-28-2010, 12:35 PM

Quote:

Originally Posted by Geezy

i didn't know they made TE-37s with concave and lipped like that.
found this on rimtuck.
19 x 9.5 +12
215 / 35
19 x 10.5 +12
235 / 35

Because there Not Real TE-37.

ILoveMyRHS13 · 01-28-2010, 12:38 PM

Quote:

Originally Posted by InlandCarParts

Because there Not Real TE-37.

LMAO.

You're fucking retarded.

kouki fanatic · 01-28-2010, 01:02 PM

Quote:

Originally Posted by inlandcarparts

because there not real te-37.

good lookin out you retard

PoorMans180SX · 01-28-2010, 01:15 PM

Quote:

Originally Posted by CamryOnBronze

I want to run my future setup past you guys for some advice. Here is where I left off last fall:

F: 17x9 +12 225/45/17 Yokohama S-Drive (-2 camber)
R: 17x9 +12 245/40/17 Yokohama S-Drive (-2 camber)

Wheel specs were good, but ride height and tire sizing was off. I picked up Johnny's CR Kais and they are being repainted right now. I want to order new tires that fit better and go lower this spring with the full kouki aero. Here is what I am thinking:

F: 17x9 +17 215/45/17 (or 215/40?)
R: 17x9 +12 (5mm spacer) 225/45/17

Interested to see what you guys think. I know it won't be super cambered/aggressive, but I want to keep it semi-streetable with some grip out back. Power is going to be going from about 220whp to 290whp in the spring as well. I think those sizes should fit pretty well from what I have seen in this thread.

Well first off, if you have the same size and offset, and a smaller tire, you realize it's not going to be as flush, right?

I would recommend 215/40 in the front and 225/40. 45-series sidewall looks goofy if you're going to want to go low. You might need bigger spacers though, depending on what camber you run. You're going to need at least a 5mm spacer in the front and a 10mm in the rear to make up for the thinner tire if you're wanting to rock the same camber specs/same tire flushness.

Or you could just rock a 225/40 up front and a 235/40 in the rear, which would give you a little more grip and less space to fill up with spacers.

Probably what you're going to want to do is just fit the tires and wheels with no spacers, adjust to your lowness and camber specs, and then figure out which spacers to run.

CamryOnBronze · 01-28-2010, 01:24 PM

Good info, thanks man. And yes, I realize a smaller tire will be less flush. I would be fine with running a bit less camber than the -2 degrees I was running. My rear tires got smoked in about 7k miles, but I must have gotten a bad alignment. I wouldn't expect -2 camber to eat a set of tires that fast without the toe or something being off.

PoorMans180SX · 01-28-2010, 01:32 PM

Yeah they definitely shouldn't go away that fast. That's near stock alignment specs on some cars, the tires should last close to their rated length.

Make sure they dial in zero toe this time.

Z33dori · 01-28-2010, 02:06 PM

ppl need to stop suggesting 225/40/17s

b/c there is only 1 company who sells them and they are sub par tires.

***CrimsonRockett*** · 01-28-2010, 02:09 PM

215/40 fronts, 225/45 rears.

Done and done.

eds13 · 01-28-2010, 02:32 PM

Quote:

Originally Posted by Z33dori

ppl need to stop suggesting 225/40/17s

b/c there is only 1 company who sells them and they are sub par tires.

i really liked my nittos when i had them, good tire, lasted a while and was decently grippy.

Quote:

Originally Posted by CrimsonRockett

215/40 fronts, 225/45 rears.

Done and done.

225/45 looks like balls imo, i'm going to be running that on a 9 just because i got a pair for $40.

i'd go with a 215/45 front and rear, so at least you can rotate them if you burn the rears down too much...

225/40's on 17x8+8

Ktown_drifter · 01-28-2010, 02:59 PM

Camryonbronze Id say go 215/45 17 up front the 215 40 17 in honda sizing.. and looks way too small

95KA-Turbo · 01-28-2010, 08:04 PM

I would personally suggest 215/45s up front and 235/40s out back because they're almost exactly the same tire height.

OR do what Ed said and run 215/45s all around...but since your rear is already set up to accept a 245/40 I would say run the 235/40.

-2 shouldn't kill your tires in 7K either. I am pretty sure AP2 S2000s run -2.5 factory.

ILoveMyRHS13 · 01-29-2010, 01:01 AM

Quote:

Originally Posted by Z33dori

ppl need to stop suggesting 225/40/17s

b/c there is only 1 company who sells them and they are sub par tires.

Nitto NT555s are subpar tires?

whiterps13 · 01-29-2010, 01:15 AM

For the price, yes.

ILoveMyRHS13 · 01-29-2010, 01:25 AM

Of course they're expensive, they're not common at all.

Z33dori · 01-29-2010, 01:25 AM

Quote:

Originally Posted by ILoveMyRHS13

Nitto NT555s are subpar tires?

for what you pay for them... if i found some for cheap i'd prolly grab them but... other than that i will never run them. But i'll be honest this opinion is based of driving turbo FWD cars with them... so yea... maybe its a lil biased .. idk give me some maybe ill change my opinions

im still in never ending debat my self of what to run on the front with my 17x9.5s... everyone keeps saying 215/40 or 235/40(replaces 225/45 i have on them)

franklin93zx · 01-29-2010, 01:36 AM

Quote:

Originally Posted by InlandCarParts

Because there Not Real TE-37.

Someone didn't notice that they aren't on nico anymore....

Geezy · 01-29-2010, 04:14 AM

Quote:

Originally Posted by l20bdime

F: 18x9.5 -10 225/40R18 federal -4 degrees camber
R: 18x12 -14 245/40R18 federal -1.5 degrees camber

The front fenders are resting on the tires and it drift just fine like that.

front and rear fenders are Bmagic 30mm front and 50mm rear bowed
out.

And the reason for the big gaps betreen the bumper/fenders/hood is because with the increased angle from modded knuckles i was rubbing on the frame rails so i spaced my fronts out 15mm and my tires are litterally pushing my fenders out.

lol, how does that "drift just fine??"

RULES:

nathanong87 · 01-29-2010, 04:51 AM

Quote:

Originally Posted by Geezy

lol, how does that "drift just fine??"

what don't you understand....

**ThatGuy** · 01-29-2010, 05:08 AM

Geezy, stop posting. If you have questions about someones car, then PM them, but stop cluttering this thread with your ignorance.

tokyo_black_uk · 01-29-2010, 10:52 AM

F: 17" 9J +17
R: 18" 10.5j +5

Final pic has my revised suspension settings:

Front: -2.5 deg
Rear: -3 deg

Needs some thinner tyres next time I replace them..

Nizzan4u2nv · 01-29-2010, 11:42 AM

Quote:

Originally Posted by Geezy

lol, how does that "drift just fine??"

That car was in formula d/d1 from what I remember. So, id say it drifts more then just fine.

Dont think ive put this pic in here before. I still miss this car.

cemtoes · 01-29-2010, 01:33 PM

Quote:

Originally Posted by Geezy

lol, how does that "drift just fine??

are you questioning tommy roberts drifting ability? lololol

01-28-2010, 08:54 AM	#8344
Ktown_drifter Zilvia Member Join Date: Jan 2009 Location: Napanee Ontario Canada Age: 39 Posts: 278 Trader Rating: (0) Feedback Score: 0 reviews	boo didnt know they were knock offs... __________________ 613driftwerks.ca

01-28-2010, 12:21 PM	#8348
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 38 Posts: 3,916 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	I want to run my future setup past you guys for some advice. Here is where I left off last fall: F: 17x9 +12 225/45/17 Yokohama S-Drive (-2 camber) R: 17x9 +12 245/40/17 Yokohama S-Drive (-2 camber) Wheel specs were good, but ride height and tire sizing was off. I picked up Johnny's CR Kais and they are being repainted right now. I want to order new tires that fit better and go lower this spring with the full kouki aero. Here is what I am thinking: F: 17x9 +17 215/45/17 (or 215/40?) R: 17x9 +12 (5mm spacer) 225/45/17 Interested to see what you guys think. I know it won't be super cambered/aggressive, but I want to keep it semi-streetable with some grip out back. Power is going to be going from about 220whp to 290whp in the spring as well. I think those sizes should fit pretty well from what I have seen in this thread. __________________ CamryOnBronze.com

01-28-2010, 01:24 PM	#8353
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 38 Posts: 3,916 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	Good info, thanks man. And yes, I realize a smaller tire will be less flush. I would be fine with running a bit less camber than the -2 degrees I was running. My rear tires got smoked in about 7k miles, but I must have gotten a bad alignment. I wouldn't expect -2 camber to eat a set of tires that fast without the toe or something being off. __________________ CamryOnBronze.com

01-28-2010, 01:32 PM	#8354
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 36 Posts: 5,574 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Yeah they definitely shouldn't go away that fast. That's near stock alignment specs on some cars, the tires should last close to their rated length. Make sure they dial in zero toe this time. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

01-28-2010, 02:06 PM	#8355
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 35 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	ppl need to stop suggesting 225/40/17s b/c there is only 1 company who sells them and they are sub par tires. __________________

01-28-2010, 09:48 AM	#8346
Geezy Zilvia Junkie Join Date: Jul 2009 Location: Las Vegas Posts: 301 Trader Rating: (5) Feedback Score: 5 reviews	Jesus, how do you drive that?!?!?!

01-28-2010, 11:47 AM	#8347
joshls2 Leaky Injector Join Date: Jan 2008 Location: Ahead Of, YOU Age: 37 Posts: 136 Trader Rating: (0) Feedback Score: 0 reviews	^^^ Geezy, uuhhh.. you're late on that one as well, lol. why not just post your own pics?

01-28-2010, 02:59 PM	#8358
Ktown_drifter Zilvia Member Join Date: Jan 2009 Location: Napanee Ontario Canada Age: 39 Posts: 278 Trader Rating: (0) Feedback Score: 0 reviews	Camryonbronze Id say go 215/45 17 up front the 215 40 17 in honda sizing.. and looks way too small __________________ 613driftwerks.ca

01-28-2010, 08:04 PM	#8359
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 38 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	I would personally suggest 215/45s up front and 235/40s out back because they're almost exactly the same tire height. OR do what Ed said and run 215/45s all around...but since your rear is already set up to accept a 245/40 I would say run the 235/40. -2 shouldn't kill your tires in 7K either. I am pretty sure AP2 S2000s run -2.5 factory. __________________ Instagram - SJKnoop

01-29-2010, 01:15 AM	#8361
whiterps13 Zilvia Addict Join Date: Aug 2005 Location: Illinois Age: 36 Posts: 831 Trader Rating: (1) Feedback Score: 1 reviews	For the price, yes. __________________

01-29-2010, 05:08 AM	#8367
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 44 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	Geezy, stop posting. If you have questions about someones car, then PM them, but stop cluttering this thread with your ignorance. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

01-29-2010, 10:52 AM	#8368
tokyo_black_uk Join Date: Jun 2008 Location: UK Age: 41 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	F: 17" 9J +17 R: 18" 10.5j +5 Final pic has my revised suspension settings: Front: -2.5 deg Rear: -3 deg Needs some thinner tyres next time I replace them..